Grandininis pjūklas STIHL MSA 300.1 C-O, akumuliatorinis, 40 cm, 3,5 kW

Trumpai apie prekę

Prekė: Grandininis pjūklas STIHL MSA 300.1 C-O, akumuliatorinis, 40 cm, 3,5 kW. Kategorija: Pjūklai.

• Gamintojas: Stihl
• Modelis: 11482000179
• Galia: 1800 W

Article No.: MA022000085

The STIHL MSA 300 C-O cordless chainsaw delivers high performance for professionals in **landscaping, forestry, and municipal services** for **felling, limbing, and cutting small to medium-sized trees. Choose from three operating modes (eco, felling, and limbing)** to configure the chainsaw for specific tasks. In addition to a very good power-to-weight ratio, simple operation and well-thought-out ergonomics contribute to high working comfort.

Full power of 3.5 kW is achieved by the highly efficient STIHL AP 500 S battery, which was developed for this chainsaw and features a **chain speed of up to 30 m/s**. Used in conjunction with the STIHL Light 04 guide bar, the .325" RS Pro saw chain achieves **high cutting performance with reduced weight**. Professionals also appreciate the **durable, weather-resistant design** of the STIHL MSA 300 C-O. The STIHL anti-vibration system reduces vibrations and eases strain on muscles and joints. The **oil** sensor continuously measures the amount of chain oil in the unit to minimize downtime.

The service cover makes the filter easily accessible, which is extremely beneficial for quick servicing and cleaning of the MSA 300 C-O cordless chainsaw. This is the first STIHL chainsaw equipped with an **operational and informational cockpit** that provides all necessary data and information about the saw. It is also ready for online operation with the STIHL Smart Connector 2 A.

Our overview of battery run times and charging times shows how long STIHL battery-powered tools can be operated and how long it takes to charge the installed AP battery. The overview also shows which AP battery is recommended for your STIHL tool.

All battery-powered tools in the STIHL AP-System are designed for professional users and daily work, including in adverse weather conditions. The battery-powered tools are splash-proof from all sides, and their effectiveness is verified by internal tests. For the STIHL MSA 300, the internally verified splash protection has also been certified to meet the IPX4 protection rating.

Note: STIHL recommends STIHL SynthPlus, STIHL BioPlus, and STIHL ForestPlus chain oils. The chainsaw can also be operated with other light-duty mineral oil-based chain oils.

Note: The full functionality of this cordless chainsaw can only be utilized when powered by the STIHL AP 500 S battery. Using other STIHL batteries may mean that some functions are not available, or that the maximum possible cutting performance cannot be achieved.

Power Boost

MAXIMUM EFFICIENCY. Thanks to intelligent electronics, STIHL tools and batteries communicate with each other. If the device and battery are equipped with the POWER BOOST function, the battery always provides the maximum possible power for the application. To ensure optimal battery life, the device temporarily adjusts power if used too intensively.

Constant Power

CONSTANT POWER, REGARDLESS OF THE STATE OF CHARGE OF THE BATTERY. For battery devices of other brands, performance usually decreases during operation when the battery is discharged. This is not the case with STIHL constant power battery devices. Thanks to intelligent electronics, the STIHL operates at a constant power

Oil Sensor

TO CONTROL AND MONITOR THE OIL SUPPLY FOR LUBRICATING THE SAW. The oil sensor LED display informs you about the oil supply for chainsaw lubrication. If the LED is glowing red, it means that there is not enough oil in the tank to lubricate the chainsaw. If the amount of oil is sufficient, the LED does not light up.

Adjustable Oil Pump

Allows for accurate, suitable lubrication. The E-designation guarantees that the right amount of oil is delivered in all operating conditions. Professionals dose accurately. The pump reduces oil consumption by up to 50%.

Nonwoven Air Filter

FOR EFFECTIVE PROTECTION OF ELECTRONICS AND ENGINE PARTS. The nonwoven air filter filters sawdust, fine dust and dirt from the cooling air stream. In this way, the heat sinks of electronics and the engine are kept clean for a long time. The dismantled non-woven air filter can be easily cleaned with STIHL Varioclean and used again. It should be cleaned regularly.

Tool-free Operation of Oil Filler Stopper

QUICK AND EASY. With a lock, you can open and close the tank stopper without tools, in a few simple steps.

Operating Handle With Potentiometer

CONVENIENT OPERATION. You can use the operating handle with potentiometer function to smoothly adjust the speed of the saw, and thus easily control and control the power accordingly.

Information and Control Panel

REVIEW OF THE MOST IMPORTANT INFORMATION. The large LED display shows important information about the current status of the saw on an ongoing basis. Displays the selected operating mode, provides information about the chain brake and oil supply to the chain.

Modes of work

ADAPTATION TO THE TYPE OF WORK. This saw offers 3 different operating modes. In “Eco” mode, the saw operates at reduced power to maximize battery life. In “cutting” mode, the user is assisted by the highest possible torque at reduced chain speed to saw as evenly and with high power. In “creation” mode, it offers a particularly high chain speed for precise cuts. Operating mode is controlled by an activation button.

Electronic Power Control

EFFECTIVE PERFORMANCE CONTROL. The lowering function offers 2 benefits in operation: On the one hand, this function protects the chainsaw from possible overheating by reducing the power supply. On the other hand, it informs the user by reducing the power that the battery charge rate is very low. In both cases, the started cuts can be completed.

Ergonomic Unlock Button

FOR SAFE START-UP. By pressing the unlock button, you can turn on the controlled operation of the device. Only after pressing it can you start the trigger button. Activation is indicated by an LED. Then you need to start working within 5 seconds, otherwise the device will turn off again. This prevents the device from unintentionally starting during standstill, for example during transport or service.

Compatible with Smart Connector 2 A

COMPATIBLE WITH SMART CONNECTOR 2A. The Smart Connector 2 A can be mounted in the device housing in a dedicated place. Once installed, it connects to the control unit and transmits valuable device data to your smartphone, tablet or connected STIHL device, which is within range. Using the STIHL connect app and the STIHL connected portal, you can view the collected work data and use additional functions.

Technical data

• Rated Voltage: 36 V
• Max. Voltage: 40 V
• Power consumption: 3.50 kW
• Power: 2.90 kW
• Battery System: AP
• Recommended Battery: AP 500 S
• Weight of the device without battery: 4.4 kg
• Weight of the system without battery: 5.30 kg
• Guide length: 40 cm
• Groove width: 1.30 mm
• Chainsaw pitch: .325"
• Min. battery life AP 500 S: 20 min
• Max. battery life AP 500 S: 44 min
• Length of the device with claw buttress: 494 mm
• Sound Pressure Level: 96 dB(A)
• Sound power level: 104 dB(A)
• Vibration value left side: 2.6 m/s²
• Vibration value right side: 2.8 m/s²

Specifications