Baseino valymo robotas Aiper Scuba N1, belaidis, baltas

Trumpai apie prekę

Prekė: Baseino valymo robotas Aiper Scuba N1, belaidis, baltas. Kategorija: Dulkių siurbliai.

• Gamintojas: AIPER
• Modelis: N1
• Galia: 900 W

Enjoy clean water without the hassle! The Aiper Scuba N1 automatically cleans the floor, walls, and waterline of your pool (up to 150 m², depth up to 3 m). Its track drive and WavePathTM 2.0 algorithm ensure efficient coverage of the entire surface. With its rechargeable battery, the robot runs for up to 150 minutes and the battery charges in 3–4 hours. Dive into a crystal clear pool every summer afternoon!

4 modes of operation

The Scuba N1 wireless robot allows you to work in one of four available modes:

• AUTO (walls, water line, bottom),
• FLOOR ONLY (bottom only),
• WALL ONLY (walls and water line only),
• ECO (periodic bottom cleaning).

Press the button on the robot or use the application for mobile devices to choose the optimal mode of operation of the robot and enjoy a clean pool

No more dirty walls!

Scuba N1 stands out from the competition thanks to its track tread. It provides better grip compared to pool cleaning robots whose suspension system is based on wheels.

Thanks to this, the robot is able to thoroughly clean the pool walls and water line on its own. Scuba N1 can move even on walls inclined even at an angle of up to 105 °.

Unmatched mobility

Thanks to the tracked suspension system, the stab robot moves rapidly on the bottom of the pool and on its walls. It moves from edge to edge, and the track tread provides better grip on the ground.

Thanks to this, the robot is able to overcome obstacles located on the bottom and walls of the pool and effectively clean the surface.

Powerful suction power

Equipped with three motors - two drive and one pump, the Scuba N1 generates powerful suction power allowing filtration of 265 liters of water per minute, effectively removing leaves, sand, algae and other impurities.

Large, 3,5 l filter container with double filtration eliminates even the smallest particles, ensuring crystal clear water throughout the season.

Intelligent Navigation

WavePath™ Navigation 2.0 is a unique navigation technology Aiper. It uses acceleration sensors, inertial sensors and robot algorithms to operate efficiently.

The robot moves systematically, selecting the path of work to the surface. It moves on the walls in the shape of the letter N, while on the bottom of the pool it rides from edge to edge in the shape of the letter S. In this way, the robot cleans every part of the walls and bottom of the pool without skipping the surface, thus ensuring comprehensive cleanliness of the walls and bottom of the pool.

Ideal for Pools up to 150 m²

Scuba N1 is the perfect solution for pools up to 150 m². Its advanced navigation technology allows for efficient cleaning of all shapes of pools, both rectangular and irregularly shaped.

⚙ Technical specification:

• Type of pool: dug in, recessed in the ground
• Cleaning area: bottom/walls/water line/stairs
• Swimming pool size: up to 150 m²
• App for mobile devices: Yes
• Engines: 2x drive + 1x suction pump
• Cleaning type: suction + scrubbing
• Suction force (l/min): 265
• Filter quality: Dual system (180 µm + 3 µm)
• Basket capacity: 3,5 l
• Working time: 180 minutes
• Charging time: 4 hours
• Working modes: Walls, Bottom, Auto, Eco
• IP rating: IPX8 (full waterproof)
• Maximum water depth: 3 m
• Robot weight: 7,9 kg
• Robot dimensions: length 44,5 cm/ width 39 cm/ height 23,5 cm
• Dimensions of commercial packaging: length: 52,8 cm/ width 44,2 cm/ height 30,8 cm
• Dimensions of transport packaging: length 54,4 cm/ width 45,8 cm/33 cm

Set Contents:

• 1x Aiper Scuba N1 Pool Cleaning Robot
• 1x AC charger
• 1x pull-out hook
• 2x additional PVC brushes
• 1x instruction manual

FAQ - Frequently Asked Questions:

• What types and constructions of pools is this robot suitable for? Are there any pools that this robot is not suitable for?

The robot is suitable for pools made of concrete, fiberglass, vinyl, mosaic tiles and other materials, but can not be used in rack, expansion and inflatable pools.

• Does the robot also clean the stairs in the pool?

The robot is able to climb stairs, but cannot clean them.

• Why does the robot turn off automatically when you turn it on?

When turned on, the robot starts the pump every 10 seconds to detect the presence of water. This process is repeated 6 times. If water is not detected during this process, the robot will shut down automatically.

• How to use the Eco cleaning function?

1) When the robot is turned on, press the power button briefly to select Eco cleaning mode, then immerse the robot in water. The robot will automatically carry out a cleaning cycle of 45 minutes every 24-48 hours, performing a total of three cleaning sessions.

2) The robot can stay immersed in the pool throughout the process. It is not necessary to remove it from the water before completing three cleaning cycles in Eco mode.

3) If the robot is removed from the pool while it is in standby mode and any operation button is pressed, the robot will automatically leave Eco cleaning mode.

• Do I need to use a replaceable MicroMesh™ ultra-fine filter?

The MicroMesh™ replacement ultra-fine filter (exact) can retain particles of 3-10 um, such as silt or some algae. When visible contaminants are minimal (e.g. sand, hair), and the water is cloudy or algae appear in it, it is recommended to use both a filter basket and a replaceable ultra-fine (exact) MicroMesh™ filter. If there are many large, visible impurities in the water, it is recommended to use only the filter basket.

• How should I clean and maintain my MicroMesh™ replacement ultra-fine (exact) filter and how often should I replace it?

1) After each pool cleaning, immediately clean the MicroMesh™ replaceable ultra-fine (exact) filter with running water under high pressure, not manually, using a brush.

2) After cleaning, the MicroMesh™ replacement ultra-fine (exact) filter should be dried and stored away from direct sunlight.

3) After several uses, traces of use may appear on the surface of the MicroMesh™ replaceable ultra-fine (exact) filter that do not affect its performance.

4) Replaceable ultra-fine filter (accurate) is a consumable and should be replaced every 30 uses to maintain effective operation and optimal robot performance.

Specifications