Tikslus pristatymo terminas rodomas aukščiau ir apskaičiuojamas kiekvienai prekei individualiai. Pristatymas klientui nemokamas.
Aprašymas
Trumpai apie prekę
Prekė: Dirbtinė Kalėdų eglutė Diamond Pine, 220 cm, tamsiai žalia, tanki, aukštos kokybės. Kategorija: Dirbtinės kalėdinės eglutės.
- Gamintojas: MEMFLOW
- Modelis: CHOINKA SOSNA DIAMENTOWA 220CM PREMIUM
- Aukštis: 201 - 220 cm
- Spalva: green
On the green twig you can see well the red of the glass bauble, and a small pattern on the wooden pendant. Diamond pine MEMFLOW is 220 cm high. Its wider bottom and crown tapering towards the top create a classic Christmas tree silhouette. Between the floors there is a place where a longer ornament can hang freely.
Up close you can see how flat green needles propagate around the brown axis of the shoot. Each of the 1400 twigs can be arranged manually. Spread the adjacent shoots to fill the center of the crown, or leave a small gap where you want to hang a special ornament.
✅ Deep green highlights bright red and gold decorations.
✅ Flat, straight-cut PVC foil needles are arranged around the brown axis of the shoot.
✅ 1400 twigs for forming allows you to give the crown a full shape and arrange the pendants at different depths.
✅ The crown is up to 100 cm wide, so it is easy to measure the space for it by the window or next to the chest of drawers.
✅ Steel stand included supports the tree on four arms and leaves room for gifts under the branches.
✅ Modular design allows you to separate the Christmas tree into parts and hide it after the holidays.
You can start with the lights themselves, and then return to the same green Christmas tree every year with a different set of ornaments.
On a single shoot you can see the thin, brown axis, around which narrow strands of PVC film are laid. Single needles are flat and straight cut. The outline of the entire twig gradually narrows, until at the end it takes on a characteristic triangular shape.
The easiest way to see this detail is at eye level. When you leave some space with two adjacent twigs, each shoot will retain its own contour. Against the background of the brown axis and darker interior you can clearly see the arrangement of needles also between ornaments.
✅ Narrow strips of PVC propagate in different directions around the shoot, giving it volume.
✅ The visible axis emphasizes the direction in which the twig grows.
✅ Tapered shoots mark individual spitz on the outline of the tree.
✅ Ends at different angles diversify the shape of the crown viewed from the side.
✅ The exposed fragments of green look good between glass, wood and paper ornaments.
With economical decoration, just a few pendants are enough so that you can still see the whole twigs up close.
The full appearance is also determined by the way 1400 twigs are distributed. Start from the place at the shaft. Separate the adjacent shoots, and only then go to the external tips. In this way, greenery will also fill the center of the tree.
On each floor, point some of the legs sideways and a few slightly upwards. After unfolding the lower part, walk away for a few steps. From this distance, it is easier to notice the clearance and move the adjacent twig to it.
✅ From bottom to top – you will keep access to the places at the shaft.
✅ Fan arrangement – each larger branch will show several separate shoots.
✅ Alternating directions – the ends of the adjacent floors will fill the free space between them.
✅ Adhesion for ornament – before hanging a long icicle, tilt the shoot just below it.
✅ View from the room – look at the Christmas tree from the couch or from the entrance and correct its outline.
Once you can see the green needles in the depths, it is easier to decide which tips to leave exposed.
Pine is 220 cm high and its lower branches reach up to 100 cm wide when unfolded. Measure where the longest shoots will be. This is especially important next to the balcony door or at the dresser with wide-extending drawers.
Are you planning to wear a star or spike? To the height of the Christmas tree, add only the part of the ornament that will extend above the top. When set in the corner, also leave enough slack in the back to reach the lights freely.
✅ Near the window – check the range of the opening sash and the place for the curtain.
✅ At the wall – move the stand away enough for the rear shoots to develop.
✅ Next to the table – before you set the tree, move the chair as when getting up.
✅ In a high cavity – take into account the spacing on the sides for protruding baubles.
✅ At the outlet – choose the place from which the cable of your lamps will reach the power outside the passage.
Such a selected place will allow you to see the entire silhouette of the Christmas tree and comfortably dress it from the available sides.
Spacing four-arm steel stand on a level ground in the place where you want to dress the tree. Embed the bottom module and then connect the subsequent parts. Before you start extending the branches, look at the top on the front and side.
