Dyzelinis šildytuvas BESTEN 8 kW BE0002823

Trumpai apie prekę

Prekė: Dyzelinis šildytuvas BESTEN 8 kW BE0002823. Kategorija: Oro šildytuvai.

• Gamintojas: BESTEN
• Modelis: BE0002823

BESTEN BE0002823 is a diesel parking heater with a capacity of 8 kW, designed for m.in. for cars, motorhomes, boats, garages and workshops. The device operates independently of the vehicle engine and can use several power sources.

The model supports 12 V and 24 V DC and 230 V AC, so it can be used both in the vehicle installation and in a place with access to standard mains power supply. The fuel is diesel or fuel oil and the consumption is about 0,2 – 0,5 l/h.

The temperature and operation of the device can be controlled using the mobile application, a remote control with a range of up to 30 m and an LCD panel. The set also includes a fuel tank 5 l and a set of elements needed to perform the intake, supply and combustion system.

The most important in brief

• Heating power: 8 kW
• Power supply: 12 V / 24 V DC and 230 V AC
• Fuel: diesel / fuel oil
• Fuel consumption: 0,2 – 0,5 l/h
• Temperature control: 8 to 35°C
• Control: app, remote control and LCD panel
• Application Connectivity: Bluetooth
• Pilot range: up to 30 m
• Automatic and manual mode
• Fuel tank: 5 l
• Working temperature range: -40°C to +50°C
• Closed combustion chamber
• Overheating protection and safety sensors
• Aluminum housing
• Complete mounting kit

✅ 8 kW – independent heating of a vehicle, motorhome or workshop

The heating power of BESTEN BE0002823 is 8000 W. The device can be used m.in. for heating cars, motorhomes, boats and workshop spaces.

Parking heater works regardless of the operation of the vehicle engine. Warm air is directed to the heated space by an air supply line, while fuel combustion takes place in a separate chamber.

This is especially important when heat is needed during a stopover or in a place where you do not use the factory heating system of the vehicle.

✅ 12 V, 24 V and 230 V – you are not limited to one type of power supply

The BE0002823 can be powered by 12 V or 24 V DC, as well as from the 230 V AC network.

Thanks to this, the device can be adapted to different places of use. 12 V and 24 V installations allow you to use heating in vehicles and machines, while 230 V gives you the ability to connect the device to mains power.

The set includes a power cord 230 V. Other connections should be made in accordance with the user manual of the device.

✅ 0,2 – 0,5 l/h – how much fuel does BESTEN BE0002823 consume?

Fuel consumption is approximately 0,2 to 0,5 litres per hour.

This is not one fixed value for every usage. The amount of fuel consumed depends on the operating parameters of the device and the set heating level.

The set comes with a fuel tank with a capacity of 5 liters.

✅ Application, remote control and LCD panel – choose the most convenient way to control

You do not need to operate the device directly at the housing. BESTEN BE0002823 gives three ways of control: mobile application, remote control and LCD panel.

The application communicates with the device via Bluetooth, while the remote control range is up to 30 meters.

This is particularly practical, e.g. with the device installed in the vehicle or in the designated place of the workshop – the basic control does not require each approach to the heater itself.

✅ 8 – 35°C and two operating modes

The temperature control range is from 8°C to 35°C.

There is automatic and manual mode. This allows you to use the heating in different ways depending on whether you want to set the temperature or control the operation of the device directly.

In automatic mode, the device can adjust its operation in relation to the set temperature.

✅ Closed combustion chamber – heating system and exhaust gases are separated

BE0002823 has a closed combustion chamber. The air heated and directed to the interior and the exhaust gases generated during operation are conducted by separate roads.

However, this does not mean that the heater can be used in an enclosed space without proper exhaust installation. The combustion pipe must be led outside.

When installing in a garage, workshop or other room, you also need to provide fresh air and perform the entire installation according to the instructions.

✅ Overheating protection and safety sensors

The device has overheat protection and a safety sensor system.

These solutions are part of the heater design and support the control of its operation. However, they do not replace the correct installation, proper exhaust guidance or rules of use described in the instructions.

✅ -40°C to +50°C – wide operating temperature range

The operating temperature range of the device is from -40°C to +50°C.

This parameter is particularly important when using heating in vehicles, motorhomes and machines used in winter.

✅ Compact housing – 40 × 37 × 25 cm

The dimensions of the heater are 40 × 37 × 25 cm, and the weight of the device is 8 kg.

The housing is made of aluminium. When choosing the place of installation, it is worth taking into account not only the dimensions of the device itself, but also the space needed to properly guide the air supply, intake and exhaust pipe.

✅ Complete set – intake, exhaust, air supply and fuel tank are already in the box

The BE0002823 is sold as a set with the components needed to perform the installation, not as a heating unit itself.

The set includes m.in. fuel tank 5 l, air filter, silencer, supply line, diesel pipe, intake pipe, remote control and mounting hardware.

It is particularly important to properly perform the combustion and intake system – these elements have a direct impact on the way the device works.

✅ Where can BESTEN BE0002823 be used?

• cars and buses,
• camps,
• boats,
• garages and workshops,
• cabins of construction and agricultural machinery,
• other places where power supply, air supply, air intake and exhaust gases can be properly performed.

📋 Technical data

✔ Brand: BESTEN

✔ Model: BE0002823

✔ Heating power: 8 000 W (8 kW)

✔ Power supply: 12 V / 24 V DC and 230 V AC

✔ Temperature control: 8 – 35 °C

✔ Fuel: Diesel / Fuel Oil

✔ Fuel consumption: 0,2 – 0,5 l/h

✔ Operating temperature range: –40 °C to +50 °C

✔ Control: Bluetooth app, remote control, LCD panel

✔ Pilot range: up to 30 m

✔ Working modes: manual and automatic

✔ Weekly programmer: yes

✔ Bluetooth: yes

✔ Fuel tank: 5 l

✔ Dimensions: 40 × 37 × 25 cm

✔ Weight: 8 kg

What is included in the set?

• parking heater BESTEN BE0002823 8 kW,
• remote control,
• air filter,
• directional nozzle,
• air outlet pipe Ø 8 cm × 63 cm,
• exhaust pipe Ø 2,5 cm × 60 cm,
• intake pipe Ø 3 cm × 50 cm,
• silencer,
• 230 V power cable,
• fuel tank 5 l,
• a set of mounting elements,
• instruction manual in Polish,
• original manufacturer's packaging.

We make every effort to ensure that the descriptions, parameters and photos are reliable, but we do not guarantee full compatibility of colors and details. Differences may result from monitor settings, lighting conditions, device calibration, production batches and manufacturer updates. We reserve the possibility of unintended editorial errors (i.e. description, parameters, label). This information does not restrict consumer rights.

Specifications