Kryžminis lazerinis nivelyras YATO YT-30436, žalias, 12 linijų, 3D

Trumpai apie prekę

Prekė: Kryžminis lazerinis nivelyras YATO YT-30436, žalias, 12 linijų, 3D. Kategorija: Lazeriniai gulsčiukai.

• Gamintojas: Yato
• Modelis: YT-30436
• Ilgis: 360 cm
• Svoris: 0.45 kg

YATO YT-30436

Green laser with excellent line visibility. Necessary during finishing works, e.g. when checking the level of floors, suspending ceilings, as well as the construction of partitions.

The projection of several lines at the same time facilitates and accelerates the achievement of perfect and even planes - oriented vertically and at right angles to each other.

Characteristics:

• self-leveling in the range of ±3° and a lock to work at the slope, useful e.g. for determining falls on driveways
• green laser beam is easier to see, especially in strong sunlight than red radius
• IP54 protection class provides adequate protection in working conditions
• power supply: 3,7 V Li-Ion battery

Watch the product video on YouTube:

https://youtu.be/Szy7IijlT2U

Parameters:

• Rated voltage [V d.c.]: 3,7
• Power supply: Li-ION 5200 mAh
• Laser accuracy [mm/m]: ±3 / 10
• Scope of self-regulation [st.]: ±4
• Degree of protection: IP54
• Operating temperature range [st. C]: -10 ~ +50
• Maximum working time [h]: 8
• Tripod thread size: 1/4-20 UNC (6,35 mm)
• Laser class: 2
• Wavelength [nm]: 510 - 530
• Laser power [mW]: ? 1
• Weight (without battery) [kg]: 0,45

Included:

• laser
• handle
• bag with belt

Easy operation

Pressing the switch activates the device regardless of the lock position. If the lock is moved towards the closed padlock symbol, the device will start in manual mode. If the lock is moved towards the open padlock symbol, the device will start in the self-leveling mode of the laser pointer.

The switch presses allow you to change the displayed laser rays. The default setting is to display one horizontal omnidirectional laser and two vertical omnidirectional lasers. Subsequent presses of the switch activate the following types of lighting:

• one horizontal omnidirectional laser;
• one vertical omnidirectional laser;
• one horizontal omnidirectional laser and one vertical omnidirectional laser
• two vertical omnidirectional lasers

Self-leveling laser pointer

Setting the lock on the open padlock symbol will trigger the self-leveling mechanism in the laser pointer.

If the product is tilted at an angle within the self-adjustment range, the displayed lines will be automatically leveled.

If the displayed lines pulsate, it means that the product is tilted by an angle greater than the adjustment range and in this case self-leveling will not be possible. You need to change the position so that the displayed lines stop pulsing.

Manual mode

Manual mode is useful when the device needs to be tilted. In manual mode, the laser beam is emitted with the self-adjustment mechanism locked, the lock should be moved to the resistance towards the closed padlock symbol. In this mode, the accuracy is not maintained and the laser beam will pulsate every 5 seconds.

Pulse mode

pulse modes are used to work with laser radiation detectors and are particularly useful when working outdoors or in very brightly lit rooms.

After starting the device, press the switch to go to the following pulse modes:

• continuous pulse mode
• external pulsed mode

Mount on a tripod or on the included holder

The base of the product is equipped with a threaded hole, which allows the product to be mounted on a tripod (available separately) or in the holder provided with the product.

The holder attachment is equipped with magnets that can be attached to ferromagnetic surfaces.

Specifications