Litavimo stotis su karšto oro pistoletu WEP 853D 4in1, maitinimo šaltinis 30V 5A

Trumpai apie prekę

Prekė: Litavimo stotis su karšto oro pistoletu WEP 853D 4in1, maitinimo šaltinis 30V 5A. Kategorija: Lituokliai.

• Gamintojas: WEP
• Modelis: 853D5A
• Galia: 1050 W
• Įtampa: 230 V

!! FAN!!

• Soldering station WEP 853D has built-in power supply 30V 5A
• The station is also equipped with a voltage meter
• Hotair flask stand with automatic switching on and going into standby mode
• Strong tip with original Hakko heating element with a peak power of 72-75W [a tip much stronger than Zhaoxin, Aoyue where the actual power is about 17W]
• The power supply operates in C.C modes. , CV
• