Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: 3 eur
Aprašymas
Trumpai apie prekę
Prekė: Benzininės gyvatvorių žirklės su antivibracine rankena, tvirtos medžių šakoms. Kategorija: Žirklės ir genėtuvai.
- Gamintojas: Wuber
- Modelis: W27350 NOŻYCE DO ŻYWOPŁOTU SPALINOWE PIŁA 1KM
- Galia: 750 W
► 25.4 cm³ engine | ► 1.0 HP power | ► 60 cm cutting bar | ► Hardened steel blades | ► 3-position rotating handle | ► Vibration reduction system | ► Metal engine block | ► Diaphragm carburetor | ► Hand guard | ► Weight 6 kg | ► Fuel consumption 1 liter / hour
⛽ Two-stroke oil 500 ml FREE - prepare 12,5 liters of mixture
Scissors are delivered without fuel in the tank (for obvious reasons), so before the first start it is enough to refuel gasoline and mix it in a ratio of 25:1.
We add oil in the set - you do not have to buy anything or look for it in stores.
👉 We are always honest with you, so we will write directly - these are not scissors for everyone.
Ladies, this model is addressed to men. It is not the lightest (6 kg) and in our opinion you need a male hand to handle it.
Gentlemen - if you bet on these combustion shears, you will not come out of the admiration that power lies dormant in them. The engine weighs its weight, but if you are not afraid of such a replacement - a little more weight for incomparable, brutal power - we strongly encourage you. Work efficiency will reward.
PS Dear ladies, if you are looking for hedge trimmers, we have a very light electric model for you (W27330).
⚙ Technical specification
- Producer: WUBER
- Model: W27350
- Engine type: Combustion, two-stroke, single-cylinder
- Engine cooling: Air
- Engine capacity: 25,4 cm³
- Engine power: 0,75 kW / 1,0 HP
- Maximum idle speed: 3000 rpm
- Type of carburetor: Membrane
- Fuel: Lead-free gasoline, minimum 95 octanes
- Proportion of fuel mixture (petrol : oil): 25:1
- Fuel tank capacity: 500 ml
- Length of cutting strip: 60 cm
- Width of cutting strip: 9 cm
- Type of cutting strip: Double-sided
- Maximum cutting diameter: 2 cm
- Handle angle adjustment: Yes - 3 positions (90° left, straight, 90° right)
- Overall length: 110 cm
- Overall width: 23 cm
- Overall height: 21 cm
- Net weight: 6 kg
⭐ High motor power and cutting force
✅ Two-stroke engine 25,4 cm³ ► The achieved power from this capacity does not strain the engine, thanks to which it will repay trouble-free operation.
✅ Burning only 1 liter per hour ► Very low labor costs, and the included oil will last you for 12,5 hours of work.
✅ Power 0,75 kW / 1,0 hp ► Blades do not slow down in dense hedge.
✅ Cutting bar 60 cm ► The long strip collects a wide strip of twigs in one move, which allows you to deal with the entire hedge faster.
✅ Maximum cutting diameter 2 cm ► A typical hedge, thuja or boxwood branch is below this limit.
✅ Hardened steel blades ► Hardening increases the hardness of the cutting edge, so that the knives are durable and can be re-sharpened after blunting.
✅ Laser cut blade edges ► Each tooth on the strip has the same angle so that the cut is even.
⚡ Working comfort and safety
✅ Rotating handle in 3 positions ► You tilt it left or right and guide the shears on the side of the hedge without twisting your wrist and forearm pain.
✅ Vibration reduction system ► Less vibration reaches the hand from the working motor, which improves the comfort of work.
✅ Metal engine block ► Cast metal is characterized by reliability for years.
✅ Hand guard ► The cable in front of the front handle pulls sharp twigs away from the top of the hand.
✅ Trigger safety lock ► The blades start only after pressing the lock and gas trigger at the same time.
✅ Fuel pump in the start-up system ► The cold engine surprises at the first pull of the cable.
⭐ With WUBER combustion shears you will cut:
► Hedges
► Tuje and cypresses
► Bukszpan
► Spruces and other coniferous trees
► Shrubs and small branches of fruit trees
⚡ Membrane carburetor: the engine operates in any position
The diaphragm carburetor feeds fuel regardless of the angle at which you hold the tool.
The effect?
You turn the strip upside down when equating the bottom of the bush, and the engine holds the rotation without stuttering.
⭐ Internal combustion drive: independence from power sources
The fuel tank (500 ml) provides long mowing on a full tank. You are not looking for an outlet and do not interrupt the cut to recharge the battery.
What do you gain?
You walk around the plot without worrying about setting up extension cords.
⚡ Metal engine block
The engine block is a cast metal. When you take the shears in your hand, you will immediately notice that it is a piece of quality equipment - with power incomparable to weaker electric shears.
⭐ Double-sided cutting bar 60 cm
The teeth are arranged on both sides of the slat, and the two slats move opposite each other. This is the most effective way of moving the blade in hedge trimmers.
⚡ Rotating handle in three positions
The rear handle rotates 90° in left and in right, and its starting position is vertical. You choose the setting for which part of the hedge you are equalizing.
What do you gain?
The side of the hedge cuts just as freely as the top, and the hand and forearm stay in the natural setting.
⭐ Six kilograms that you hold in your hands
The shears weigh 6 kg and are guided with both hands, with their hands raised to the height of the upper edge of the hedge. It is equipment for men's hands and for men's strength.
This mass does not come out of nowhere - it is a metal engine block and a 60 cm strip, which are exactly those elements that give cutting power.
Weight is a proof of quality.
✔ Set includes:
► 1x Hedge Trimmer WUBER W27350
► 1x Slip-on cutting bar cover
► 1x Service Wrench Set
► 1x Scale container for fuel mixture preparation
► 1x Two stroke oil 500 ml
► 1x User manual in Polish
► 1x Manufacturer's packaging
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Product weight with unit packaging | 7.2 kg |
| Parametry | Power supply | combustion |
| Parametry | Brand | Wuber |
| Parametry | Maximum cut branch thickness | 20 mm |
| Parametry | Working length | 60 cm |
| Parametry | Engine displacement | 25.4 cm³ |
| Parametry | Power range | 1–1 KM |
| Parametry | Power | 750 W |
| Parametry | Tool weight | 6 kg |
| Parametry | Manufacturer code | W27350 NOŻYCE DO ŻYWOPŁOTU SPALINOWE PIŁA 1KM |
| Parametry | EAN (GTIN) | 5906436763258 |
| Parametry | Batteries included | no |
| Parametry | Packaging status | original |
| Parametry | Certificates of conformity | CE |
| Parametry | Cutting mechanism | standard |