Belaidis smūginis gręžtuvas 160 Nm PRO

Trumpai apie prekę

Prekė: Belaidis smūginis gręžtuvas 160 Nm PRO. Kategorija: Akumuliatoriniai suktuvai-gręžtuvai.

• Gamintojas: Wuber
• Modelis: W04524

✅ LONG OPERATION WITHOUT FAILURE ► BRUSHLESS MOTOR

✅ SCREW IN THICK SCREWS EFFORTLESSLY ► 160 NM

✅ QUICKLY DRILL THROUGH A HARD WALL ► STROKE 22500 BPM

✅ YOU WILL CHOOSE THE PERFECT FORCE ► CLUTCH 20+1+1

✅ SECURE GRIP WHEN DRILLING ► ADDITIONAL HANDLE

✅ YOU WILL NOT SCREW ► AUTO STOP SYSTEM

✅ HOLDS THICK DRILL BITS FIRMLY ► 13MM SDS HANDLE

✅ USE YOUR SHARE+ SYSTEM ► BATTERIES SOLO VERSION (WITHOUT BATTERY)

⭐ RAW POWER, FULL CONTROL. A TOOL FOR TASKS WHERE OTHERS FAIL

✅ Rotation speed up to 1700 rpm /min ► Instantly drill through steel profiles and hard wood.

✅ 160 Nm of torque ► You screw in massive carpentry screws without drilling.

✅ Stroke frequency 22500 thighs. /min ► You effectively crush the concrete structure, saving time and avoiding overheating of the drill.

⚡ STRONG AND RELIABLE SCREWDRIVER

✅ Brushless motor ► A durable and proven electric unit is responsible for the high power of the device. You eliminate the problem of brush wear and sparks.

✅ 3 operating modes (Drilling / Screwing / Stroke) ► You have one tool for mounting delicate hinges, drilling in metal and anchoring in masonry.

✅ 2 operating modes ► I gear is the rotation range 0-500 RPM, II gear is the rotation range 0-1700 RPM.

✅ Additional handle included ► A key element for a tool with a torque of 160 Nm. It gives you a firm, ambidextrous grip and full stability when drilling with impact in hard materials.

✅ Auto stop ►Prevents the tool from twisting out of the hand if the hardware is locked in the material.

✅ Built-in brake ► the device is equipped with a brake that stops the engine immediately after releasing the screwdriver trigger.

⭐ CONVENIENT AND PRACTICAL

✅ Share+ System 20V ► You plug the battery in from the grinder or jigsaw Wuber. You only pay for the tool itself, reducing the cost of garage equipment.

✅ Battery indicator ► You plan to work in advance and avoid charging interruptions at the least appropriate time.

✅ Soft Grip ► non-slip handle fits securely in your hand while working.

✅ LED lighting ► You can see the drilling point precisely in dark places.

✅ Reinforced composite housing with metal nose ► Equipment resistant to falls and difficult repair conditions.

✅ Metal drill chuck 13 mm ► You get a secure and rigid grip on the drill.

⚙ TECHNICAL SPECIFICATION:

Model: W04524

Power supply voltage: 20V

Engine Type: Brushless

Maximum torque: 160 Nm

Rotary speed (Run 1 / Gear 2): 0-500 / 0-1700 rpm. /min

Frequency of stroke (Run 1 / Run 2): 0-500 / 0-22500 thighs. /min

Chuck holder: 13 mm

Clutch adjustment: 20+1 (drilling) +1 (stroke)

Security: Auto Stop System

Weight of the device: 1.9 kg

❗❗ No battery and charger included

⭐ WHY CHOOSE A SCREWDRIVER WITH BRUSHLESS MOTOR?

► Increased energy efficiency

• ✔ Consumes less electricity from the battery, which allows for much longer operation on a single charge.

► No need to replace brushes

• ✔ Completely eliminate the problem of sparks and wear of elements. You save time and money on service costs.

► Higher durability under load

• ✔ The motor heats up to a much lesser extent, which makes the equipment highly resistant to heavier tasks.

► Quieter and smoother operation

• ✔ You work in greater comfort; the lack of mechanical friction makes it easier to focus on the precise task at hand.

