Belaidis elektrinis siurbtukas plytelėms FUGERT, LCD ekranas, iki 260 kg

Trumpai apie prekę

Prekė: Belaidis elektrinis siurbtukas plytelėms FUGERT, LCD ekranas, iki 260 kg. Kategorija: Plytelėms skirtos siurbtukai.

• Gamintojas: FUGERT
• Modelis: FUG-0264

FUGERT FUG-0264 — new generation cordless suction cup

260 kg lifting capacity. USB-C charging. More than 8 hours of operation.

✔ Suction surface 245 × 165 mm — much larger than standard plates ⌀200 mm

✔ You can charge it anywhere: from a powerbank, phone charger, even in the car

✔ Easy-to-read LCD screen: current lifting capacity, battery level and operating mode

✔ Automatic pumping – the grip takes care of itself

SUCTION SURFACE 245 × 165 MM

Where does the suction cup lift really come from?

It is an advanced suction diaphragm pump with a power exceeding 74kPa.

Simple physics: lifting capacity = suction surface × vacuum. It cannot be "described" marketingly - it is decided by the rubber that actually comes into contact with the material.

Fugert has an oval suction surface of 245 × 165 mm (approx. 340 cm²)

USB-C CHARGING: EVEN IN THE CAR

The only right standard: USB-C

You charge this suction cup with a universal USB-C cable – the same as your phone. This means that the power source is:

✔ charger from the phone

✔ powerbank — top-up during a break at the construction site

✔ USB port in the car — the suction cup charges when you go to work

✔ laptop, workstation, extension cable with USBNO MORE dedicated chargers!

Charging time: approx. 2 h from zero to full.

💡 It is worth knowing: tools with a dedicated 230 V charger have one weakness – when the charger stays in the workshop, breaks down or dies, the device becomes useless until the original is purchased. With the USB-C standard, this problem does not exist: a matching cable is in almost every home or car.

THE BUILT-IN BATTERY IS THE PERFECT BALANCE

Center of gravity where your hand

The battery is built centrally into the body, in the middle of the handle. You can feel the effect from the first lift: the device does not "escape" in any direction, and the weight of the plate passes straight through the axis of the hand. The 110 mm long grip made of non-slip plastic fits securely in the hand - also in the work glove.

MORE THAN 8 HOURS OF OPERATION ON A SINGLE CHARGE

One battery that lasts for a full day

FUGERT works more than 8 hours on a single charge – a full day on the construction site without interruption to battery changes. And when you take a coffee break, you'll recharge it from the powerbank.

Electronics supervises the Li-Ion cell: you control the charge level on an ongoing basis on the LCD screen in five ranges (0 – 20 – 40 – 60 – 80 – 100%).

LCD SCREEN: FULL CONTROL, NOT JUST A CONTROL

You see exactly what holds your record

This LCD screen in shows simultaneously:

✔ current lifting capacity (vacuum) — you know how much the suction cup will actually hold at the moment

✔ battery level in 5 ranges — no guessing how much work is left

✔ color mode indicator

🟢green: pumping 🔴red:pumping

AUTOMATIC PUMPING

Why do suction cups "let go"? Micro-leakage.

Even on a seemingly smooth tile, there are micropores and dust particles. Because of them, the vacuum always slowly drops — this is a natural physical phenomenon, not a defect. The difference is what happens next:

✔ FUGERT detects the vacuum drop itself and immediately replenishes it

✔ The system works whenever the device is turned on – without your intervention

✔ The function is invaluable for longer portability and large formats

💡 Automatic pumping activates when dropped to about 214kg

ONE-BUTTON OPERATION: ONLY 4 STEPS

Simpler operation = fewer errors

1 Hold — the device turns on

2 Press briefly — automatic pumping starts, suction cup grips

3 Move the element — you control the parameters on the LCD

4 Press quickly 2× — pressure drops to zero, suction cup lets go

💡No valves, no manual pumping, no combination. Logic you’ll learn in 30 seconds—and not forget with gloves on the scaffolding.

SAFETY: MANUAL VACUUM RELEASE

Double control over grip

In addition to releasing with the FUGERT button, it has a mechanical vacuum release language – pulling it up lets air in and immediately disconnects the suction cup from the surface. Regardless of electronics and battery status.

✔ full control even after turning off the device (vacuum is maintained)

✔ safe detachment without tugging – never tear off the suction cup with force, it destroys the rubber of any manufacturer

✔ release the grip only after putting down and stabilizing the element

3 FILTERS INCLUDED: PROTECTION OF THE PUMP AGAINST DUST

Construction is dust. The pump doesn't like it.

