Betonui skirta deimantinė gręžimo staklių trikojo WT45S stovas, tinka fi112 mm karūnai

Trumpai apie prekę

Prekė: Betonui skirta deimantinė gręžimo staklių trikojo WT45S stovas, tinka fi112 mm karūnai. Kategorija: Grunto grąžtai.

• Gamintojas: WABROTECH
• Modelis: Wiertnica do betonu na statywie
• Svoris: 16 kg

DRILLING RIG WABROTECH WT112 WITH TILT TRIPOD WT45S

Drilling:

• External thread: 1 ¼” UNC
• Internal thread: ½”
• Engine power: 1500 Watt
• Power supply: 230 V / 50 Hz
• Rotation speed:
• 1 Run: 0 – 880 rpm.
• 2 Gear: 0 – 1990 rpm.
• 3 Gear: 0 – 3960 rpm.
• Soft-start (slow start): YES
• Drilled hole diameter range: 8 mm – 112 mm
• (for reinforced concrete and hard stone up to 82mm)
• Maximum drill length: 450 mm
• Max. dimensions: 270 x 170 x 510 mm
• Weight: 7 kg

State:

• Incline: 45°
• Clamp: 60 mm
• Max. dimensions: 410 x 260 x 930 mm
• Base dimensions: 300 x 235 mm
• Weight: 12,50 kg

CE declaration of conformity - our products meet the requirements of European Union directives

Professional drilling rig WT112 by WABROTECH is a practical model recommended for drilling in hard construction materials. Robust construction made mostly of steel and aluminum castings and versatility makes the device suitable for applications throughout the construction industry, and materials such as natural stone, asphalt, reinforced concrete or brick are not a challenge when drilling.

The drilling rig has a powerful 1500 W motor.

WT112 has a gearbox with a 3-speed transmission, which will allow you to better choose the drilling speed depending on the diameter of the hole and the material. Choosing the right speed of rotation facilitates drilling with different drill diameters, improves the comfort of work. Properly selected rotation speed also reduces the wear of the drill.

This model is recommended primarily for users who want to drill "hands-on" smaller hole diameters, and sometimes larger with a tripod.

The mechanical clutch in the device protects the engine and transmission from the adverse effects of overloads. In addition, a overcurrent switch was also used, which controls the shutdown of the device with excessive voltage surge.

Integrated connection to the water supply network allows wet drilling, which significantly increases the service life of most drills

High-quality machine bearings guarantee stable operation, which translates into increased drill life.

The spindle with ½” and 1 ¼” threads makes our drilling rig support virtually all drills and accessories available on the market.

The device has a protective PRCD residual current circuit breaker – crucial when drilling wet holes.

Our core drill uses a mechanical clutch that protects the transmission and engine from damage. However, if the crown drill is jammed in the workpiece material during manual drilling, the machine may rotate rapidly, which may pose a potential hazard to the operator. Therefore, where possible, we recommend using the stand for drilling rigs, whose task is to increase the stability of the device, minimizing the risk of uncontrolled rotation and increasing the overall level of work safety.

The presented model has a base designed so that the drilling angle can be adjusted in the 45° range.

The feed lever can be mounted on both the left and right sides of the tripod.

The stand base is equipped with four stabilizing screws, allowing you to position the tripod on an uneven plane.

Video from our WT112 drilling rig on a WT45S inclined tripod:

• https://www.youtube.com/watch?v=lJG-YmOyyrQ

Included:

• 1x Drilling Rig WT112
• 1x WT45S Inclined Tripod
• 1x Clamp 60 mm
• 1x Anchor Kit
• 1x Cooling Water Hose
• 1x Flat Wrench 30/32
• 1x Allen Wrench
• 1x Feed Lever
• 1x Side handle
• 4x Stabilizing Screws
• 1x Set of brushes
• 1x Instructions
• 1 x Carrying case (free)
• 1x Transport wheels

Specifications