Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: Pristatymas nemokamas
Aprašymas
Trumpai apie prekę
Prekė: Betono grąžtas 202 mm su stovu WABROTECH WT202. Kategorija: Grunto grąžtai.
- Gamintojas: WABROTECH
- Modelis: ZEST-202-SRWT45-2KOTW
- Svoris: 18.5 kg
DRILLING RIG WABROTECH WT202 WITH TILT TRIPOD WT45S
Drilling:
- External thread: 1 ¼”
- Internal thread: ½"
- Engine power: 2300
- Power supply: 230 V / 50
- Rotation speed: 1400 rpm.
- Drilled hole diameter range: 22 - 202 mm
- (for reinforced concrete and hard stone up to 168mm)
- Soft-start (slow start): YES
- Clutch: mechanical
- Additional protection: overload
- Maximum drill length: 45 cm
- Max. dimensions: 460 x 170 x 300 mm
- Weight: 6,50 kg
State:
- Incline: 45°
- Clamp:62
- Max. dimensions: 410 x 260 x 930 mm
- Base dimensions: mm
- Weight: 12,50 kg
Comfortable design and high power
The WT202 hand drill is a handy, convenient design, recommended for professionals in the construction and construction industry and all those who need a solid, reliable and above all ergonomic drilling device. Combined with the universal spindle and the power of 2300 W provided by an efficient engine, we have received one of the best drilling rigs in its price category, available on the market today!
Integrated connection
The WT202 has a robust gearbox. Adjusting the speed of rotation in the switch improves the comfort of work during work "from the hand".
The mechanical clutch in the device protects the engine and transmission from the adverse effects of overloads. In addition, an overcurrent circuit breaker is also used, which controls the shutdown of the device with excessive voltage surge.
Integrated connection to the water supply network allows wet drilling, which significantly increases the service life of most drills
Our core drill uses a mechanical clutch that protects the transmission and engine from damage. However, if the crown drill is jammed in the workpiece material during manual drilling, the machine may rotate rapidly, which may pose a potential hazard to the operator. Therefore, where possible, we recommend using the stand for drilling rigs, whose task is to increase the stability of the device, minimizing the risk of uncontrolled rotation and increasing the overall level of work safety.
High-quality machine bearings guarantee stable operation, which translates into increased drill life.
The spindle with 1/2” and 1 1/4” threads makes our drilling rig support virtually all drills and accessories available on the market.
The device has a protective PRCD residual current circuit breaker – crucial when drilling wet holes.
Our core drill uses a mechanical clutch that protects the transmission and engine from damage. However, if the crown drill is jammed in the workpiece material during manual drilling, the machine may rotate rapidly, which may pose a potential hazard to the operator. Therefore, where possible, we recommend using the stand for drilling rigs, whose task is to increase the stability of the device, minimizing the risk of uncontrolled rotation and increasing the overall level of work safety.
The presented model has a base designed so that the drilling angle can be adjusted in the 45° range.
The feed lever can be mounted on both the left and right sides of the tripod.
The stand base is equipped with four stabilizing screws, allowing you to position the tripod on an uneven plane.
Video of our WT202 drilling rig on a WT45S inclined tripod:
- https://www.youtube.com/watch?v=Zr8CC7Hzzjg
Included:
- 1x Drilling Rig WT202
- 1x WT45S Inclined Tripod
- 1x Clamp 62 mm
- 1x Anchor Kit
- 1x Cooling Water Hose
- 1x Feed Lever
- 1x Side handle
- 1x Motor holder
- 4x Stabilizing Screws
- 1x Set of brushes
- 1x Instructions
- 1x Transport wheels
- 1 x Carrying case (free)
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | WABROTECH |
| Parametry | Series | WT202+WT45S |
| Parametry | Power supply | electrical |
| Parametry | Engine power (kW) | 2.3 |
| Parametry | Drill length | 45 cm |
| Parametry | Weight | 18.5 kg |
| Parametry | Manufacturer code | ZEST-202-SRWT45-2KOTW |
| Parametry | EAN (GTIN) | 5904305451800 |
| Parametry | Product weight with unit packaging | 23 kg |
| Parametry | Purpose | for concrete |
| Parametry | Number of gears | none |
| Parametry | Maximum number of revolutions | 1400 rpm |
| Parametry | Maximum drilling diameter | 200 mm |
| Parametry | Packaging status | original |
| Parametry | Batteries included | no |