Automobilio uždangalas Kegel, tinka Dacia Sandero, Citroen C3

Trumpai apie prekę

Prekė: Automobilio uždangalas Kegel, tinka Dacia Sandero, Citroen C3. Kategorija: Automobiliui.

• Gamintojas: Kegel-Błażusiak
• Ilgis: 430 cm
• Plotis: 148 cm
• Aukštis: 136 cm

✅ Product advantages:

• multi-season product;
• protection against: snow, frost, rain, wind, leaves, tree juices, UV radiation, bird droppings, flower dust;
• protects against: corrosion, fading, tarnishing of varnish and chrome elements;
• smooth from the bottom material does not scratch the vehicle;
• covers the entire vehicle slightly going under the bottom;
• easy to store and transport - does not take up much space;
• thanks to the attachment with a puller with a rope and additional elastic fastening straps, it firmly holds the vehicle;
• at a positive ambient temperature, it wicks away moisture accumulating under the cover.

⭐ The Basic Garage cover is a highly functional product that will meet the expectations of all customers. The cover of this series of products is very good quality at an affordable price.

⭐ Weather-resistant cover made in the upper part of a highly permeable membrane. It protects against rain, snow, frost and sunlight (harmful UV) and pollution such as dust, bird droppings and tree juices.

⭐ The cover is scattered in colour

⭐ Material Composition: 4 layers

• -two-layer SPUNBOND
• -High-permeable membrane
• - Single-layer SPUNBOND

⭐ The upper part of the cover is made of up to 4-layer material, which is thick, strong and durable. It does not get wet, while wicking moisture away from the cover. Smooth SPUNBOND from the inside, does not scratch the vehicle.

⭐ The sides of the cover are 2-layer, made of double-layer SPUNBOND nonwoven fabric. The sides of the cover are highly vapor-permeable and waterproof. Thanks to this design, water vapor and moisture are constantly discharged to the outside, and water in the rain flows down the side walls of the cover without penetrating under the cover.

➡ Fits the following car models:

• ALFA ROMEO 145
• ALFA ROMEO 147
• ALFA ROMEO 33
• Audi A3
• BMW i3
• Chevrolet Aveo III hatchback
• CITROEN C3 Picasso
• CITROEN C4 Cactus
• CITROEN Xsara
• CITROEN ZX hatchback
• CITROEN ZX station wagon
• DACIA Sandero I / ii
• DAEWOO Lanos hatchback
• DAEWOO Nexia hatchback
• FIAT Brava
• FIAT Bravo I, II
• FIAT Palio Weekend
• FIAT Sedici
• FIAT Stilo
• FORD B-Max
• FORD Escort I, II, V, VI, VII station wagon
• FORD Fiesta VIII
• FORD Focus I hatchback
• HONDA Civic VI hatchback
• HONDA Jazz IV
• HYUNDAI i20 II
• HYUNDAI ix20
• HYUNDAI Pony
• KIA Rio I station wagon
• KIA Venga
• NISSAN Almera I, II
• NISSAN Juke I, II
• NISSAN Note I, II
• OPEL Astra F hatchback
• OPEL Astra H hatchback
• PEUGEOT 207 hatchback / station wagon
• PEUGEOT 307 I, II hatchback
• PEUGEOT 308 I, II hatchback
• RENAULT 19 I, II hatchback
• RENAULT Clio III station wagon
• RENAULT Clio IV hatchback / station wagon
• RENAULT Megane I, II, III hatchback
• RENAULT Megane IV station wagon
• SEAT Leon I, II, III hatchback
• SKODA Fabia I, II, III station wagon
• SKODA Roomster
• SUZUKI Baleno
• SUZUKI Liana hatchback
• SUZUKI Liana station wagon
• SUZUKI SX4 I, II
• TATA Indigo
• TOYOTA Auris I, II hatchback
• TOYOTA Corolla I, II, III, VI, VII, VII, IX, XII station wagon
• TOYOTA Corolla V, VI, VII, VII, IX, XII hatchback
• VOLKSWAGEN Golf II, III, IV, V, VI, VII hatchback
• VOLKSWAGEN Polo III station wagon
• VOLKSWAGEN Polo IV
• VOLVO C30

✅ Selecting Tarpaulin.

When choosing a tarpaulin, we recommend to suggest primarily the shape and length of the car. The determinant is a photo, showing the shape of the car, on which the cover fits.

1. Compare the shape of your car with a photo of the product
2. Measure your car, taking special account of its length.

The textile material from which the tarpaulin is made will fit both a slightly smaller and a larger car with a similar shape and dimension not exceeding the circumference given above.

✅ Dimension:

• Length: 405 - 430 cm
• Height: 126 - 136 cm

➡ Instruction.

Installing Tarpaulin.

1. Put the cover on the clean car side of the cover with the print on the outside.
2. Then pull the drawstring cord of the cover as tightly as possible and tie it securely.
3. The cover in the corners above the fastening ribbing has additional elastic fastening straps sewn in, which will hook to the edge of the bumper when putting it on.
4. When removing the cover, check off the above elastic fastening straps.

⛔ ATTENTION! The cover soiled on the inside should not be used. Cover for use only on a parked car - can not be used when transporting a car on a tow truck.

➡ Packaging composition

• 1 car cover

Specifications