Dažymo purkštuvas, hidrodinaminis, 220 bar, 1500 W, su prailgintuvu ir antgaliu

Trumpai apie prekę

Prekė: Dažymo purkštuvas, hidrodinaminis, 220 bar, 1500 W, su prailgintuvu ir antgaliu. Kategorija: Elektrinių įrankių rinkiniai.

• Gamintojas: no brand
• Modelis: KD1744

PAINT SPRAY GUN PISTON SPRAY PAINT GUN KD1744

• Brand: KRAFT&DELE
• Model: KD1744
• Capacity: Up to 1,5l/min
• Power source: universal motor 1500W
• Generator requirements: 8000W
• Maximum viscosity medium: 110DIN-s
• Maximum nozzle size: 0,019" (0,48mm)
• Maximum working pressure: 220 bar

RECIPROCATING PAINT AGGREGATE

Hydrodynamic paint sprayers are used to paint virtually all typical m.in building substrates. walls inside and outside residential and industrial buildings. They are suitable for the application of emulsion, acrylic, latex, water stains and varnishes and enamels.

Hydrodynamic painting involves compressing paint and spraying without using air on painted surfaces. Less paint consumption compared to roller or brush painting Painting large areas in one color e.g. apartments, garages, shops, steel structures, industrial halls, take four times less time than painting in the traditional way.

You can paint vertically and horizontally. The unit is mobile and convenient to use. Easy to clean and maintain.

If there is a break of several minutes during operation, lock the trigger of the gun and immerse the nozzle in a container with the appropriate solvent or water if it is water paint. This will prevent the paint from hardening. Remember to release the pressure in the aggregate.

Paint gun with spray tip

Lubricating oil TSL 250ml (for maintenance of upper seals for Painting Aggregates)

Nozzle for gun 515 (hole 0,015” - spray angle 50°, capacity approx. 0,87 l/min)

Extension for gun nozzle 50cm

The included gun works with a wide range of nozzles from various manufacturers available on the market.

Easy to clean and maintain

If there is a break of several minutes during operation, lock the trigger of the gun and immerse the nozzle in a container with the appropriate solvent or water if it is water paint. This will prevent the paint from hardening. Remember to release the pressure in the aggregate.

If the nozzle is clogged, it should be cleaned by turning it from the SPRAY painting position (arrow towards the gun outlet) 180 degrees to the CLEAN position (arrow in the opposite direction to the gun outlet). If such cleaning does not help, check the filter placed in the handle of the gun.

Composition of the set:

• Painting unit KD1744
• Suction hose with filter
• Flow hose
• Spray tip gun
• Extension 50cm
• Lubricating oil 250ml (for maintenance of upper seals for Painting Aggregates)
• Nozzle for gun 515
• Original packaging
• User manual

Specifications