Epoksidinė remonto masė WURTH LIQUID METAL, 120 g, greitas naudojimas

Trumpai apie prekę

Prekė: Epoksidinė remonto masė WURTH LIQUID METAL, 120 g, greitas naudojimas. Kategorija: Baterijų testeriai.

• Gamintojas: Wurth
• Modelis: 0893449011

Area of application

For filling surface damage to metal components, e.g. transmission housings, aluminium and cast iron castings, etc.

steel (uncoated or anodized), zinc sheet, cast iron, aluminium, copper, brass, chromium, titanium, lead and stainless steel

Instruction

1. The surface intended for repair should be clean, degreased, with good load capacity. Pre-tarnishing increases bonding durability

2. Peel off or cut off the required amount of product, then work it in your fingers until a uniform color is achieved

3. Then apply the repair mass within 2 to 3 minutes

4. Moisten hands (protective gloves) with water to facilitate the modeling process

5. Okay, okay. 20 min mass reaches the degree of hardening allowing for further processing (drilling, milling, grinding, sawing, etc. ).

Two-component mass for quick and simple repairs of surface damage.

• Chemical Base: Epoxy Resin
• Color: Silver
• Density: 2,5 g/cm³
• Length: 175 mm
• Diameter: 22 mm
• Min. /max. Duration of use: 2-5 min
• Possibility of further processing after min.: 20 min
• Further processing – conditions: 20°C
• Final strength after min.: 3 h
• Final strength – conditions: At temp. 23°C
• Min. /max. Application temperature: 5 to 25 °C
• Thermal resistance after curing min./max.: -20 to 120 °C
• Short-term temperature resistance max.: 150 °C
• Good adhesion substrates: Copper, Brass, Aluminium, Lead, Chrome, Stainless steel, Cast iron, Steel (uncoated and anodized), Titanium, Zinc sheet
• Shore Hardness Type D: 85
• Min. tensile strength: 6.4 N/mm²
• Storage time after production/conditions: 24 Months / store in a place protected from frost and solar radiation

Specifications