Langų valymo robotas su vandens purškimu, valdomas Tuya programėle ir balso komandomis

Trumpai apie prekę

Prekė: Langų valymo robotas su vandens purškimu, valdomas Tuya programėle ir balso komandomis. Kategorija: Grindų valymo robotai.

• Gamintojas: no brand
• Modelis: RL4136
• Galia: 72 W

PAYMENT ON DELIVERY is not supported. Please make the payment online.

1) Water spray mode

1. Cleaning modeDeep mode Z mode N mode

Select the three cleaning mode on the remote control to completely clear the window.Window cleaning robot set two water holes, when the robot to the left cleaning, the left side spray water, when

the robot to the right cleaning, the right side spray water.when the robot to the down cleaning the down side spray water.

2). Cleaning mode:Deep mode; Z mode; N mode

Select the three cleaning mode on the remote control to completely clear the window.

3) Fixed-point cleaning mode

A. Press the upper, lower, left and right direction keys on the remote control to move the machine to the key cleaning position.

B. Press the OK key on the remote control for 2 seconds to enter the fixed point cleaning.

4) Power-off protection (UPS) function

A. In case of power failure, the device will start the built-in backup battery power, which can last for 40 minutes (when the battery is fully charged).

B. In case of power failure, the window cleaning robot will stay in the same place and will not move forward, and will give a warning sound and the red / blue lights will flash alternately. At this time, the user should withdraw the machine as soon as possible to avoid falling down due to power off.

C. The safety rope can be used to gently pull back the device; when pulling the safety rope, it should be close to the glass as far as possible to avoid falling

5) Cleaning completed

A. After the robot is cleaned, it will stop at the starting point, hold the handle tightly, press and hold the "Start "button for 3 seconds, the fan will stop working, and remove the host.

B. Unfasten the safety rope and buckle.

C. Disconnect power.

6) Remote controlCleaning completed

A. After the robot is cleaned, it will stop at the starting point, hold the handle tightly, press and hold the " "button for 3 seconds, the fan will stop working, and remove the host.

B. Unfasten the safety rope and buckle.

C. Disconnect power.

A. Do not charge the remote control battery, do not disassemble the battery, do not put the battery in fire, there is a possibility of detonation.

B. Please use No. , AAA/RL batteries of the same specification as required, please do not use different types of batteries, there is a danger of burning the circuit, when the battery is installed and removed, push the remote control cover down, open the battery cover, and install .When using the battery, align the negative pole with one end of the spring first, press it down, the reverse installation of the battery is invalid, and then cover the battery cover.

C. New and old batteries or different models, different types of batteries cannot be mixed.

7) Voice assistance function

8) Tuya App Operation Guide

Very Importent！

Thank you for your purchase! After the goods are dispatched, you will receive the tracking number. Please pay attention to receiving the package. When you are satisfied with the goods, don't forget to click 'Confirm Delivery' in your Allegro account. This will help me receive the payment faster. Thank you very much for your support! Wish you a happy life!

Specifications