LED juostelė su judesio jutikliu, 3 m, maitinama baterijomis ir USB, baldams ir po lova

Trumpai apie prekę

Prekė: LED juostelė su judesio jutikliu, 3 m, maitinama baterijomis ir USB, baldams ir po lova. Kategorija: Rinkiniai.

• Gamintojas: no brand
• Modelis: Taśma LED czujnik ruchu 3m V6

The tape is available in two versions:

• white warm (about 4300K)
• white cold (about 6000K)

LED strip with motion and dusk sensor is ideal for lighting hard-to-reach places or those to which electricity supply is problematic or even impossible. Perfectly works for highlighting cabinets, shelves, furniture, etc.

Thanks to the built-in motion and dusk sensor, the tape can also be mounted in the hallway, in the toilet, as a highlighting of the bed or wardrobes.

The tape is applied to the degreased surface using two-sided tape, which is covered from the bottom. There is a possibility of shortening the tape in the designated places on the tape - every one diode.

LED tape with motion and dusk sensor is a sensational solution for use in cabinets and furniture. Thanks to the included sensor, when you open the cabinet, its interior will be automatically illuminated. It remains on as long as the motion sensor detects movement in the room. Ideally suited for bedside, hallway, stairs, toilet, mirrors, furniture, cabinets or under them. The sensor provides convenience, safety and energy savings.

CMotion sensor included in the set detects movement at a distance of 4 meters at an angle of 140°. The tape works in 3 modes: continuous, automatic night mode and automatic day and night mode.

The automatic lighting mode has a wide range of settings from 15 seconds to 5min of lighting. The product is battery powered (4xAAA), making it safe to use.

The tape and sensor are mounted using double-sided tape, which are covered from the bottom. The tape can be shortened every 1 diode, i.e. approx. 1,7cm.

LED strip has 3 operating modes:

• CONTINUOUS MODE – On/Off switch – lights all the time
• NIGHT MODE - setting the switch in this position activates the on/off of the LED strip as a result of detecting movement by the sensor only at night in a darkened room. The light sensor automatically recognizes day and night, so it only turns on in a dark room. Does not react during the day and with the light on.
• DAY AND NIGHT MODE - setting the switch in this position activates the on/off of the LED strip as a result of detecting movement by the sensor around the clock regardless of the intensity of light in the room

A wide timer range of 15 seconds to 5 minutes will allow you to set the ideal time for which the lighting is to be turned on.

LED STRIP parameters:

• Length: 300cm
• Color: white warm or cold
• Width: 8mm
• Waterproof coated with silicone
• Double-sided tape on the bottom

PYR MOTION SENSOR parameters:

• Detection angle: 140°
• Motion detection range: up to 4m
• Dimensions: 15x3,7x1,5cm
• TIMER: 15 seconds – 5 minutes

Specifications