Lazerinis nivelyras su magnetais MC-1D, valdymo sistema

Trumpai apie prekę

Prekė: Lazerinis nivelyras su magnetais MC-1D, valdymo sistema. Kategorija: Detektoriai.

• Gamintojas: Nivel System
• Modelis: MC-1D

• Universal solution for many types of machines (bulldozers, excavators, backhoe loaders)
• Faster operation, higher efficiency – the machine can do more at the same time
• Increased accuracy of work – no digging
• Savings on material resulting from more accurate surface alignment
• The easiest solution for controlling machine operation – simple, intuitive operation

Control machine operation, work faster, more accurately and more economically

When performing earthworks with machines, there is a problem associated with leveling. So far, additional people for measurements (or surveying teams) have been involved in this process. Constructions implementing such methods are often expensive, long-lasting and require specialization and high accuracy. Can it be done more simply, accurately and faster? Adjust the height and slope of the machine in real time with the help of a modern laser sensor.

MC-1D is a leveling system that allows you to control the height of the working element of the machine from the operator's cabin. In this way, the operator has a constant view of the height of the bucket or blade of the machine relative to the assumed reference line (designated by the laser leveler). Observing the indications on the machine sensor (or display in the cabin), the operator obtains information whether he can still collect material / dig – whether he is already at the assumed depth, thus eliminating cavities, digging.

The system consists of a laser sensor that receives a signal from the laser leveler and uses LED indicators to inform the operator about the current height at which the working element is to be set (spoon, blade). This information will also appear on the cabin receiver (RD-1MC), which performs the functions of the display. The set configured in this way allows you to quickly and efficiently carry out earthworks, also with a decrease – without the need for control measurements.

• Universal solution for many types of machines (bulldozers, excavators, backhoe loaders)
• Faster operation, higher efficiency – the machine can do more at the same time
• Increased accuracy of work
• Savings on material resulting from more accurate surface alignment
• The simplest solution for controlling machine operation – simple, intuitive operation
• Simple and quick installation – installation / disassembly of sensors from the machine, the possibility of easy transfer to another machine
• No corrections, no digging – less risk of human error
• Time saving – less indirect measurements, limiting the number of inspections during operation (work can be controlled on an ongoing basis without leaving the cabin)
• Operator cab control – signal transmission to the cab display (MC-RD1)

Measuring solution – Nivel System MC-1D

This process can be automated, simplified and shortened using laser technology, which facilitates and accelerates work at every stage. In this solution, the laser electronic system, thanks to the sensor installed on the excavator arm, can control the height and drop of the trench Work is more accurate and faster. The Nivel System MC-1D is a ready-made mobile set, assembly is not a problem and can be carried out by the machine operator immediately before the leveling begins, and after work the elements can be hidden in the suitcase.

The MC-1D laser sensor is attached to the machine via strong magnets. The bright and easy-to-read LED (LED) display on the sensor tells the operator whether to lower or raise the spoon at any given time. In addition, the MC-1D has the ability to transmit via the signal cable to the MC-RC1 receiver, and this (performing the functions of the display in the cabin) informs the operator about the current setting of the bucket, blade – this is important when the operating condition prevents the operator from observing the MC-1D sensor. If the desired drop is set on the leveler, the operator can realize it based on the sensor indications, without measurements, without conversion and without the risk of error – and above all much faster!

The MC-1D Clamps system works with red beam laser levelers, allowing precise determination of planes with a drop without the need to rearrange the laser. In Nivel System, the operator can change settings remotely using the remote control.

Nivel System laser technology works well at all stages of earthworks – from ground leveling to paving. The MC-1D sensor on the excavator increases the precision of excavations, eliminating digging. The laser system reduces uptime by at least half, reduces labor costs and saves materials, making it cost-effective even for smaller businesses.

How does the Nivel System MC-1D laser system work?

The leveler emits a laser beam invisible to the eye, received by the MC-1D sensor. Beam, spinning around a vertical or inclined axis at a speed of several hundred rpm. /min., forms a horizontal or inclined plane, in one or two directions. This plane (which can be precisely positioned on the laser control panel) provides a reference plane for the sensor installed on the machine. The operator, digging, observes the indications of colored diodes on the sensors. They show the current position of the spoon relative to the reference plane and give simple messages: “Leave the spoon or blade”, “Pick up the spoon or blade”, “Keep it up”. This information is also presented in the operator’s cabin via the Nivel System MC-RC1 receiver.

• Operating mode: accurate (±10mm), rough (±20mm)
• Beam reception range: 25 cm, 360°
• Beam Type: Laser (Red)
• Fastening: for magnets
• Battery: 7,2V NiMh (2500mAh)
• Working time: 40 hours
• Charging time: 15 hours.
• Operating Temperatures: -20ºC ~ +50ºC
• Resistance Class: IP 54
• Dimensions: 280 x 280 x 130 mm
• Weight: 5,5 kg

• MC-1D – machine sensor with built-in battery – 1 pc.
• MC-RC1 – cabin display – 1 pc.
• cable connecting the sensor to the cabin display – 1 pc.
• cable for connecting power from a 12V/24V battery (clamps) – 1 pc.
• charger – 1 pc.
• Transport case – 1 pc.

Specifications