Keitiklis VICTRON PHOENIX 24V 375VA 700W 230V

Trumpai apie prekę

Prekė: Keitiklis VICTRON PHOENIX 24V 375VA 700W 230V. Kategorija: Įtampos keitikliai.

• Gamintojas: Victron energy

VICTRON ENERGY

PHOENIX VE DIRECT CONVERTER

24V 375VA 700W 230V

Phoenix battery inverters in this series are equipped with the VE.Direct communication port VE.Direct communication port of these inverters can be connected:

• Wired with your computer using the VE.Direct to USB communication cable.
• Wired with any Apple or Android smartphone or tablet that has a micro USB port using the VE.Direct to USB interface and a special adapter for this interface that allows it to be plugged into the micro USB port of your phone or tablet.
• Wirelessly with any smartphone, Apple and Android tablet or computer, e.g. macbook and other devices that have a BlueTooth interface using the VE.Direct Bluetooth Smart dongle interface.

After connecting in the inverter, we can fully configure:

• The voltage level at which the alarm of too low voltage will be activated and the voltage level at which the alarm of too low voltage will be deleted.
• The voltage level at which the inverter will be switched off as a result of too low voltage and the voltage level at which the inverter will be restarted/re-enabled.
• Output voltage in the range: 210 - 245V.
• Output frequency 50Hz or 60Hz.
• Turn ECO mode on or off and set sensitivity levels in EC mode.

We can monitor the following inverter parameters on an ongoing basis:

• Input and output voltage levels
• Output current
• Output power
• Current alarms

High starting power

Essential for loads such as converter for LED lamps, halogen lamps or electrical appliances.

ECO modeIn ECO mode, the inverter will switch to standby mode when the load falls below the set value. In standby mode, the inverter turns on for a while (programmable, by default every 2,5 seconds. ). If the load exceeds the set level, the inverter will remain on.

Remote on/off

The remote switch can be connected to a two-pole connector, or between the positive pole of the battery and the connector on the right side of the two-pole connector.

Load transfer to another AC source: automatic transfer switching

For our low power inverters, we suggest our Filax Automatic Transfer Switch. Filax has an ultra-fast switch (less than 20ms), so your computer or other electronic device will work continuously while switching.

Confirmed reliability

Bridging plus toroidal transformer topology have proven their reliability for many years. Inverters have short-circuit protection, against overheating, both due to overload and high ambient temperature.Additional power during start-up. SinusMax – better technology.

A unique feature of SinusMax technology is very high initial power. Conventional technologies do not offer such extreme performance. Phoenix inverters are perfect for powering devices with very high loads, such as refrigeration compressors or electric motors.

In order to transfer the load to another power source, use an automatic power source switch (Automatic Transfer Switch). For low-power Phoenix inverters, it is recommended to use the Filax Automatic Transfer Switch. This device allows you to switch the inverter to another power source (in less than 20 milliseconds) without interruptions in power supply. For sensitive devices such as computers or other electronic equipment, the short switching time ensures interference-free operation.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Effective power	375 W
Parametry	Product weight with unit packaging	3 kg
Parametry	Brand	Victron energy
Parametry	EAN (GTIN)	8719076034063