Litavimo lituoklis NAC 60W, 490°C

Trumpai apie prekę

Prekė: Litavimo lituoklis NAC 60W, 490°C. Kategorija: Lituokliai.

• Gamintojas: NAC
• Modelis: HS-060-RB
• Galia: 60 W
• Įtampa: 240 V

⚙ TECHNICAL PARAMETERS

• Power supply: 230 – 240 V / 50 Hz
• Rated Power: 60 W
• Maximum operating temperature: ok. 490°C
• Heat-up time: 3 to 5 minutes
• Grot: made of durable alloy
• Heater cover: stainless steel
• Handle: temperature resistant plastic with ergonomic profiling
• Power cable length: 1,3 m
• Protection class: I (requires socket with ground pin)
• Protection rating: IP20 (for indoor use)

‼ IMPORTANT TIPS ‼

The tool is used for soft soldering using tin and fluxes. The tip of the soldering iron must under no circumstances be sanded with a file or sandpaper - this will wipe off the factory protective layer of the alloy and lead to a quick burnout of the tip. The heated device should only be placed on a metal stand.

✴ CONTENTS OF THE SET ✴

⚫ NAC HS-060-RB flask soldering iron with 1,3m power cable

⚫ Metal stand for putting away a hot soldering iron

⚫ User manual in Polish and warranty card

✅POWER 60W ✅STAINLESS STEEL HEATER ✅TEMPERATURE490°C ✅SOLID TIP

Brazing broken wires, repairing small electronics or creating your own circuits require specific and reliable equipment. By choosing the NAC model, you shorten the waiting time for heating and gain full control over the binder. The work runs smoothly, and the result is strong solder connections and satisfaction with self-made repair👏

🎯Key benefits that you will feel right away:

🔴 Power 60 W and temperature up to 490°C: allows for quick heating of joined elements with a larger cross-section, thanks to which tin melts well and creates a certain connection.

🔴 Ready to work in 3 to 5 minutes: the heater efficiently reaches the operating temperature without losing heat when in contact with a thicker cable.

🔴 Stainless steel cover: the heater body is resistant to corrosion, oxidation and mechanical damage.

🔴 Durable alloy tip: The factory tip made of special alloy is more slowly worn out and oxidized under the influence of high temperature.

🔴 Comfortable grip: the handle is made of high temperature resistant plastic, fits securely in the hand and insulates well from the heat of the working heater.

🔴 Stand included: The included profiled plate allows you to safely put away the heated flask during breaks at work, protecting the table top from burning.

🔴Efficient heater

🔻 The heart of this soldering iron is an efficient heating element with a power of 60 W powered by a standard voltage of 230-240 V. This configuration allows for a quick start with any project. The heating time is only 3 to 5 minutes, dso you don't waste time waiting for the equipment to run ready.

🔻 The maximum operating temperature is 490°C. A sufficiently high heat value guarantees trouble-free melting of the solder binder and deep, even coverage of the combined surfaces. The heater cover is made of stainless steel, which perfectly withstands harsh working conditions and prevents oxidation processes.

🔴Comfort and ergonomics

🔻 A secure grip is the basis for safety and precision when soldering small components. The handle of the NAC HS-060-RB is equipped with a special soft cover. This material not only prevents the tool from slipping out of your hand, but is also highly resistant to mechanical damage and high temperatures.

🔻 The total length of the power cable is 1,3 meters. This ensures optimal freedom of movement at the worktop without excessively tangled coils of the cable. Lightweight and balanced design allows you to work longer on electronic circuits without excessive wrist fatigue.

🔴Precision of joints

🔻 The device has been designed strictly to create solid joints by soft soldering using the appropriate binder. Grot is a key element responsible for transferring heat to the detail. This device is made of a special alloy that effectively prevents the tip from wearing out and burning out quickly.

🔻 Properly contoured blade shape makes it easier to reach printed circuit boards or when repairing electrical installations. This equipment is a proven solution during minor home repairs, routine renovation works and advanced hobby projects.

⭐ Expert tip

To make the tip last as long as possible, after each heating and before putting down the soldering iron, clean it with a damp solder sponge or brass chip cleaner, and then whiten with fresh tin. A thin layer of molten binder protects the tip from oxidation in contact with air.

❇ What will it work best for?

➡ Soldering and repair of electrical harnesses, speaker cables and installations in the car.

➡ Connecting connectors, thick contacts, switches and sockets.

➡ Minor repairs of household appliances, toys and workshop equipment.

➡ Modelling, DIY and joining elements made of copper or brass.

✴ CONTENTS OF THE SET ✴

⚫ NAC HS-060-RB flask soldering iron with 1,3m power cable

⚫ Metal stand for putting away a hot soldering iron

⚫ User manual in Polish and warranty card

⚙ TECHNICAL PARAMETERS

• Power supply: 230 – 240 V / 50 Hz
• Rated Power: 60 W
• Maximum operating temperature: ok. 490°C
• Heat-up time: 3 to 5 minutes
• Grot: made of durable alloy
• Heater cover: stainless steel
• Handle: temperature resistant plastic with ergonomic profiling
• Power cable length: 1,3 m
• Protection class: I (requires socket with ground pin)
• Protection rating: IP20 (for indoor use)

‼ IMPORTANT TIPS ‼

The tool is used for soft soldering using tin and fluxes. The tip of the soldering iron must under no circumstances be sanded with a file or sandpaper - this will wipe off the factory protective layer of the alloy and lead to a quick burnout of the tip. The heated device should only be placed on a metal stand.

❓ Frequently Asked Questions (FAQ)

1. Can small components be soldered on printed circuit boards (PCBs) with this soldering iron?

For precise SMD electronics and miniature paths, the power of 60 W and the temperature of 490 ° C may be too high – there is a risk of overheating delicate integrated circuits or peeling off paths from the laminate. The HS-060-RB is primarily designed for cables, connectors, plugs and thicker electrical components.

2. Can the tip be cleaned with a file if it blackens?

No. Grottoes of this type are covered with a protective layer. Sawing will destroy this coating, so that the core of the grotto will burn out in a short time. Only damp sponge, brass chips or chemical cleaners for tips should be used for cleaning.

3. Does the soldering iron have a switch on the housing?

No, the device heats up automatically after plugging the plug into a 230 V outlet. After finishing work, remove the plug from the network and put the tool on the stand until it cools completely.

4. Does the device require a special outlet?

The soldering iron is made in the first class of protection, which means that the power cord has grounding. It should be connected to an efficient installation with a protective pin.

5. What to do before the first use?

Connect the soldering iron to electricity and wait about 3 to 5 minutes until it reaches full temperature. At the first heating, gentle smoke may rise from the area of the heater – this is a normal phenomenon of annealing factory maintenance coatings. When the tip is hot, immediately cover its tip with a little tin with flux.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Power	60 W
Parametry	Manufacturer code	5905842525870
Parametry	EAN (GTIN)	5905842525870
Parametry	Maximum operating temperature	490°C
Parametry	Brand	NAC
Parametry	Model	HS-060-RB
Parametry	Supply voltage	240 V
Parametry	Power supply	mains
Parametry	Kind	tip
Parametry	Packaging status	original
Parametry	Batteries included	no
Parametry	Certificates of conformity	CE