Grandininis pjūklas 40 cm GUIDE juosta su 2 grandinėmis, 66 nareliai, 0.325", 1.5 mm

Trumpai apie prekę

Prekė: Grandininis pjūklas 40 cm GUIDE juosta su 2 grandinėmis, 66 nareliai, 0.325", 1.5 mm. Kategorija: Pjūklai.

• Gamintojas: NAC
• Modelis: 16'' 40CM 325 1,5 + 2 ŁAŃCUCHY 66 OGNIW

GUIDE 16'' 40CM 325 1,5 + 2 CHAINS 66 LINKS

GUIDE 16'' 40cm 325 1,5 + 2 CHAINS FOR SAW

Standard guide with reduced tendency to bounce.

Application: Ideal for universal applications in forestry and agriculture and for occasional users. It is particularly suitable for cutting branches, as well as for cutting from the right and left.

The guide is made of a very hard material resistant to abrasion and high temperature, which is formed during the operation of the chainsaw. They work in the most difficult conditions without being damaged. Ideally transfer the power of the saw to the cutting performance.

• low weight of the guide

• Guide 16" 40cm
• Chain stroke 325"
• Guide groove width - 1,5mm
• Number of guide cells - 66
• Number of cutting cells - 33
• Chain for guide 16" 40cm
• Chain stroke 325"

High-performance "full chisel" cutting links with a sharp profile.

The guide links have special projections to reduce kickback.

The Vibe-Ban concept used in the design allows for a reduction of vibration levels by at least 25% in the saw handles.

Lubrilink connecting links help keep the oil where it is needed – on the chain.

Lubriwell oil holes in the chain drive links help distribute oil along the full length of the bar groove

The reference mark on the top surface of the tooth facilitates its correct sharpening

Recommended for petrol chainsaws from 35 to 60cc.

• Husqvarna: 36, 40, 42, 45, 51, 136, 154, 240, 242, 254, 257, 262, 339XP, 340, 345, 346, 346XP, 350, 353, 357, 357XP, 359, 435, 435E, 440E, 445, 445E, 450E, 455 RANCHER, 460 RANCHER, 460, 455E RANCHER, 41, 44, 50, 133, 137, 141, 142, 234, 238, 242XP, 246, 261, 351, T435, 444, 235, 560XP, 440, 550, 450, EL1400, EL1500, EL1600,
• Oleo-Mac: 938, 940, 941, 942, 942C, 945, 946, 947, 950 Super, 950A, 950, 951, 952, 956, 962, E300F, 850,
• Solo: 639, 641, 644, 645, 647, 650, 651, 652, 656, 665,
• Makita: DCS430, DCS460, DCS500, DCS5030, DCS520, DCS4300I, DCS5200I, DCS431, 45, DCS4600S, DCS5000, DCS43001,
• Jonsered:370, 380, 410, 420, 425, 435, 45, 450, 451, 451EVS, 452, 455, 490, 49SP, 50, 51, 52, 510, 520, 521, 525, 535, 590, 2012, 2014, 2015, 2016, 2036, 2040, 2041, 2045, 2050, 2051, 2054, 2055, 2145, 2147, 2149, 2152, 2150, 2153, 2155, 2156, 2159, 2163, CS2149W, CS2152W, 2063, 2141,
• Dolmar: 109, 110, 111, 112, 113, 114, 115i, 116, PS460, PS4600, PS4605, PS500, PS5000, PS510, PS5100S, PS540, ES1800,
• Partner: 365, 400, 405, 410, 450, 460, 465, 495, 500, 510, 540, 545, P500, P5000, P5500, 470,
• ZenoahG38, G415AVS, G410AVS, G455AVS, G46, G500AVS, G5300, G5000,
• HomeliteHCS4040, HCS4446CA, 250, 252, 290, 290C, 300, 340C, 3850B, 415B, 4550B, 4045, 340, 3850C, 444,
• Nac : SPS01-45, SPS02-45, SPS01-52, YD40, YD 40/45, YD52, NO-CS38,
• Echo: 4510,
• Shindaiwa: 451S,

And Chinese saws: Eurotec, KraftDelle, FLora, Harder, Matrix, Nac , Victus, Magnum, VD Profi, PN 4500, Pn 5200, Steel and others

Specifications