Belaidė profesionali nagų freza, 18000 RPM

Trumpai apie prekę

Prekė: Belaidė profesionali nagų freza, 18000 RPM. Kategorija: Nagų frezos.

• Gamintojas: no brand
• Modelis: 4896022072233
• Galia: 2 W
• Įtampa: 5 V
• Spalva: pink

Modern, wireless nail milling machine QSKY with a powerful motor, speed control up to 18000 rpm /min and ergonomic, lightweight handle provides quiet, precise and safe nail development. Ideal for home and professional use – with 6 cutters, brush and USB-C charging.

Main features of the producti

✅ Professional, powerful motor for quick material removal

✅ Very quiet operation and low vibration

✅ Speed control up to 18000 RPM

✅ front/rear rotation (F/R)

✅ Lightweight and ergonomic "pen" design

✅ Wireless operation – 500 mAh battery

✅ Charging USB-C (DC 5V)

✅ Set of 6 diamond/ceramic cutters

✅ Cleaning brush included

Advantages of the product

✅ Allows quick removal of hybrids, gel and acrylic

✅ Ideal for beginners – safe, stable work

✅ Low vibration – does not tire your hands even with a longer manicure

✅ F/R rotation for right- and left-handed people

✅ Compact – fits in a cosmetic bag and purse

✅ Can also work while charging

Benefits for You

⭐ Convenient manicure and pedicure without a salon visit

⭐ Precise work without overheating the nail plate

⭐ Lightweight, handy design allows for longer work without fatigue

⭐ Suitable for both beginners and professionals

⭐ 6 bits allow you to adapt your work to any needs

Why Our Product?

⭐ Very quiet, stable operation thanks to a new generation motor

⭐ Powerful 500 mAh battery + fast USB-C charging

⭐ Full set of accessories – bits, brush, cable

⭐ Ergonomic handle fits perfectly in your hand

⭐ Safe working technique at a 45° angle

Technical specification

✔ Model: M3

✔ Speed maximum: 18000 rpm. /min

✔ Voltage input: DC 5V

✔ Battery: 500 mAh

✔ Type charging: USB-C

✔ Dimensions of the device: approx. 13 × 2,3 × 2,3 cm

✔ Material: ABS + metal

✔ Rotation: front / rear

✔ Set of cutters: 6 pcs. (diamond/ceramic)

✔ Color: pink

Instructions for use

1 Select the cutter and place it in the holder.

2 Turn on the device and set the speed.

3 Apply the cutter at an angle of 45° to the plate.

4 Do not press – let the cutter do the work.

5 Change the front/rear rotation according to your needs.

6 When finished, clean the cutters and the device with a brush.

⭐ Installation and replacement of cutters

1. End for milling machine

2 /5. Turning the milling machine on/off

3 / 7. Display with uspeed setting (L/M/H) - low, medium, high (low, medium, fast)

The display shows the speed modes and how to change them. The photo shows how the user can adjust the power of the device to the current work.

4. Charging port

6. Change of turnover to the right/left

⭐ How to replace cutters?

1 Catch the milling machine at the head

Keep the device right at the tip — where the incisions are.

2 Grab the mounted cutter with your fingers

Hold the cutter with two fingers (as pictured) at the red ring.

3 Turn the cutter gently to the left and pull out

A slight rotational motion will help loosen the mount.

Then slide the cutter straight up.

4 Insert new cutter

Insert the tip into the hole, holding it straight.

5 Turn right to stabilize it

Slightly twist the cutter and press until you feel it sits securely.

6 Check stability

Before turning on the device, make sure that the cutter is inserted to the end and does not move sideways.

Application

⭐ Removal of gel and acrylic

⭐ Removing skins

⭐ Scraping and shaping nails

⭐ Tarnish tiles

⭐ Alignment and polish

How to clean?

✅ Clean the cutters with a brush after each use

✅ Disinfect cutters with alcohol

✅ Store in a dry, cool place

✅ Avoid contact with water

✅ Clean the handle with a dry cloth

The set includes:

✅Milling machine

✅Handle for milling machine

✅ USB-C cable

✅Brush

✅Professional drill bit set x 6 pieces

✅Instruction manual in Polish

⭐ Docking station

Milling machine can be:

• loaded standing,
• stored in the database,
• along with cutters that have their places in the stand.

⭐ Charging via USB-C port

USB-C port located on the bottom of the milling machine. This is information that the device can also be charged wired — e.g. from a charger, powerbank or laptop.

⭐ Control panel and display

• switch-on button,
• button to change the direction of rotation,
• speed indicator L/M/H.

Specifications