Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: 3 eur
Aprašymas
Trumpai apie prekę
Prekė: Elektrinis plytelių siurbtukas su skylės gręžimo pagalba. Kategorija: Plytelėms skirtos siurbtukai.
- Gamintojas: SEESII
- Modelis: CP4C0124EU
Basic technical parameters (shortened, transparent)
- Model: Seesii-S30 AIR, 4-in-1 mounting system
- Drive: dual internal pumping motor with automatic vacuum inflation
- Maximum suction capacity: 280 kg
- Suction base size: 25.4cm (10 inches) , 20mm silicone rubber thickness
- Power supply: 4 Li-ion 3000 mAh batteries, USB-C charging port
- Single battery charging time: 3 hours
- Operating time of the whole battery pack: 9 to 10 hours (for 2×2 m boards)
- Operating temperature range: -20°C to 80°C
- Supported materials: all smooth surfaces (glass, marble, ceramic tile, metal, MDF, plastic)
- Mounting system: quick couplers, replacement of accessories without tools in seconds
The main advantages
Advantage 1: Dual motor with automatic vacuum inflation, prevents heavy plates from falling
- User pain: During long installation, the suction weakens, the marble plate or glass falls – the risk of damage to the material and injury to the body.
- Disadvantage of cheap suction cups: One weak motor without pressure sensor, no automatic inflation; after 10 to 15 minutes, the suction disappears completely.
- Product design: Two independent pumping motors, built-in vacuum pressure sensor; when the suction value falls below the norm, the device automatically inflates the air. Internal seals made of double layer of rubber prevent air leakage even with micro-damage to the surface. Constant suction force throughout the working shift, elimination of the risk of heavy elements falling, safe operation without constant checking the adhesion.
Advantage 2: Digital LED display with pressure preview, real-time safety control
- User pain: You can't see the suction power of the suction cup; you don't know whether it's safe to pick up a large board -- guesswork instead of data.
- Disadvantage of cheap replacements: No screen, no information about battery status and pressure; the user does not know when the device will lose power.
- Product design: Transparent LED display built into the upper body, displays pressure value, battery level and alert when suction drops. Screen resistant to scratches and temperature changes.
- Solution effect: The user has full information about the condition of the device at a glance, avoiding dangerous situations caused by an unconscious decrease in suction power.
Advantage 3: 4-in-1 system with screw quick couplers, one tool for all stages of tile assembly
- User pain: Separate tools are needed for each assembly operation – a large amount of wearable equipment, wasted time replacing tools.
- Disadvantage of cheap suction cups: Only lifting function, no possibility of leveling, leveling seams or guide for drilling; additional accessories do not fit or mount for a long time.
- Product design: Universal mounting points with quick-release screws, replacement of accessories in 3 seconds without keys; four interchangeable modules for lifting, drilling, 90° corner alignment and plane leveling. Accessory lock mechanism with metal elements, wear-resistant after thousands of replacements.
- Solution effect: One set replaces four different repair tools, saving space in the tool bag and reducing working time by more than 30%.
Advantage 4: 4 3000 mAh batteries included, work throughout the renovation shift without a break for charging
- User pain: During a full-day renovation, the battery drains after 2 to 3 hours; you have to stop working and wait for charging.
- Disadvantage of cheap counterparts: Only 1 to 2 small batteries with a capacity of 1500 to 2000 mAh, working time up to 3 hours, charging time up to 5 hours.
- Product design: Four replaceable 3000mAh lithium-ion batteries with USB-C fast charging system, each battery equipped with overcharging and overheating protection. Battery sockets with metal contacts, no loss of power with frequent replacement.
- Solution effect: Total working time 9 to 10 hours, enough for a full renovation change without interruptions; fast charging 3 hours reduces the waiting time for energy replenishment.
Advantage 5: Thick natural rubber 20 mm on suction base, does not scratch delicate surfaces
- User pain: The thin rubber of cheap suction cups leaves scratches on marble, glass or glossy tiles – damage to customer material and complaints.
