Įrankių rinkinys DEWALT 8 vnt., 18V, 5 x 5,0Ah

Trumpai apie prekę

Prekė: Įrankių rinkinys DEWALT 8 vnt., 18V, 5 x 5,0Ah. Kategorija: Elektrinių įrankių rinkiniai.

• Gamintojas: no brand
• Modelis: COMBO

.

FREE we add DT7969 bit set!!!

• Compact drill/driver XR 18 V
• Brushless motor construction technology for superior performance
• The lightweight, compact design allows you to work in tight spaces.
• Metal gears in 2-speed transmission increase working time and longer service life
• 15 position torque adjustment allows for precise work in many materials
• Switch design allows for full control during multiple jobs
• Improved ergonomic and rubberized handle improves work comfort
• The slip-on Li-Ion battery allows you to quickly attach and remove it from the tool. It has a charge indicator
• Clip to hang the device at the strap and magnetic holder for bits
• The tool belongs to the Li-Ion XR range of intelligent cordless tools designed to increase work efficiency, thanks to which you can complete any task faster

.

• Voltage: 18 V
• Max. Torque (hard): 70 Nm
• Max. torque (soft): 27 Nm
• Usable power: 460 W
• No-load speed: 0-550/2000 rpm
• Drill chuck: 1.5-13 mm
• Max. drilling diameter [Wood]: 40 mm
• Max. drilling diameter [Metal]: 13 mm
• Weight: 1.7 kg
• Length: 173 mm
• Height: 203 mm
• Sound pressure: 76 dB(A)
• Measurement uncertainty K 3 (noise): 3 dB(A)
• Sound pressure: 87 dB(A)
• Measurement uncertainty K 2 (noise): 3 dB(A)
• Vibration - drilling in metal: < 2.5 m/s2
• Measurement uncertainty K 1 (vibration): 1.5 m/s2
• Vibration - indentation: < 2.5 m/s2
• Measurement uncertainty K 2 (vibration): 1.5 m/s2
• Depth: 67 mm

• Brushless motor 18 V
• Electronic brake quickly stops the disc when the switch is released
• Electronic clutch minimizes bounce if the disc is caught or locked
• Mesh covers do not allow dust to be sucked in by the engine
• Rubber grips for better grip and comfort
• Two-position side handle for better comfort and control

.

• Voltage: 18 V
• Usable power: 800 W
• No-load speed: 9000 rpm
• Max. Disc diameter: 125 mm
• Spindle Thread: M14
• Weight: 1.75 kg
• Length: 310 mm
• Vibration on shoulders - fine grinding: 4.4 m/s2
• Measurement uncertainty K 1 (vibration): 1.5 m/s2
• Vibration on shoulders-grinding: 2.5 m/s2
• Measurement uncertainty K 2 (vibration): 1.7 m/s2
• Sound pressure: 85 dB(A)
• Measurement uncertainty K 1 (noise): 3 dB(A)
• Sound pressure: 96 dB(A)
• Measurement uncertainty K 2 (noise): 3 dB(A)

• The highest drilling speed in its category for more than 90 holes (10mm O x 80mm) on a single charge
• Stop rotation for light forging in plaster, ceramics or masonry and turn off impact for drilling in wood and metal
• High-performance brushless motor for extended runtime and reduced maintenance needs
• Electronic clutch for high torque and increased durability
• Perform & Protect system: the lowest vibration level in its class of 6,6 m/s2 increases the safety and comfort of the tool and allows for extended continuous operation time of the operator
• Bright LED light beam with delayed shutdown function has a positive effect on the visibility of the working field
• Perfect for drilling for anchors and fixing holes in concrete and brick with diameters from 4 mm to 24 mm
• Compact, lightweight and ergonomic design increases comfort and facilitates user work

.

• Handle: SDS-Plus
• Voltage: 18 V
• Usable power: 400 W
• Stroke energy (measured according to EPTA 05/2009): 2,1 J
• No-load speed: 0-1100 rpm
• Stroke frequency: 0-4600 ud/min
• Max. Wednesday drilling in concrete: 24 mm
• Max. drilling diameter [Wood]: 26 mm
• Max. drilling diameter [Metal]: 13 mm
• Weight: 2.5 kg
• Weight (with battery): PL N/A g
• Length: 301 mm
• Height: 202 mm
• Width: 85 mm
• Sound pressure: 86 dB(A)

• The robust motor with replaceable brushes, with adjustable speed, fan-cooled provides up to 3000 strokes per minute.
• The switch with smooth stroke frequency setting and on lock ensures the safety of the user.
• Tool-free tilting foot allows cutting at an angle of up to 45 degrees in both directions.
• Patented tool-free blade change system, adapted to T-type shanks.

.

• Number of jumps: 0-3000 /min
• Weight: 3,10 kg
• Max. thickness of wood: 135,00 mm
• Max. thickness of steel: 10,00 mm
• Battery Voltage: 18,00 V
• stroke size: 26,00 mm.

• foot covered with a material that does not damage the workpiece
• tip for connecting suction.

