Laistymo lašelinė sistema, 100 m, XL, su 100 priedų

Trumpai apie prekę

Prekė: Laistymo lašelinė sistema, 100 m, XL, su 100 priedų. Kategorija: Laistymo juostos.

• Gamintojas: Water-Close
• Modelis: 20-691038Z4
• Ilgis: 100 m

WaterCLOSE dropping line without pressure compensation included with accessories

✅ Brand - WaterCLOSE.

✅ Production - Poland.

✅ Line Diameter - 16 mm.

✅ Line Length - 100 m

✅ Type of dripper without pressure compensation

✅ Water expenditure - 2,0 l/h per emitter.

✅ Spacing of Droppers 33 cm.

✅ Set contains 100 accessories

✳ SET INCLUDES ✳

⭐ drip line 16mm 100m long with dripper every 33cm with water expenditure 2l/h from emitter

⭐ 50 line anchor pins

⭐ 7 connectors - connectors

⭐ 7 tees

⭐ 7 elbows

⭐ 7 cleats

⭐ 20 clips

⭐ 1 valve 3/4" external thread

⭐ 1 garden connector 3/4" internal thread

The multi-season drip line is made of materials with the addition of a stabilizer to protect against UV rays, which increases its service life. We use the highest quality polyethylene raw material for the production of the line. The line is very easy to assemble and meets the optimal needs of crops, ensuring the best conditions for plant growth. Drip lines are used for irrigation of gardens, fields, orchards, nurseries, greenhouses and foil tunnels. The advantages of the line include rational dosage of water in the area of the root system, versatility, as it can be spread loosely, slightly covered with soil or suspended, and the ability to water crops regardless of the time of day.

✳ PINS - 50 PIECES ✳

Pins designed for fixing 16mm drip lines, made of durable material resistant to external UV factors.

Total length of the pin 16 cm, wide handle pins ensure stable holding of drip wires.

✳ PUSH-IN KNEE - 7 PIECES ✳

The knee is used to connect drip line or 16mm PE pipes in irrigation systems to achieve an angle of 90º

Pressed knee made of high quality plastic resistant to UV radiation

✳ PUSH-IN TEE - 7 PIECES ✳

Press-in tee is used to connect drip line or 16mm PE pipes in irrigation systems to branch the irrigation line

Press-in tee made of high quality UV-resistant plastic

✳ PUSH-IN STOPPER - 7 PCS. ✳

The cork is used to permanently or temporarily blind the tip of the drip line section

Press-in cork made of high quality UV-resistant plastic

✳ PUSH-IN FITTING - 7 PIECES ✳

Press connector is used to connect or repair mechanically damaged drip line or 16mm PE pipes in irrigation systems

Press-in connector made of high quality UV-resistant plastic

✳ CRIMP CLIP - 20 PIECES ✳

Clamp clips are used to protect drip line connections from popping out or to seal leaks on push-in fittings

Press-in clip made of high quality UV-resistant plastic

✳ CONNECTION SET LINE - HOSE ✳

Connection set between drip line and garden hose, in the set includes:

Valve line - 3/4" GZ external thread , pressed into the line 16mm

Garden connector 3/4” - fits sprinklers, guns and many other gardening equipment used per click.

Specifications