Įrankių rinkinys DeWalt, 3 vnt., su įkrovikliu, 2x5 Ah, 18V

Trumpai apie prekę

Prekė: Įrankių rinkinys DeWalt, 3 vnt., su įkrovikliu, 2x5 Ah, 18V. Kategorija: Universalūs įrankiai.

• Gamintojas: DeWalt
• Modelis: 5906516420040

COMBO DCG405/DCD796/DCH263

5906516420040

DEWALT COMBO KIT EQUIPMENT

• DCG405 Account Grinder
• Drill/driver DCD796
• Hammer Drill DCH263
• DCB1104 multifunction charger
• 2X 18V XR 5.0 Ah DCB184 Batteries
• TSTAKTM VI DWST1-7119

DSET03P2T2-040

DeWalt BRUSHLESS GRINDER DCG405

Usage Features:

• 18 V Brushless Motor
• Electronic brake quickly stops the disc when the switch is released
• Electronic clutch minimizes bounce if the disc is caught or locked
• Mesh covers prevent dust from being sucked in by the engine
• Rubber grips for better grip and comfort
• Two-position side handle for better comfort and control

Technical data:

• Power consumption: 1000 W
• No-load speed: 9000 rpm
• Max. Disc diameter: 125 mm
• Spindle Thread: M14
• Weight: 1.75 kg
• Length: 310 mm
• Vibration on shoulders - fine grinding: 4.4 m/s2
• Measurement uncertainty K 1 (vibration): 1.5 m/s2
• Vibration on shoulders-grinding: 2.5 m/s2
• Measurement uncertainty K 2 (vibration): 1.7 m/s2
• Sound pressure: 85 dB(A)
• Measurement uncertainty K 1 (noise): 3 dB(A)
• Sound pressure: 96 dB(A)
• Measurement uncertainty K 2 (noise): 3 dB(A)
• Battery Technology: Li-Ion
• Voltage: 18 V
• Battery Capacity: 5.0 Ah
• Usable power: 800 W

DeWalt DRILLING MACHINE DCD796

Usage Features:

• Compact drill/driver with impact XR 18 V
• Brushless motor construction technology for superior performance
• The lightweight, compact design allows you to work in tight spaces.
• Metal gears in 2-speed transmission increase working time and longer service life
• Drill-driver equipped with a stroke allows you to do more work
• 15 position torque adjustment allows for precise work in many materials
• Intelligent trigger allows you to maintain full control during operation
• 3-Position LED Flashlight, High/Medium/Low Settings with High 20-Minute LED Delay Illuminating Workplace
• Ergonomic rubberized handle increases user comfort
• Steel belt hook and strong magnetic bit grip for added convenience
• Innovative solutions in the XR lithium-ion series increase efficiency and expand application possibilities

Technical data:

• Battery Technology: XR Li-Ion
• Voltage: 18 V
• Battery capacity: not dot. Ah
• Max. Torque (hard): 70 Nm
• Max. torque (soft): 27 Nm
• Usable power: 460 W
• No-load speed: 0-550/2000 rpm
• Stroke frequency: 0-9350/34000 ud/min
• Drill chuck: 1.5-13 mm
• Max. drilling diameter [Wood]: 40 mm
• Max. drilling diameter [Metal]: 13 mm
• Max. drilling diameter [Wall]: 13 mm
• Weight: 1.3 kg
• Length: 190 mm
• Height: 203 mm
• Width: 67 mm
• Sound pressure: 89 dB(A)
• Measurement uncertainty K 3 (noise): 3 dB(A)
• Sound pressure: 100 dB(A)
• Measurement uncertainty K 2 (noise): 3 dB(A)
• Vibration - drilling in metal: < 2.5 m/s2
• Measurement uncertainty K 1 (vibration): 1.5 m/s2
• Vibration - drilling in concrete with impact: 11.5 m/s2
• Measurement uncertainty K 2 (vibration): 1.6 m/s2
• Vibration - indentation: < 2.5 m/s2
• Measurement uncertainty K 3 (vibration): 1.5 m/s2

DeWalt HAMMER DRILL DCH263

Usage Features:

• 18V battery power supply – greater maneuverability, independence and mobility than equivalents powered by a mains cable
• Brushless motor – higher revolutions, higher torque, longer working time and lower engine temperature, smaller dimensions and failure rate
• Drilling without impact – the ability to turn off the electropneumatic impact and drilling with the rotation itself allows you to make holes in wood, metal and ceramics
• Forging – the ability to stop rotations and leave the electropneumatic stroke alone allows you to make furrows in plasters and small demolition works of brick walls and forging tiles
• AVC and Perform & Protect system – low vibration level of 6,6m/s2 increases the safety and comfort of the tool and allows you to extend the continuous operation time of the operator
• Compatibility with the DWH205DH vacuum cleaner – hammer drill design adapted to work with a modern drilling site dust extraction system

Technical data:

• Power Type: Cordless
• Battery Cell Type: Lithium-Ion
• Stroke energy (according to. EPTA): 3.0J
• Maximum number of strokes: 0-4300ud. /min
• Rotation speed under load: 0-1165rpm /min
• Drill Chuck: SDS-Plus
• Max. Drilling diameter in concrete: 28mm
• Vibration during drilling with impact: 9.1m/s²
• Measuring uncertainty factor K: 1.5m/s²

Specifications