Laistymo juostos rinkinys 100 m su 150 priedų, lašelinė drėkinimo sistema

Trumpai apie prekę

Prekė: Laistymo juostos rinkinys 100 m su 150 priedų, lašelinė drėkinimo sistema. Kategorija: Laistymo juostos.

• Gamintojas: Water-Close
• Modelis: 20-691038Z2
• Ilgis: 100 m

WaterCLOSE dropping line without pressure compensation included with accessories

✅ Brand - WaterCLOSE.

✅ Production - Poland.

✅ Line Diameter - 16 mm.

✅ Line Length - 100 m

✅ Type of dripper without pressure compensation

✅ Water expenditure - 2,0 l/h per emitter.

✅ Spacing of Droppers 33 cm.

✅ Set contains 150 accessories

✳ SET INCLUDES ✳

⭐ drip line 16mm 100m long with dripper every 33cm with water expenditure 2l/h from emitter

⭐ 100 line anchor pins

⭐ 7 connectors - connectors

⭐ 7 tees

⭐ 7 elbows

⭐ 7 cleats

⭐ 20 clips

⭐ 1 valve 3/4" external thread

⭐ 1 garden connector 3/4" internal thread

The multi-season drip line is made of materials with the addition of a stabilizer to protect against UV rays, which increases its service life. We use the highest quality polyethylene raw material for the production of the line. The line is very easy to assemble and meets the optimal needs of crops, ensuring the best conditions for plant growth. Drip lines are used for irrigation of gardens, fields, orchards, nurseries, greenhouses and foil tunnels. The advantages of the line include rational dosage of water in the area of the root system, versatility, as it can be spread loosely, slightly covered with soil or suspended, and the ability to water crops regardless of the time of day.

✳ PINS - 100 PIECES ✳

Pins designed for fixing 16mm drip lines, made of durable material resistant to external UV factors.

Total length of the pin 16 cm, wide handle pins ensure stable holding of drip wires.

✳ PUSH-IN KNEE - 7 PIECES ✳

The knee is used to connect drip line or 16mm PE pipes in irrigation systems to achieve an angle of 90º

Pressed knee made of high quality plastic resistant to UV radiation

✳ PUSH-IN TEE - 7 PIECES ✳

Press-in tee is used to connect drip line or 16mm PE pipes in irrigation systems to branch the irrigation line

Press-in tee made of high quality UV-resistant plastic

✳️ Push-in Plug - 7 Pcs. ✳️

This plug is used to permanently or temporarily seal the end of a drip line section.

The push-in plug is made of high-quality, UV-resistant plastic.

✳ PUSH-IN FITTING - 7 PIECES ✳

Press connector is used to connect or repair mechanically damaged drip line or 16mm PE pipes in irrigation systems

Press connector made of high quality plastic resistant to UV radiation

✳ CRIMP CLIP - 20 PIECES ✳

Clamp clips are used to protect drip line connections from popping out or to seal leaks on push-in fittings

Press-in clip made of high quality UV-resistant plastic

✳ CONNECTION SET LINE - HOSE ✳

The connection set between the drip line and the garden hose, in the set includes:

Valve line - 3/4" GZ external thread , pressed into the line 16mm

Garden connector 3/4” - fits sprinklers, guns and many other gardening equipment used per click.

Specifications