Dyzelinis oro pūstuvas 8 kW, stovėjimo šildytuvas, 12/24/230V

Trumpai apie prekę

Prekė: Dyzelinis oro pūstuvas 8 kW, stovėjimo šildytuvas, 12/24/230V. Kategorija: Oro šildytuvai.

• Gamintojas: Vevor
• Modelis: 25NYFG7VKF001

The portable air heater uses diesel and offers heating power within the range specified in the instructions 5000 – 8000 W.

You can adjust its operation to your current needs thanks to 5 power levels, 10 – 35°C constant temperature mode, timer and remote control.

During operation, you can change the heating intensity between 5 levels: P1, P2, P3, P4 and P5.

What does this give you in practice?

• lower level when you need quieter heating
• higher level when you want to work harder
• the ability to adjust the operation of the device to current conditions
• no need for continuous operation on one setting

The device has a running memory function.

When you restart, the last used level is automatically restored, so you don’t have to start the configuration from scratch every time.

The heater allows you to switch from manual power level selection to temperature maintenance mode in the range from 10°C to 35°C.

Instead of focusing on a specific gear, you set the temperature to suit your needs and use the automatic operating mode of the device.

The built-in timer allows you to program the automatic switching on of the heater after a certain time.

You can prepare a work schedule in advance, instead of manually starting the device exactly at the moment when you start to need heat.

The timer also allows you to specify the working time after which the device will automatically turn off.

During operation, you can also set a delayed shutdown, so you do not have to remember to manually stop the heater after a certain time.

The heater supports remote control, which can be paired with the device directly from the panel.

After pairing, you do not have to approach the heater every time to use the supported functions.

The device has a separate FN ventilation mode, in which the fan can operate independently.

There are 3 ventilation levels F1–F3, so that the heater is not limited to active heating only.

The heater supports 12V/24V voltage, which can be configured in the device settings.

Thanks to this, the structure is prepared to cooperate with the appropriate power source used in the installation in which the device will be properly installed.

AP mode starts automatic pumping of fuel and heating of the glow plug.

After filling the fuel line, the device can automatically start normal operation, making the procedure of preparing the fuel system simpler.

The device also allows manual control of the fuel pump.

You can start and stop pumping with the appropriate buttons of the device or remote control, controlling the filling of the cable before starting the heater.

The control panel allows you to quickly view the parameters of the device without reaching for additional meters.

On the display you can check m.in.:

• current level of work
• Housing temperature
• supply voltage
• fan speed
• time remaining until automatic shutdown
• information on height

The heater has a system of diagnostic error codes that help determine the type of irregularity detected.

The device can signal m.in. problems with ignition, fuel system, voltage, pump, fan, glow plug, temperature or electronics communication.

According to the specifications, the device has overheat protection set at 180°C.

This is one of the elements protecting the system during the operation of the heater.

The manufacturer specifies the operating temperature range of the device at from -50°C to 50°C.

Thanks to this, the structure has been designed to operate in a wide range of temperature conditions, while maintaining the principles of proper installation and use.

According to the instructions, the heater is designed to work with diesel.

Use fuel in accordance with the specification of the device and do not refuel the heater during operation or when its components are still hot.

The heater burns diesel fuel, so the exhaust system must be properly guided to the outside of the vehicle.

The device must not be used in an enclosed room without adequate ventilation. Proper installation and exhaust gases are essential for the safe use of the heater.

P1–P5 control, 10 – 35°C constant temperature mode, automatic on and off, F1–F3 ventilation and remote control operation allow you to adjust the heater to different usage scenarios.

Instead of a device operating on only one setting, you get a system whose way of working you can change depending on the current temperature and needs.

• device type: portable air heater
• Heating power: 5000 – 8000 W
• power supply: 12 / 24 V
• Rated power of electrical system: 15 – 90 W
• fuel: diesel
• Number of heating levels: 5 – P1/P2/P3/P4/P5
• constant temperature mode: 10 – 35°C
• ventilation mode: yes
• ventilation levels: 3 – F1/F2/F3
• automatic switch-on timer: yes
• automatic shutdown timer: yes
• Last gear memory function: yes
• remote control operation: yes, after pairing
• automatic fuel pumping: yes
• manual control of the fuel pump: yes
• Voltage preview: yes
• Housing temperature preview: yes
• fan speed preview: yes
• Error code system: yes
• Overheating protection: 180°C
• Operating temperature: from -50°C to 50°C
• fuel consumption according to the instructions common to the variants: 0,1 – 0,2 / 0,11 – 0,35 l/h

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	Vevor
Parametry	Kind	oil
Parametry	Product weight with unit packaging	9.13 kg
Parametry	Manufacturer code	25NYFG7VKF001
Parametry	Packaging status	original
Parametry	Energy efficiency class	A++
Parametry	Range of energy efficiency classes	A++ - G