Garų lygintuvas 2200W, keramikinė pado danga, apsauga nuo lašėjimo ir kalkių

Trumpai apie prekę

Prekė: Garų lygintuvas 2200W, keramikinė pado danga, apsauga nuo lašėjimo ir kalkių. Kategorija: Lygintuvai.

• Gamintojas: Emavo
• Modelis: ŻELAZKO PAROWE ANTI-DRIP ANTI-CALC STRAŻAK
• Galia: 2200 W

1. ✔ Self Cleaning - Self-cleaning
2. ✔ Anti-Calc - Anti-limestone system
3. ✔ Anti-Drip - Dripping lock
4. ✔ Vertical ironing
5. ✔ Sprayer
6. ✔ Adjustable pair
7. ✔ Steam strike
8. ✔ Auto-Stop- Automatic switch "Firefighter"
9. ✔ Horizontal work

⭐ Very functional steam iron with a power of 2200W.

⭐ Thanks to its durable ceramic alloy and relatively light construction, it is perfectly guided on any material.

⭐ Ball cable attachment reduces looping, 1,8 meter cable allows you to work in a convenient place even away from an electrical outlet.

⭐ Attractive appearance, solid workmanship, rubberized handle and rubber pads on the back are undoubtedly the advantages of the iron.

The iron is equipped with a self-cleaning system - preventing the deposition of scale and minerals.

The built-in limescale prevention system is designed to reduce the formation of limescale when steaming, however, it is not able to completely stop the natural limescale deposition process.

Therefore, sometimes when working with steam through holes in the foot, particles of ka may come out

This function is used to remove scale and minerals deposited in the device.

It is recommended to perform descaling at least once a month.

The frequency depends on the hardness of the water used, the harder the cleaning should be done more often.

The function is activated by the Self Cleaning button.

This is a system that stops water from flowing out of the iron foot at low temperatures.

During use, the system works automatically. During operation, it can make a loud hissing sound, especially during heating and cooling.

This phenomenon is completely normal and indicates that the system is working properly.

The function uses the steam strike function with the difference that the iron is arranged in an upright position.

When using this function, hold the iron at a distance of about 15-30 cm

The washer function can always be used, regardless of other iron settings.

The sprayer starts with a button at the handle.

For the function to work, it may be necessary to press the washer button several times.

Set the steam quantity switch in the correct position (with "Min" the smallest amount of steam and "Max" the largest amount).

The amount of steam excreted also depends on the thermostat setting - at a lower temperature (one dot or two dots) less, and at a larger (three dots) more steam.

This function causes a single discard of a large amount of steam approx. 36g/min for a better effect when ironing difficult to iron materials or heavily crumpled materials.

The steam strike only works properly on the setting (three dots) or "Max".

When you press the button at the handle, a strong stream of steam will be ejected from the holes in the foot of the iron.

If necessary, the action can be repeated by waiting a few seconds.

It is not recommended to use this function more than three times in a row.

Note - you may need to press the "steam strike" button several times to run this function.

✍ Auto stop system

The Auto STOP function is a system that automatically turns off the unattended iron connected to the current.

This system is very sensitive and can turn on (turn off the iron) when ironing too slowly.

It is enough to move the iron dynamically to restart it.

✍ Auto STOP in horizontal position

If the connected iron is left unattended in a horizontal position (for ironing), the system will react after approx. 30 seconds.

After this time, the iron will be automatically turned off - we will hear a short beep.

✍ Auto STOP in vertical position

If the connected iron is left unattended in an upright position, the system will react after approx. 8 minutes.

After this time, the iron will be automatically turned off - we will hear a short beep.

To restart the iron, you need to move the iron dynamically.

Ball cable attachment reduces cable looping.

Thanks to its durable ceramic alloy and relatively lightweight construction, it is perfect for handling any material.

The ball cable attachment reduces looping, the 1,8 meter cable allows you to work in a convenient place even away from an electrical outlet.

• Power max. (W): 2200
• Power supply (V): 220-240 / 50-60 Hz
• Control lamps: Yes
• Foot: Ceramic
• Self-cleaning: Yes
• Anti-limestone system: Yes
• Drip lock: Yes
• Vertical ironing: Yes
• Cable length (m): 1,8
• Water tank capacity (ml): 330
• Sprayer: Yes
• Adjustable pair: Yes
• Steam impact: Yes
• Automatic switch "Firefighter": Yes
• Horizontal work: Yes
• Folding handle: No
• Removable water tank: No

Specifications