- Disadvantage of cheap products: Thin plastic rubber less than 10mm thick, hard, quickly cracks and scratches smooth surfaces; poor adhesion on slightly damp materials.
- Product design: 20mm thick soft natural rubber base, textured inner surface improves grip on dry and slightly damp materials. The rubber can be replaced on its own after use.
- Solution effect: No scratches on marble, glass and ceramic tiles, stable suction even on slightly wet surfaces, long service life of the suction base.
Advantage 6: Wide operating temperature range -20°C to 80°C, suitable for outdoor and winter renovation
- User pain: In winter, on the construction site, cheap suction cups lose the elasticity of the rubber, suction disappears at low temperatures; in summer, under the influence of hot rubber deforms.
- Disadvantage of cheap substitutes: The rubber base loses its properties at temperatures below 0°C and above 50°C, the engines overheat with long work in the sun.
- Product design: All temperature resistant rubber components, motors with internal cooling system, frost and hot resistant plastic housing.
- Solution effect: The ability to work outdoors all year round, without losing suction parameters in winter and summer.
Advantage 7: Ergonomic non-slip handle and carrying case, convenient carrying of the whole set
- User pain: During long holding of the suction cup, the hands hurt; all elements of the set fall apart during transport, the risk of losing accessories.
- Disadvantage of cheap versions: Smooth plastic handle glides in sweaty or dirty hands, no storage case – accessories easily die.
- Product design: Textured non-slip rubber handle, shape to fit the builder's hand; hard EVA case with matching compartments for all elements of the set.
- Solution effect: Less hand fatigue after hours of work, safe storage of all equipment without the risk of losing parts.
Contents of the complete set
- Electric suction cup Seesii-S30 AIR with a size of 10 inches × 2 pieces
- Replaceable lithium-ion battery 3000 mAh × 4 pieces
- USB-C charging cable × 2 pieces
- Quick release screws for mounting accessories × 4 pieces
- Multi-hole guide for drilling in plates × 1 piece
- Element for leveling corner seams 90° × 1 piece
- Clamp for fitting and leveling stone countertops × 1 piece
- User manual in Polish and English × 1 piece
- Durable EVA transport case for the whole set × 1 piece
Frequently Asked Questions
P1: What materials does this suction cup work on?
A: Suitable for all smooth surfaces: window glass, marble, ceramic tile, metal sheet, MDF, plastic. Does not work on rough, porous surfaces without processing.
P2: How many kilograms does one suction hold?
A: Maximum load capacity of 617 lbs (approx. 280 kg) per piece; for transporting large panes it is recommended to use two suction cups at the same time.
P3: Does the rubber base draw marble or glossy tiles?
A: The base made of soft natural rubber with a thickness of 20 mm, does not leave any scratches on delicate stone and glass surfaces.
P4: How many hours of operation do the four batteries in the set provide?
A: A total of 9 to 10 hours of continuous operation with standard 2×2 m boards, enough for all-day repairs without charging.
P5: Can I quickly replace leveling and drilling accessories?
A: Yes, screw quick couplers are used – it takes up to 3 seconds to replace any module, without additional tools.
P6: Is the device suitable for outdoor work in winter?
A: The operating temperature range is from -20°C to 80°C, you can freely use the suction cup on construction sites in winter and on hot summer days.
P7: Is there a suitcase included to transport all your gear?
A: Yes, the included durable EVA case with matching compartments protects all items from damage while wearing.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | Without VAT invoice |
| Parametry | Brand | SEESII |
| Parametry | Product weight with unit packaging | 3.3 kg |
| Parametry | Manufacturer code | CP4C0124EU |
| Parametry | EAN (GTIN) | 765429192261 |
| Parametry | Packaging status | original |
| Parametry | Device weight | 250 kg |
| Parametry | Certificates of conformity | CE |
| Parametry | Series | Seesii-S30 AIR- |
| Parametry | Lifting capacity | 3.3 kg |