When forming shoots, keep a larger branch close to the root. Separate the smaller branches with the other hand. First, form a whole crown, then unfold the lamps, and finally hang the baubles.
✅ Base – check that all the arms of the stand rest against the floor.
✅ Modules – connect them sequentially and check the embedding of each part.
✅ Lower floors – spread the longest branches around the stem.
✅ Wierzchołek – straighten the upper shoot before putting on your own ornament.
✅ Last amendments – go around the tree before hanging the lamp wire.
Ornaments can be hung already on formed branches, without correcting their position at each bauble.
On the dark green needle, the single points of light are also clear when you slide some of the lights closer to the shaft. Lead the wire between floors and push a few lights forward. In the evening you will see light at different depths of the crown.
Try on a larger bauble in the free space between floors, preferably closer to the base of the branch. On the slender tips look beautiful light pendants, for example, paper stars. Leave enough space around them so you can see the whole shape of the ornament.
✅ Traditional red clearly cuts off from pine green.
✅ Bright wood and straw look good against a darker background in the depths of the crown.
✅ Glass baubles suspended near the lamps reflect their light.
✅ Long icicles can be displayed at intervals between floors.
✅ The lamps themselves will emphasize the drawing of twigs and leave visible green spitz.
You can even manually arrange a single shoot, so you can make room exactly for that family bauble you want to show off.
When you take off the last ornament, unwrap the lamps and also look at the inside of the crown. Among the needles often remains a small hook or string. Then bring the branches closer to the shaft and disconnect the modules of the Christmas tree.
You will need a protective card to pack, in which you will receive a tree. Arrange the parts along the box, leaving free space at the tip. Place the stand on the side so that its arms do not press on the twigs during storage.
✅ Fragile baubles put in a separate box before folding the crown.
✅ Cable of lights roll up separately, so that it is easy to expand in the next season.
✅ Shrub tips arrange along larger branches before putting them into the carton.
✅ Store the steel base with the tree so that both elements are at hand.
✅ Dry place will keep the carton until next Christmas.
In the next season, it is enough to reconnect the parts and give the twigs a shape suitable for selected decorations.
✅ Brand – MEMFLOW
✅ Model – diamond pine, artificial Christmas tree
✅ Maximum height – 220 cm
✅ Maximum width – 100 cm
✅ Number of twigs – 1400
✅ Needle material – PVC film
✅ Colour – natural green
✅ Construction – modular, with branches for manual forming
✅ Base – steel stand
✅ Purpose – for interior
✅ Packaging – protective card
✅ Artificial Christmas tree MEMFLOW Diamond pine 220 cm – 1 pc.
✅ Steel stand – 1 pc.
Lamps, baubles and other decorations visible in the arrangements are selected separately.
❓ Will the Christmas tree fit in a one-meter wide cavity?
✅ The crown when unfolded is up to 100 cm wide. In a cavity of the same width, extreme twigs can touch the walls. Leave extra space if you want to decorate the sides as well.
❓ How do I know if my star will fit over the tip?
✅ Measure the distance from floor to ceiling. Subtract 220 cm from the result and compare the rest with the part of the star that will protrude above the tip.
❓ What to do if you see a shaft after unpacking between floors?
✅ Start with the branches near the center of the tree. Separate the adjacent shoots and point a few towards the clearance. At the end, correct the twigs visible from the front.
❓ Where to hang a heavier glass bauble?
✅ Choose a place closer to the base of the branch, support the bauble with your hand and check how the momentum is arranged under its weight.
❓ How to hide the cable so that you can see mainly the lights?
✅ Arrange the wire in the depth of the green crown, and extend the individual lamps between the shoots.
❓ Do I need my own base?
✅ Together with the Christmas tree you get a matched steel stand.
❓ Are photo ornaments included?
✅ The set includes a Christmas tree and a stand. You can use your own lights and baubles.
❓ How to secure the tip when packing?
✅ After disconnecting the modules, place the upper part so that the top has free space. Arrange the stand next to the bottom module, away from the tip.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Brand | MEMFLOW |
| Parametry | Christmas tree type | artificial |
| Parametry | Type | pine |
| Parametry | Color | green |
| Parametry | Height | 201 - 220 cm |
| Parametry | Maximum width | 130 cm |
| Parametry | Maximum height | 220 cm |
| Parametry | Product weight with unit packaging | 15 kg |
| Parametry | Manufacturer code | CHOINKA SOSNA DIAMENTOWA 220CM PREMIUM |
| Parametry | Packaging status | original |



