Automobilio užvedimo laidai 600A, 4 m, su dėklu

Trumpai apie prekę

Prekė: Automobilio užvedimo laidai 600A, 4 m, su dėklu. Kategorija: Užvedimo laidai.

• Gamintojas: no brand
• Ilgis: 4 m

Properties

• ▶ Maximum current of 600A allows you to use the wires during emergency start-up of passenger cars, vans and buses
• ▶ The length of 4 m makes it easy to connect two vehicles even when their batteries are not directly next to each other
• ▶ Cable cross-section 10 mm² ensures effective current flow during start-up
• ▶ Solid terminals provide a secure connection to the battery poles
• ▶ Isolated terminal holders increase safety and convenience when connecting wires
• ▶ Thick wires work well during emergency start-up and are adapted to carry high current
• ▶ Flexible design facilitates the arrangement of wires between vehicles
• ▶ Etui included makes it easy to store wires in the trunk and helps you stay organized
• ▶ Useful during winter starts when low temperature reduces battery efficiency

❄ Useful especially in winter

Low temperature can significantly reduce battery efficiency and make it difficult to start the engine. Starter cables allow you to quickly connect a second vehicle and try to restore the possibility of starting without waiting for additional help.

Specification

• Product type: jumper cables
• Maximum current: 600A
• Cable length: 4 m
• Cable cross-sectional area: 10 mm²
• Clamps: strong, insulated
• Etui: yes
• Application: cars, vans, buses
• Purpose: emergency start of a vehicle with a discharged battery

Composition of the set

• Starting cables 600A 4 m: 1 set
• Etui for storing wires: 1 piece

Applications

• ✅ For passenger cars
• ✅ For delivery vans
• ✅ For minibuses
• ✅ For emergency starting of vehicles with a dead battery
• ✅ For use in garages and parking lots
• ✅ For vehicle equipment on long trips
• ✅ For assistance with starting problems in winter
• ✅ For private and workshop use

🚗 Practical equipment for every car

The jumper cables take up little space and can be stored in the trunk all year round. This is a simple equipment that can be very useful during an unexpected battery failure.

🧳 Case included

The set comes with a practical case that makes it easy to store the wires in the trunk. This keeps the wires and clamps organized and does not move loose while driving. The case also works well when moving the set between vehicles.

⚡ Thick wires 10 mm²

The 10 mm² cross-section allows for effective current conduction during emergency start-up. The thicker wire design is particularly important at higher loads and helps reduce energy loss between batteries. The 4 m length also provides convenience for setting up vehicles.

🗜 Sturdy clamps and comfortable handles

• ▶ Strong terminals ensure a secure connection to the battery poles during emergency start-up
• ▶ Solid pressure helps maintain stable contact even when clamps are placed at a less comfortable angle
• ▶ Isolated handles increase the safety of use and reduce the risk of accidental hand contact with metal elements
• ▶ Convenient shape of handles makes it easy to put on and take off the clamps from the battery
• ▶ Durable construction works well with regular use in the car, garage and workshop

🔧 How to prepare for the use of jumper cables

1. Set both vehicles close together so that the wires reach freely into the batteries, but the cars do not come into contact with each other
2. Turn off the engines of both vehicles before connecting the wires
3. Turn off electrical receivers such as lights, radio, air supply or window heating
4. Check the battery pole markings and make sure where the positive + and negative poles are located -
5. Connect the red wire to the positive pole of the discharged battery
6. The other end of the red wire connect to the positive pole of the working battery
7. Connect the black wire to the negative pole of the working battery
8. Connect the other end of the black wire to a stable metal mass point in a vehicle with a discharged battery
9. Start the vehicle with a working battery, then try to start the vehicle with a discharged battery
10. When started, disconnect the wires in reverse order than when connecting

Specifications