FPV dronas BETAFPV Pavo20 Pro II 3S su O4 Pro SBUS ir kamera, nauja versija

Trumpai apie prekę

Prekė: FPV dronas BETAFPV Pavo20 Pro II 3S su O4 Pro SBUS ir kamera, nauja versija. Kategorija: Dronai ir multikopteriai.

• Gamintojas: BetaFPV
• Modelis: Pavo20 Pro II

THE MOST IMPORTANT FEATURES

• BETAFPV Pavo20 Pro II version 3S O4 Pro SBUS.
• Digital video system DJI O4 Air Unit Pro included.
• DJI SBUS receiver.
• Brushless Whoop kinematics.
• Wheelbase 93,9 mm.
• LAVA Series 1104 7200KV engines.
• F4 2–3S 20A AIO flight controller.
• GF D2.2 3-Blade propellers.
• Dedicated O4 Air Unit Pro Bracket.
• DJI O4 Air Unit Pro support.
• Integrated buzzer.
• Dedicated GPS mounts.
• Support 12× 12 mm and 18 × 18 mm GPS modules.
• NightFire RGB LED strip.
• Factory tuning of parameters under DJI O4.
• Battery connector XT30.
• Flight time to about 7 min 30 s with 3S 580 mAh.
• Flight time to about 9 min with 3S 680 mAh.
• Designed for freestyle and cinematic FPV.

The product offered at this auction is original, factory packed and comes from the official distribution

BETAFPV PAVO20 PRO II BRUSHLESS WHOOP QUADCOPTER – 3S O4 PRO SBUS

BETAFPV Pavo20 Pro II 3S O4 Pro SBUS is an advanced Brushless Whoop FPV drone designed for dynamic freestyle and recording high-quality materials from the air. This version combines a powerful 3S drive with a digital DJI O4 Air Unit Pro video system and a DJI SBUS receiver.

The 93,9mm wheelbase design has been optimized for high flight dynamics, stability and the ability to harness the full potential of the DJI O4 Pro system. This is a proposal for pilots who expect not only great volatile properties, but also high-quality images from the air.

DJI O4 AIR UNIT PRO – DIGITAL FPV IN HIGH QUALITY

The most important element of this version is the factory-installed DJI O4 Air Unit Pro. The system provides high-quality digital FPV image transmission and at the same time allows you to record video directly during flight.

The O4 Pro is integrated into the Pavo20 Pro II design with a dedicated handle that helps reduce the impact of vibration on the video system. Thanks to this, the drone is prepared for both dynamic freestyle and more smooth cinematic FPV shots.

SBUS VERSION – FOR DJI APPARATUS

The SBUS variant uses communication designed to work with compatible DJI devices. This allows you to use the DJI ecosystem to control your drone without the need for an ExpressLRS receiver.

In the case of this version, the user receives the DJI O4 Pro + DJI SBUS configuration, while the ELRS variant uses a 2.4 GHz ExpressLRS serial receiver.

3S DRIVE – LAVA 1104 7200KV

The Pavo20 Pro II version 3S is equipped with four brushless LAVA Series 1104 7200KV motors. The high KV value has been selected to work with 3S batteries, ensuring fast responses and high flight dynamics.

The combination of engines with three-bladed GF D2.2 3-Blade propellers allows you to get the right level of thrust and responsiveness needed during freestyle.

F4 2–3S 20A AIO

The F4 2–3S 20A AIO flight controller is responsible for controlling. The board has been specially developed to work with digital HD systems and provides adequate performance for 3S configurations.

The controller is equipped with two BEC chips: 9 V / 2 A designed to power the DJI O4 system and 5 V / 3 A for external devices. Dedicated HD VTX connectors and a conveniently located USB port simplify installation, configuration and subsequent service.

3S – DYNAMICS AND EFFICIENCY

The 3S configuration has been developed to combine the dynamic nature of flight with reasonable uptime. With the LAVA II 3S 580 mAh battery, the flight time is up to about 7 minutes and 30 seconds, while with the LAVA II 3S 680 mAh battery it can reach about 9 minutes.

The actual flight time depends on the pilot style, weight of equipment, weather conditions and the battery used.

NEW PAVO20 PRO II FRAME

The Pavo20 Pro II uses a new frame design with a wheelbase of 93,9 mm. The use of a guided system of mounting points and a structure fastened with four screws facilitates installation and increases the rigidity of the entire structure.

