Indukcinis kaitintuvas SHERMAN INDI-1, 2 kVA, su ritinių rinkiniu

Trumpai apie prekę

Prekė: Indukcinis kaitintuvas SHERMAN INDI-1, 2 kVA, su ritinių rinkiniu. Kategorija: Sandarikliai.

• Gamintojas: Sherman
• Modelis: SHERMAN PODGRZEWACZ INDI 1
• Įtampa: 230 V

Remove the toughest, baked and corroded metal connections in seconds – completely without the use of open fire! The INDI-1 induction heater with maximum consumption power 2 kVA is an indispensable tool in professional car workshops, locksmiths and repair services. Operating at a safe induction frequency of 100 kHz, it instantly and point-wise warms up steel elements, allowing easy unscrewing of screws, bending pipes, straightening sheets or trouble-free removal of stickers and adhesives. The set includes up to 7 specialized heating coils (including flexible and sheet metal), which makes this device ready for any challenge!

Using traditional gas burners (propane-butane or acetylene) to loosen baked bolts and nuts carries a huge risk. Open fire destroys adjacent rubber, plastic, sealants, and also damages paint coatings. What’s more, working with an open flame near fuel lines or brake lines in a car is extremely dangerous.

The INDI-1 induction heater eliminates these risks by introducing flameless spot heating technology. The device uses the phenomenon of electromagnetic induction – it generates heat directly inside the heated metal. This makes the item (e.g. rusted nut) expands thermally in a fraction of a second, breaking off the corrosion bonds that block it, while the environment remains safe and cool. The device is powered from the standard 230V network, it is extremely handy and compact, and the long, 2-meter working cable provides impeccable comfort of maneuvering in tight corners of the chassis.

• Flameless and spot heating – maximum work safety without destroying adjacent plastic, rubber or varnish elements.
• High efficiency (2 kVA) – allows you to quickly reach the yield temperature and thermal expansion of metals.
• Rich package of 7 coils included – perfect adjustment of the tool diameter to a specific screw, pipe or flat surface.
• Innovative flexible coil – allows you to wrap the cable around unusual shapes, thick shafts or hard-to-reach rods.
• Low energy consumption at high efficiency – an advanced electronic system with a frequency of 100 kHz focuses the energy stream exactly where it is needed.

• Application versatility – ideal for loosening sealed joints, straightening local deformations of sheets and bending steel profiles.
• Single-phase power supply 230V – the possibility of trouble-free connection in any workshop, garage or service station with 16A protection.
• Ergonomic working handle – a lightweight handle combined with a 2-meter insert allows you to work comfortably under the car without hand fatigue.

• Car mechanics and suspension service technicians – for loosening crossover bolts, steering rods, exhaust system components or lambda probes.
• Blachars and varnishers – for precise local straightening of sheets, removal of emblems, mouldings and hard adhesive coatings.
• Installators and locksmiths – for precise bending of steel pipes and rods and installation and renovation works.
• Application:

  Unscrewing sealed, rusted bolts, nuts and pins

  Bending, straightening and forming of ferrous metals

  Removing stickers, films, sealants and adhesives

The INDI-1 induction heater is an investment that pays off quickly by drastically reducing the time needed to dismantle blocked suspension components or the engine. Forget about the cumbersome reaming of screws, destruction of threads and risky work with gas burners. Thanks to advanced components and optimal induction frequency, the device guarantees repeatable, precise and professional results. A complete set of different coils means that you do not have to buy expensive accessories separately – immediately after unpacking you take on every service challenge.

• Model: INDI-1
• Catalog number: 7811651
• Power supply voltage: AC 230 V / 50 Hz
• Maximum power consumption: 2 kVA
• Induction frequency: 100 kHz
• Work cycle: 15%
• Network security required: 16 A
• Handle cable length: 2 m
• Weight of the device: 7 kg
• Dimensions (D x SZ x W): 36,5 x 14 x 20 cm

• Induction heater INDI-1.
• Working cable with handle 2 m long.
• Straight heating coil 17 mm.
• Straight heating coil 20 mm.
• Straight heating coil 24 mm.
• Straight heating coil 28 mm.
• Flat coil 55 mm.
• Flexible coil (for pipes, rods and non-standard profiles).
• Round coil for spot heating and straightening of sheets.
• Original packaging.

🎁 In addition, you get

• Emphasis on safety – complete elimination of fire risks associated with traditional burners.
• Cleanliness and aesthetics – no sediment, soot and exhaust fumes during heating of elements.
• Workshop mobility – compact dimensions and a convenient handle make it easy to move the device directly to the repair station.

Q: How does the included flexible coil work?

A: A flexible coil is a specially insulated, flexible wire that can be wrapped around a non-standard shape element (e.g. thick pipe, swing arm or blocked shaft), in a place where standard wheel coils are too small or cannot be pushed. The number of turns determines the efficiency of heating – this allows you to perfectly match the magnetic field to the specifics of the task.

Q: Is the device suitable for heating aluminum or copper?

A: Induction heaters of this type are designed primarily for heating ferromagnetic materials, i.e. steel, iron and their alloys (which react sensationally to magnetic fields with a frequency of 100 kHz). Color metals, such as aluminum or copper, have a completely different structure and conductivity, which makes them heat up much weaker or require specialized, other heat treatment methods.

Q: What is the 55mm flat coil and round coil for sheet metal used for?

A: The flat coil is ideal for removing glued slats, emblems or softening old layers of glue under the upholstery or body elements – it heats the metal under the plastic layer, facilitating its trouble-free departure. In turn, the round coil for sheet metal is used for precise, spot heating of the vehicle plating, which is commonly used in flashing crafts to remove stresses and so-called. "pulling out" local deformations/dents.

induction heater indi-1 price shop allegro

2kva induction heater for rusted screws workshop

device for flameless heating of metals 230v

workshop induction indi1 number 7811651 opinions of mechanics

flexible flat coil for induction heater set

induction for unscrewing car exhaust swing arm screws

professional nut screw heater ean 5906372629489

portable induction heater for pipe bending sheets

Pneumatics and induction car service equipment

cheap and good induction heater with serial coils

Specifications