Elektrinis šildytuvas Xiaomi Smart Graphene, 2000 W, su 70° pasukimu

Trumpai apie prekę

Prekė: Elektrinis šildytuvas Xiaomi Smart Graphene, 2000 W, su 70° pasukimu. Kategorija: Elektriniai šildytuvai.

• Gamintojas: Xiaomi
• Modelis: LSNFJ04ZMUE

Graphene heater

The modern heater with graphene coating combines the speed of heating, energy-saving operation and convenience of smart control. Thanks to the power of 2000W, a wide angle of heat distribution and intelligent temperature control, it creates a pleasant atmosphere in an apartment or office in just a few moments.

The most important features

✅ 3-second heating - instant heat after start-up

✅ Graphene heating coating - fast and even heat distribution

✅ Power 2000W / 1200W - adapting to temperature and needs

✅ Working modes - hot, warm and natural breeze

✅ Oscillation 70° - even heat distribution

✅ Intelligent temperature control - comfort and energy saving

✅ Smart control - Xiaomi Home app and voice commands

✅ Safety - protection against overheating and switching off when tilted

You no longer have to wait for a traditional heater to heat up. This model uses a graphene conductive coating in combination with a ceramic PTC element, thanks to which it provides the perceived heat in just 3 seconds from start-up.

Graphene conducts heat much better than aluminum or copper, which means faster and more even heating of the entire room.

➡ Natural warmth like from the sun

The secret lies in the infrared radiation FIR. The emitted waves with a length of 8 to 14 μm are close to the natural frequency of the human body, which gives a heating effect reminiscent of relaxation in the sun. Thanks to this, the heat reaches deeper, enveloping the whole body and eliminating the feeling of coolness in the feet or hands.

➡ Stable temperature and smaller bills

Thanks to the intelligent control system, the device independently adjusts the heating power to maintain a comfortable temperature. You avoid overheating, sudden heat fluctuations and unnecessary waste of energy. This not only means greater convenience, but also real power savings during everyday use.

➡ Comfort throughout the room

The oscillation in the range of 70° ensures that warm air is distributed evenly in each direction. You do not have to sit right next to the radiator to feel its operation – the device gradually envelops the entire room with a gentle, pleasant stream of heat.

➡ Modes to suit every situation

The device offers three air flow modes. You can choose strong 2000W mode, which will quickly warm the room on a chilly morning, softer 1200W mode on a daily basis or natural breeze when you want to refresh the room without additional heating. Thanks to this, the heater will work not only in winter, but also during transitional periods when you do not need intensive heating.

➡ Modern controls – just the way you like them

You have at your disposal a large touch panel located at the top of the device – just one tap to check the status or change the mode of operation. If you prefer remote control, use the Xiaomi Home app, which allows you to turn on the heater, set a schedule and control the temperature from anywhere.

In addition, the device works with the Google Assistant voice assistant – just a short command to start or end heating. It is a convenient solution that will be appreciated by people who value modern technologies and quick access to comfort.

➡ Safety first

Every detail was taken care of during the design. The heater has protection against overheating, and in the event of overturning – it will automatically turn off. The housing is made of flammable materials class V-0, which increases the safety of everyday use. So you can use it at home or in the office without worry.

➡ Practical tips for use

To take full advantage of the heater, it is worth following a few simple rules. You will get the best effect when you first set the device to the highest power level and all doors and windows remain closed. Allow it to work for about 20 to 30 minutes to retain heat in the room and minimize its loss. Then you can adjust the temperature to suit your needs.

The heater is designed for in close proximity use. You will get the most noticeable and comfortable heating when the device is 1 to 2 meters away. This is a great solution, e.g. at your desk, on the couch or in the bedroom, when you want to quickly heat up a specific zone.

➡ Easy cleaning and care

To maintain high efficiency and safety, the heater should be cleaned regularly. All you need is a soft, damp cloth, which you gently wipe the housing and the air intake filter. If you prefer, you can use the vacuum cleaner to quickly remove dust from the filter. It is important that do not allow water to enter the device, as this could damage it.

➡ Who will like it the most?

This model is a proposal for everyone who does not want to waste time waiting for the house to get warm. It is a device that combines speed, safety and modern control, which is why it is perfect for everyday use.

✅ For people who want to instantly warm up the room on cold mornings

✅ For families who value safety and stable thermal comfort

✅ For those working from home who care about an economical and effective heat source

✅ For smart home users who want to control the heating through the app and voice

Technical specification

Product Name: Xiaomi Smart Graphene Heater

Model: LSNFJ04ZMEU

Rated power: 2000W

Rated voltage: 220 – 230V~

Net weight: approx. 2,3 kg

Device dimensions: Ø176 × H467 mm

Contents of the set:

• Xiaomi Smart Graphene Heater ×1
• User manual ×1

Specifications