Automobilio užvedimo laidai ULFUR, 800A, 4 m, stori

Trumpai apie prekę

Prekė: Automobilio užvedimo laidai ULFUR, 800A, 4 m, stori. Kategorija: Užvedimo laidai.

• Gamintojas: no brand
• Ilgis: 4 m

ULFUR Starting Cables 800A / 2x4m / 20mm2

ULFUR starter cables are robust and reliable cables designed for emergency starting of vehicles with a discharged battery. With their high current efficiency and high-section copper wires, they ensure safe and efficient starting even in harsh weather conditions.

✨ Maximum intensity: 800A

✨ Length: 400cm

✨ Cross-section: 20mm2

Cat. no.: UF15101

The most important advantages of the product:

🔥 High current - up to 800A: Allows for efficient start-up of most vehicles, even at low temperatures.

🔥 They do not tangle - the wires are connected to each other, which prevents the cables from tangling

🔥 Robust rubber insulation: Resistant to mechanical damage, moisture and low temperatures.

🔥 Copper coated clamps: Guarantee a secure grip, minimize sparks and protect against corrosion.

🔥 Length 4 meters: Makes it easier to connect vehicles even when they are not standing directly next to each other.

🔥 Practical case included: Facilitates storage, transport and protects cables from dirt.

Application:

🛡 Passenger cars.

🛡 Vans and trucks.

🛡 Agricultural and construction machinery.

🛡 Emergency situations on the road.

🛡 Private and professional use.

How to use – step by step:

1. ✅Make sure both vehicles are turned off.
2. ✅Connect the red terminal to the positive pole (+) of the working battery.
3. ✅Connect the second red terminal to the positive pole (+) of the discharged battery.
4. ✅Connect the black terminal to the negative pole (–) of the working battery.
5. ✅Connect the second black terminal to the negative pole of the vehicle with a discharged battery.
6. ✅Start the vehicle with a charged battery, then try to start the second vehicle.
7. ✅After starting, disconnect the cables in reverse order.

Precautions:

⚡Check the voltage of the batteries – the cables are designed for vehicles with the same installation voltage (e.g. 12 V).

⚡Do not allow terminals to come into contact during connection and operation - this threatens short circuit and spark.

⚡Turn off all receivers in the car throw in the clearance, pull manually and start the engine.

⚡Always keep the correct order of connecting the wires (plus to plus, minus to minus) to avoid damage to the electrical system.

⚡Avoid sparking near the battery, as this can lead to the ignition of gases emitted during battery operation.

⚡Do not use wires near fuels, gases or open fire.

⚡When the start-up is complete, disconnect the wires in reverse order, with caution.

⚡If acid leaks from the battery and gets on the skin or eyes, rinse immediately with plenty of water and consult a doctor.

Specifications