Dust from stoneware cutting are the biggest enemies of the vacuum pump – sucked into the cylinder accelerates wear and causes leaks. That's why this suction cup works with a filter to protect the suction system, and you get two spare filters included - it takes a while to replace and does not turn off the tool from work.

✔ longer pump life and stable vacuum

✔ spare filter immediately in the case – without hunting for parts

✔ simple maintenance: after work, wipe the rubber, check the edges, replace the filter when needed

APPLICATIONS: FROM STONEWARE TO GLASS

For lifting, moving, positioning and precise assembly:

✔ large format stoneware — laying wall and floor coverings

✔ ceramic tiles and glaze – accurate positioning during installation

✔ glass and panes of glass — windows, shower cabins, balustrades

✔ stone slabs — marble, granite with a smooth surface

✔ furniture boards, laminated boards and countertops with a smooth surface

💡The condition of a good grip is a clean, dry, smooth and non-porous surface. More about this in the next module – honestly.

HONESTLY: WHEN THE SUCTION CUP DOES NOT WORK

We write directly because you work with heavy plates

No vacuum suction cup (even FUGERT) will provide a secure grip on the surface:

✖ rough, porous or cracked

✖ soiled with dust, grease or glue residues

✖ wet or moist

✖ with unstable, loose, thin and susceptible to deformation elements

💡Before each lift, check the purity of the rubber and its edges and look at the LCD to see if the vacuum is stable.

SET IN CASE + WARRANTY

You take it out and work — all included

In a dedicated transport case you will find:

✔ FUGERT cordless suction cup

✔ case protecting against dust, moisture and damage in transport

✔ USB-C charging cable

✔ 2 additional suction system filters

✔ Polish manual with full safety and maintenance rules

TECHNICAL DATA

Brand: FUGERT

Model: FUG-0264

Maximum lifting capacity: 260 kg

Suction surface: ~340 cm²

Voltage: 3,7 V

Battery:Built-in: Li-Ion 2,0 Ah

Charging: USB-C

Handle length: 110 mm

Display: LCD: lifting capacity, battery, operating mode

Automatic pumping: yes

Manual vacuum release: yes

Suction cup dimensions: 245 × 165 × 90mm

Weight: 1160g

FREQUENTLY ASKED QUESTIONS (Q&A)

Can I charge the suction cup in the car? Yes. All you need is a USB port in your car or a USB car charger – the suction cup charges with a standard USB-C cable (included). Full charge takes ok. 2 h.

Is one battery enough for a full day of work? Yes — the working time is more than 8 hours on a single charge. You can also recharge the device from the powerbank at any time, e.g. during the break.

What happens when the battery discharges during the transfer? The vacuum produced is maintained after turning off the device until it naturally drops or manually releases. Still, always check the battery level on the LCD before work – with a low charge, the device may not maintain the proper vacuum when pumping up.

Will the suction cup hold the plate on a rough or wet surface? No — and this applies to every vacuum suction cup. The surface must be clean, dry, smooth and non-porous. On porous, cracked or damp surfaces, an effective vacuum cannot be produced.

What is the difference between a built-in battery and an attached one? The centrally built-in battery does not change the center of gravity – the device is perfectly balanced in the hand. You also don’t have to buy, charge and keep an eye on separate batteries or charger.

Can I work while charging? We do not recommend using the product while charging. Charge the device before use.

What materials is the suction cup suitable for? Gres (also large format), ceramic tiles, glass, stone slabs, laminated, countertops with a smooth surface, furniture elements. Do not use on objects that are unstable, loose, thin, prone to deformation or heavier than 260 kg.

How to care for a suction cup? After work, clean the rubber and edges from dust and glue residue, store in a suitcase in a dry place. Use mild means to clean. The set includes 2 filters to protect the pump - control their condition. Perform maintenance after disconnecting the battery from the device.

Is the device intended for outdoor use? According to the instructions, the device is intended for indoor use. Protect them from water, moisture and temperatures above 45°C.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	FUGERT
Parametry	Product weight with unit packaging	1.87 kg
Parametry	Manufacturer code	FUG-0264
Parametry	EAN (GTIN)	5906688634368
Parametry	Packaging status	original
Parametry	Device weight	1.16 kg
Parametry	Certificates of conformity	CE
Parametry	Batteries included	yes
Parametry	Series	Przyssawka próżniowa elektryczna
Parametry	Lifting capacity	260 kg