✅ Brushless technology is an investment in modernity that will simply make your work easier.

⚡ ONE EQUIPMENT - THREE APPLICATIONS

The equipment from the PRO line is designed to handle any task.

The device offers 3 modes of operation, which eliminate the need to juggle multiple tools.

► Screwing / Unscrewing

• ✔ Quick assembly of the structure and secure twisting without damaging the threads – you finish the work efficiently, cleanly and without corrections.

► Drilling

• ✔ When you need to break through thick steel or hard oak – the equipment works stably, maintaining the perfect precision of the drill.

► Drilling with stroke (22 500 strokes/min)

• ✔ When you hit a hard wall or concrete screed - the impact mechanically breaks down the structure of the material. You don’t stand still, you don’t burn drills, you just move forward.

✅ You change the mode with one turn of the ring and adjust the machine to every task that awaits it.

⭐ YOU DON’T PUSH, YOU DON’T PRESS, YOU DON’T COMBINE – 160 Nm TAKES IT ON ITSELF

You get to know a really strong screwdriver not by the loud motor or empty revolutions, but by how it behaves when the material begins to put up real resistance.

❌ With weaker models, tugging quickly appears, and you have to support the device with your own strength, denying and pressing it firmly.

✅ This is where the problem disappears. The powerful 160 Nm of torque does all the hard work for you.

• The screwdriver enters the material firmly and smoothly. You completely forget about the need to press the tool - you just hold it stable, and the work becomes fully predictable, comfortable and effortless.

⚡ WITH STROKE YOU ACT FASTER

Simply drilling into hard materials is a physical struggle. The drill stands, you press the device with all your strength, and you still waste time, because the rotational movement itself can not cope with e.g. thick brick.

Stroke completely changes the physics of work.

• Instead of pushing the drill with all its force, the impact mechanism generates thousands of microstrokes (up to 22 500 thighs. /min), which physically break the material. The drill, which had just been blocked in the wall, begins to go smoothly and without stops.

Your benefits:

✔ Energy saving ► you do not press the machine with your whole body, the stroke crushes the material for you.

✔ Instant effects ► without any problem and you drill brick, cellular concrete or hard masonry much faster.

✔ Longer life of the fixture ► drill bits heat up less and are less likely to dull, because the material is broken down by impact, not just rubbed off.

⭐ HARDENED STEEL TRANSMISSION - FULL POWER TRANSFER WITHOUT LOSSES

Cheap, soft gears at the first major challenge quickly fail:

• ❌ wipe their teeth,

• ❌ catch loose,

• ❌ “ground” instead of working.

We focus on hardened steel. Our transmission does not bend under load and holds the original geometry of the teeth.

What does this mean in practice?

• ✔ 100% power to work ► torque from the engine goes into the workpiece, not into the wear of the mechanism.

• ✔ Overload resistance ► you safely drill with a stroke and unscrew the baked screws without the risk of twisting the drive.

• ✔ No costly repairs ► eliminates the problem of wiping modes and you get equipment ready for years of hard work.

⭐ BET ON PROVEN EQUIPMENT FROM THE RENOWNED BRAND WUBER ⭐

⚡ AUTO STOP SYSTEM

How does it work?

• A dedicated button on the panel at the base of the device activates the system (status is confirmed by a green LED).

• The electronic module constantly monitors the resistance on the spindle.

Function:

• When the system detects a sudden blockage of the drill in the material, it cuts off the motor power supply.

Your benefit:

• ✅ Because at a powerful torque of 160 Nm, a sudden lock on the spindle causes the entire tool to rotate, the Auto Stop system instantly cuts off the drive, protecting the wrists from twisting and preventing damage to the workpiece.

⚡ MECHANICAL CLUTCH 20+1+1

How does it work?

• The setting ring allows you to select the torque after which the clutch automatically disconnects the drive and stops the spindle.

Function:

• Low settings (1-5): Ideal for screwing short screws into soft materials (particleboard, pine). They guarantee that you will not twist the thread and destroy the structure of the wood.

