Indukcinis varžtų kaitintuvas 3 kVA, 230 V

Trumpai apie prekę

Prekė: Indukcinis varžtų kaitintuvas 3 kVA, 230 V. Kategorija: Oro šildytuvai.

• Gamintojas: Schwarz Werkzeuge
• Modelis: Schwarz Induktor 3000

☑ Heater included:

• ⭐ Schwarz Inducer 3000
• ⭐ Ergonomic Coil Holder
• ⭐ Power cord 230V
• ⭐ Coil set:

1. ➡ Side coils - 2pcs.
2. ➡ Flat coil - 1pcs.
3. ➡ Flexible coil (flex) - 1pcs.
4. ➡ Focusing coil - 1pcs.

• ⭐ Instruction manual in Polish

☑ Schwarz Induktor 3000 induction heater – a compact and efficient solution

• ➡ Schwarz Induktor 3000 is a professional induction heater with a power of 3kVA, with a voltage of 230 V.
• ➡ The device is ideal for unscrewing baked screws, removing stickers, dents and old paint coatings.
• ➡ Induction technology is a modern solution that eliminates the need for gas burners, ensuring fast, safe and precise heating of metal elements.
• ➡ Coils with copper windings guarantee even heat distribution.

☑ Technical data

• ⭐ Input voltage: 230V ±10% (50/60Hz)
• ⭐ Peak power: 3 kVA
• ⭐ Input current: max. 8 A
• ⭐ Power factor: 0,99 PFC
• ⭐ Operating time: 1,5 min heating / 1,5 min cooling
• ⭐ Degree of protection: IP20
• ⭐ Heater weight & handle: 3,96 kg
• ⭐ Total weight: 5,61kg
• ⭐ Production: European Union
• ⭐ Compliance with CE
• ⭐ Power cable: 126cm
• ⭐ Induction cable: 82cm

☑ Versatile use in workshops and services

➡ Schwarz Induktor 3000 uses electromagnetic induction for fast and spot heating of metal components.

• ⭐ Unscrewing of sealed bolts and nuts
• ⭐ Removing stickers, adhesives and putty
• ⭐ Rectifying dents in the body
• ⭐ Heating of sensors, pins, connectors
• ⭐ Application in hard-to-reach areas
• ⭐ Work without open fire – safe for varnish and elements

☑ Usage benefits

➡ The device eliminates the need for gas burners, which significantly increases comfort and work safety.

• ⭐ No open fire – less risk of fire and burns
• ⭐ No need to purchase and store gas cylinders – savings and convenience

➡ Schwarz Induktor 3000 works with a wide range of coils suitable for various applications. Thanks to the replaceable tips you can choose the right shape and diameter for a specific task.

☑ Schwarz Induktor 3000 step by step service

➡ The device is activated with the button on the handle – heating occurs only when holding it.

➡ Heating is done without contact – 3 to 5 mm of space between the coil and the material is enough.

• ⭐ Choose the right coil for the element
• ⭐ Connect to 230V socket and turn on the main switch
• ⭐ Heat for a maximum of 1,5 minutes, then wait 1,5 minutes for cooling
• ⭐ Move the coil during operation for even heating
• ⭐ After operation, leave the device to cool with the fan active for 6,5 minutes
• ⭐ Be careful – heated elements can cause burns

☑ Safety and durability of use

➡ The device is equipped with overload protection and cooling system activated automatically.

• ⭐ Temperature sensor with operating status indicator diodes
• ⭐ High resistance to overheating
• ⭐ Mandatory distance between coil and material: 3 to 5 mm

☑ Safety and LED signaling

➡ The LED signalling system informs the user about the state of the device:

• ⭐ Green – ready to work
• ⭐ Orange – work
• ⭐ Red (flashing) – overload
• ⭐ Red (solid) – overheating
• ⭐ White – work lighting
• ⭐ Red and white flashing – missing or damaged coil

☑ Convenience and ergonomics

➡ The device enables fast and trouble-free operation – just plug it into an outlet and start.

• ⭐ Short preparation time – no need to ignite and adjust the flame
• ⭐ Intuitive operation – ON/OFF button and fast heating response
• ⭐ Coils can be easily replaced – depending on the application

☑ Heater coils included:

1 Flat coil:

Purpose:

• ⭐ for removing slats, stickers
• ⭐ dismantling of glued body plating
• ⭐ replacement of windows

2 & 3 Spiral side coils:

Purpose:

• ⭐ bolts, nuts, bearings
• ⭐ bending of pipes and rods
• ⭐ unscrewing of sealed screws, pipes

4 Focal coil:

Purpose:

• ⭐ for precise, spot heating of metal
• ⭐ effective in hard-to-reach places (e.g. in the car)
• ⭐ ideal for heating sheets, bolts, nuts

5 Flexible coil:

Purpose:

• ⭐ for hard-to-reach places

Q&A - Frequently Asked Questions!

♦️ 1. What is the Schwarz Induktor 3000 used for?

• ✏️ It's a compact induction heater with a power of 3 kVA, designed for fast, precise metal heating: loosening seized bolts, removing stickers, straightening dents, or heating pins and bearings – without using an open flame.

♦️ 2. Can this device replace a gas torch?

• ✏️ Yes. The inductor allows you to eliminate the need for a gas torch – it doesn't require fire or gas cylinders, which significantly simplifies work and increases safety when dealing with temperature-sensitive components like paint or plastic.

♦️ 3. What power supply voltage is required?

• ✏️ 230 V AC ± 10% (50/60 Hz)

♦️ 4. How long can I heat continuously?

• ✏️ A maximum of 1.5 minutes of continuous heating, followed by a 1.5-minute cooling period (1:1 duty cycle). Following this rhythm extends the device's lifespan.

♦️ 5. What safety features protect the device and the user?

• ✏️ Temperature sensor with LED indicator (green – ready, orange – working, flashing red – overload, solid red – overheating)
• ✏️ Automatic cooling fan
• ✏️ Overload protection and an IP20 rated housing

✨ These mechanisms enhance work safety and protect the device from overheating.

♦️ 6. What are the practical benefits of using the inductor in a workshop?

• ✏️ The Schwarz Induktor 3000 saves time, reduces the risk of damage, and allows for precise work – it heats exactly where needed. Additionally:
• ✔️ it's lightweight and portable,
• ✔️ ready to use immediately after plugging in,
• ✔️ works with interchangeable coils for different tasks.

☑ Heater included:

• ⭐ Device Schwarz Induktor 3000
• ⭐ Ergonomic Coil Holder
• ⭐ Power cord 230V
• ⭐ Coil set:

1. ➡ Side coils - 2pcs.
2. ➡ Flat coil - 1pcs.
3. ➡ Flexible coil (flex) - 1pcs.
4. ➡ Focusing coil - 1pcs.

• ⭐ Instruction manual in Polish

Specifications