Kryžminis lazeris BOSCH GLL 20-22 G

Trumpai apie prekę

Prekė: Kryžminis lazeris BOSCH GLL 20-22 G. Kategorija: Lazeriniai gulsčiukai.

• Gamintojas: Bosch
• Modelis: 0601065600

The equipment of the offered laser includes:

• Protective cover for laser
• set of power batteries for laser
• laser target
• magnetic handle LB 10 BOSCH

Technical parameters:

• Number of laser beams: 2 lines (cross 90º)
• Display method: 1 horizontal, 1 vertical, 2 simultaneously
• Leveling method: automatic self-leveling (pendulum)
• Leveling accuracy: 0,3 mm / m
• Self-leveling range: +/- 4°
• Self-leveling time: up to 4 seconds
• Laser type: 540nm, < 10 mW
• Line display angle: horizontal line = 120° / vertical line = 140°
• Working range: 20 m
• Degree of protection against dust and water: IP65
• Operating temperature: -10 °C to +50 °C
• Tripod Mount Connector: Direct 1/4”
• Power supply: 4 x 1,5VLR6 (AA) batteries
• Working time on 1 battery pack: up to 6 hours
• Device weight: 0,56 kg (incl. batteries)
• Dimensions: 129 × 68 × 116 mm

Professional cross laser GLL 20-22 G from BOSCH designed for fast, easy and most importantly, very precise determination of horizontal, vertical, cross lines (two perpendicular lines) and lines under the bevel.

Four times better visibility thanks to green laser lines.

The GLL 20-22 G cross laser from BOSCH is equipped with green laser lines, which allow for even greater highlighting of the displayed laser lines. Traditional red laser lines are much less visible in places with high sunlight. The new GLL 20-22 G significantly increases the comfort of work with laser levels.

Precisely defined horizontal, vertical, cross and bevel lines.

Cross laser GLL 20-22 G from BOSCH is designed for fast, easy and most importantly, very precise determination of horizontal, vertical, cross lines (two perpendicular lines) and lines under the bevel.

Large working range, high accuracy and speed of work.

Thanks to the use of a new generation of laser transducer, the laser beam is visible at a distance of up to 20 meters, and the high-speed auto-leveling system (automatic leveling) allows you to draw lines in just 4 seconds with very high accuracy – 0,3mm / m, i.e. at 10 meters the error will not exceed the value of 3mm.

Easy and instinctive operation.

Easy operation with the touch of a button means that the laser can be operated by virtually any person. With the work that had to be done so far with a conventional level, the weight and cable can now be done with a single device. Precise, horizontal and vertical laser lines can be projected from the floor to the walls or to the ceiling, together or separately, so that the user can perform many work related to leveling or leveling.

Built-in OUT OF LEVEL function.

The accuracy of work is guaranteed by the built-in function – OUT OF LEVEL, which means that with the help of flashing laser beams, the laser indicates any deviation from the level or vertical that exceeds the possibilities of self-leveling (4 degrees).

Built-in AUTOMATIC CIRCUIT BREAKER function.

The GLL 20-22 G laser is equipped with an automatic circuit breaker system, which greatly reduces the rate of battery consumption. This function means that after 120 minutes of operation, the laser will automatically turn off.

Built-in LOW BATTERIES function.

The GLL 20-22 G cross laser from BOSCH is equipped with a battery consumption indicator, thanks to which the user knows at what point the batteries should be replaced.

Pendulum locking function.

If the user needs to display diagonal lines, for example, when painting the wall at the stairs with two colors, then using the pendulum lock function, he can manually set the desired angle. This mode of operation is indicated by slow flickering of laser lines.

Large angle of display of laser beams.

The GLL 20-22 G cross laser has a very large laser beam display angle, which is 120 degrees horizontally and 140 degrees vertically, so we can easily project lines from floor to ceiling.

Resistant to all kinds of damage.

The GLL 20-22 G cross laser is equipped with a durable and very resistant to damage housing, which has been practically completely covered with soft Softgrip material, thanks to which the laser is resistant to dust and splashing water and to difficult conditions on the construction site, and thanks to the pendulum lock, the laser is protected against shocks during transport.

Dual Power Source.

The feature allows the replacement of the BA 3.7V 3.0Ah XL lithium-ion battery and AA alkaline batteries, which helps eliminate downtime.

Assortment of accessories included with the laser:

Protective cover - made of durable and resistant to damage material, allows for safe transport and storage of the device.

Magnetic stand LB 10 BOSCH - is a special tripod equipped with built-in strong magnets, thanks to which the tripod can be attached (attached) to any steel structure or metal frame. In addition, it has a hole for hanging a tripod, e.g. on a nail.

Aiming shield - is used to locate laser beams emitted by the laser, has a folding support that allows you to position the shield in an upright position.

Power battery set - 4 R6 batteries are supplied in the offered set to power the laser. A set of new batteries allows for more than 12 hours of continuous laser operation.

Delivery includes:

• Cross laser from BOSCH
• Protective cover for laser
• Magnetic tripod LB 10
• Laser targeting disc
• Set of power batteries for laser
• Instruction in Polish

Specifications