• Medium settings (6-14): They are perfect for universal assembly work and medium-length screws.

• High settings (15-20): Designed for long screws and hardwood (oak). They provide a strong, even tightening of the elements.

Repeatability:

• ✅ Each screw will be mounted at the same depth, ensuring an aesthetic appearance and your satisfaction.

⚡ QUICK-CLAMP DRILL CHUCK

How does it work?

Operation with just one hand:

• Disassembly of accessories: To open the jaws, you grab the handle ring and set the left rotation on the device. A slight pull of the trigger causes the mechanism to automatically unfold.

• Assembly of the drill: After placing the fixture in the head, you switch to the right rotation. You hold the ring and start the screwdriver, and the jaws tighten.

Your benefit:

• ✅ Instant change of attachments without searching for keys.

⚡ SMOOTH SPEED CONTROL IN THE TRIGGER

How does it work?

• Gently pressing the trigger results in slow rotations. The harder you press, the faster the drill rotates.

Your benefit:

• You can drill hard material precisely (e.g. ceramic plate) at very slow speed, minimizing the risk of the drill slipping, and then smoothly increase the power to the maximum.

⭐ ENTER THE SHARE+ SYSTEM FAMILY

We present you another device from our growing family of power tools. This refined drill/driver is the foundation of your home workshop.

WHAT IS THE SHARE+ SYSTEM SERIES FOR YOU?

Wuber Share+ System is a dedicated line of tools driven by ONE universal type of battery.

Thanks to this, you buy one battery, and then you choose only the devices themselves. You keep money in your wallet and don’t clutter your workshop with dozens of different chargers!

⚡ BUILD YOUR OWN WORKSHOP WITH SHARE+SYSTEM

• ✔ If this is your first device in this series, buy a battery and charger on our other auctions at a promotional price.

• ✔ Building universal workshop equipment has never been so easy and cheap.

• ✔ Compared to standard batteries, you get up to 20% more power, 25% longer run time on a single charge and up to 50% faster charging.

⭐ HOUSING MADE OF DURABLE PLASTIC

Thanks to this, the components of the device are provided with adequate protection, which results in a very good service life, which is why the drill-driver will serve for many years.

✔ The ventilation holes used are responsible for correct cooling of the engine, so we do not have to worry about overheating or damage to the device.

⭐ Built-in LED placed under the spindle effectively illuminates the workplace, which facilitates precise drilling and screwing even in dimly lit or hard-to-reach places.

⚡ ERGONOMIC SHAPE AND COMPACT SIZE

Accordingly, the chosen center of gravity, combined with low self-weight and thought-out shape make working with the device comfortable, and longer sessions do not tire.

The rubber-coated tool housing ensures that the device sits firmly in your hand and does not slip out.

✅ CHOOSE THE EQUIPMENT THAT SOLVES YOUR PROBLEMS

• ✔ No more locking the screwdriver in hard wood. 160 Nm of torque ensures continuous operation without interruptions.

• ✔ No more damaged wrists. The Auto Stop system takes control when the situation becomes dangerous.

• ✔ No more buying separate chargers. Share+ System reduces clutter and power costs in your workshop.

✔ SET INCLUDES:

• Drill/driver Wuber W04524

• Auxiliary handle for drilling

• Metal hook for assembly belt

• Double-sided screwdriver and mounting screw

• User manual

• Original packaging

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Wuber
Parametry	Power supply	rechargeable battery
Parametry	Voltage (V)	20 V
Parametry	Motor type	brushless motor
Parametry	Battery capacity	0 Ah
Parametry	Hard torque	160 Nm
Parametry	Battery type	Li-Ion
Parametry	Maximum speed - 1st gear	500 RPM
Parametry	Maximum speed - 2nd gear	1700 RPM
Parametry	Device weight	1.9 kg
Parametry	Product weight with unit packaging	2.32 kg
Parametry	Manufacturer code	W04524
Parametry	EAN (GTIN)	5905873308244
Parametry	Series	W04524
Parametry	Batteries included	no
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE
Parametry	Number of batteries	brak akumulatora
Parametry	Additional information	backlit,torque adjustment,impact