The frame has also been prepared for the installation of DJI O4 systems, including O4 Pro, without the need for additional, non-standard elements.

STABILITY FOR DJI O4 PRO

The dedicated O4 Air Unit Pro Bracket is designed to provide a stable mount for your digital video system and reduce the impact of drive-generated vibrations.

This is particularly important when recording video footage, as vibration limitation helps maintain high image quality.

PROPELLERS GF D2.2 3-BLADE

The Pavo20 Pro II uses three-blade GF D2.2 3-Blade propellers. Propellers are additionally fixed with screws, so they are not only pressed on the motor shaft.

This solution reduces the risk of loosening the propeller during intense flying and provides a more secure connection to the engine.

BUILT-IN BUZZER

The Pavo20 Pro II features an integrated buzzer that makes it easy to find your drone after an emergency landing.

This is a practical solution especially when flying outdoors, where the drone can land in high grass or other hard-to-reach place.

READY FOR GPS

The design has dedicated GPS mounts compatible with most modules with sizes 12 × 12 mm and 18 × 18 mm.

Thanks to this, you can expand the configuration with a GPS module without having to design the mount yourself.

NIGHTFIRE RGB LED

The Pavo20 Pro II features an integrated NightFire RGB LED tape, which improves the visibility of the drone during flight and helps the pilot determine its orientation in space.

The backlight also gives the structure a distinctive look during flights at dusk and after dark.

FILTERS ND TO DJI O4 PRO

The DJI O4 Pro supports additional filters so you can better control exposure when recording in bright conditions.

BETAFPV recommends ND8, ND16 and ND32 filters, as well as a UV filter. They allow you to better adjust the exposure and get a more natural motion blur when recording.

FACTORY TUNING FOR DJI O4

The Pavo20 Pro II is pre-configured to work with the DJI O4 system. Properly selected PID parameters allow you to start the flight without having to perform full tuning of the controller yourself.

Thanks to this, the drone can be quickly prepared for flight after configuring the equipment and other elements of the system.

FOR FREESTYLE AND CINEMATIC FPV

The Pavo20 Pro II combines the features of a lightweight whoop with the capabilities of the DJI O4 Pro digital system. The large amount of available thrust allows for dynamic maneuvers, while the properly designed design and VTX mount also allow the drone to be used to create smooth cinematic shots.

It is a universal platform for pilots who do not want to limit themselves to one style of flying.

CONTENTS OF THE SET

1 * Pavo20 Pro II Brushless Whoop Quadrocopter (O4 Pro)

4 * Gemfan D2.2 3-blade propellers

1 * Type-C to SH1.0 Adapter

1 * SH1.0-4-pin adapter cable

1 * HD SH1.0-6-pin cable (100 mm)

1 * RGB LED strip (500mm)

2 * 5,8 GHz VTX Antenna

1 * 5,8 GHz VTX Antenna Holder

1 * 22 x 22 mm GPS Holder

1 * 14 x 17 mm GPS holder

2 * GPS sponge mat

1 * Allen Screwdriver H1.5

1 * O4 Air Unit Pro user manual

The kit does not include a battery and control apparatus.

In the case of the apparatus, a solution compatible with DJI SBUS should be used. For the Pavo20 Pro II 3S there is a dedicated version of the SBUS software, designed for use with the DJI controller.

TECHNICAL SPECIFICATION

Model: BETAFPV Pavo20 Pro II Brushless Whoop Quadcopter

Version: 3S O4 Pro SBUS

Type: Brushless Whoop / FPV

Axle spacing: 93,9 mm

Flight Controller: F4 2–3S 20A AIO

Receiver: DJI SBUS

Video system: DJI O4 Air Unit Pro

VTX Mount: O4 Air Unit Pro Bracket

Engines: LAVA Series 1104 7200KV

Propellers: GF D2.2 3-Blade

Battery connector: XT30

Battery space width: 29 mm

Flight time: up to 7 min 30 s with LAVA II 3S 580 mAh / up to 9 min with LAVA II 3S 680 mAh

Lighting: NightFire RGB LED Strip

GPS: compatibility with 12× 12 mm and 18 × 18 mm modules

Camera filters: vertical mounting

Recommended batteries: LAVA II 3S 580 mAh, LAVA II 3S 680 mAh, LAVA 3S 450 mAh 75C, LAVA 3S 550 mAh 75C

Mass with DJI O4 Pro: about 116,2 g

Specifications