• High-power brushless motor with up to 205Nm torque ensures readiness for even the toughest jobs
• 3 Speed motor with high torque for full control of operation for precision
• Precision screwing mode gives you extra control to avoid damage to the material and fastener
• Lightweight and compact tool is convenient to use and allows you to work in tight spaces
• Light ring with three LEDs

.

• Voltage: 18 V
• Max. Torque: 205 Nm
• Compatible with Tool Connect: PL No
• Usable power: 400 W
• No-load speed: 0-1000, 0-2800, 0-3250 rpm
• Stroke frequency: 0 - 3800 ud/min
• Max. Screw Diameter: TBC
• Spindle tip: 6.35mm (1/4")
• Weight: 0.94 kg
• Length: 134 mm
• Height: 195 mm
• Vibration on hands/arms-stroke: 22 m/s2
• Measurement uncertainty K 1 (vibration): 2.1 m/s2
• Sound pressure: 96 dB(A)
• Measurement uncertainty K 1 (noise): 3 dB(A)
• Sound pressure: 107 dB(A)
• Measurement uncertainty K 2 (noise): 3 dB(A)

• Standard tool holder 1/2 inch with locking ring allows you to change attachments instantly.
• 4 tightening modes
• Adjusting the force with the trigger
• LED provides good visibility in insufficiently lit areas
• Anti-slip handle covered with rubber
• Equipped with a hitch for mounting the key on the belt
• Thanks to its small construction, the tool can be used in poorly accessible places
• Brushless motor that increases the durability of the device
• Speed control with the switch trigger increases control over the operation of the model.
• High torque ensures strong tightening of fasteners
• Precision Wrench mode reduces unscrewing speed for optimal operating conditions
• Thanks to the clamp holder, the replacement of the working element is efficient, thanks to which the operator saves working time

Specifications of DCF922N DeWALT:

• Supply Voltage: 18V
• Idle speed: 0-2000/min
• Stroke frequency: 0-3550/min
• Max. Torque: 406Nm
• Maximum breaking moment: 610Nm
• Handle: 1/2"
• Weight: 1,1kg

• Durable motor with replaceable brushes and fan cooled with adjustable speed provides up to 3700 rpm
• Ergonomic, rubberized handle for comfortable work
• Very durable construction with a foot made of magnesium casting allows very precise, repeatable cuts
• Intelligent switch provides excellent controllability for all applications
• Tool-free vertical deviation angle and cutting depth setting with easy-to-read graduation for maximum versatility in applications
• Switch with switch-on lock and electronic brake for good controllability and operational safety
• Very narrow disc kerf with 16 carbide teeth and a diameter of 165 mm enables efficient, precise cuts with a maximum depth of up to 55 mm

.

• Voltage: 18 V
• Usable power: 760 W
• No-load speed: 5150 rpm
• Disc diameter: 165 x 20 mm
• Max. angle of deviation from the vertical: 50 °
• Max. deep. cutting at 90°: 55 mm
• Max. deep. cuts at 45°: 42.1 mm
• Weight: 3.2 kg
• Length: 360 mm
• Height: 240 mm
• Vibration level on shoulders: < 2.5 m/s2
• Measurement uncertainty K 1 (vibration): 1.5 m/s2
• Sound pressure: 84 dB(A)
• Measurement uncertainty K 1 (noise): 3 dB(A)
• Sound pressure: 95 dB(A)
• Measurement uncertainty K 2 (noise): 3 dB(A)

Reciprocating saw made in the latest technology with brushless motor guaranteeing the highest operating parameters

Compact and lightweight housing for working in hard-to-reach areas

Ergonomic, rubberized handle provides comfort to the user

Improved balance and ease of use thanks to the central position of the engine

It has LED lighting for better visibility of the cutting line and the material being processed

Electronic speed control, quick-change lock-off blade holder and electronic motor brake ensure good working comfort and safety

Switch with smooth stroke frequency setting and switch-on lock ensures user safety

The saw is compatible with 18V 20V Li-Ion XR and 54V FLEXVOLT batteries

• Power Type: Battery
• Battery Type: Li-Ion 18V XR
• Engine Type: Brushless
• Maximum rotational speed: 0-2800 rpm /min
• Speed control: Yes (with switch)
• Saw blade stroke length: 16mm
• Saw blade type: Universal
• Maximum cutting depth in wood: 150mm
• Maximum cutting depth in pipe: 90mm
• Maximum cutting depth in plastic pipes: 90mm
• Lighting: Yes LED
• Overheating protection: Yes
• Overload protection: Yes
• Protection against complete discharge: Yes
• Length: 315mm
• Weight: 1,43kg (without battery)

• Screwdriver DCD796
• Jigsaw DCS331
• Hammer Drill DCH273
• Grinding machine DCG405
• Circular Saw DCS391
• Impact Driver DCF887
• DCF922 Impact Wrench
• Reciprocating saw DCS369
• 5x 5.0 Ah Li-Ion XR batteries
• 2x XR multi-voltage charger
• 3x capacious TSTAK trunks

Specifications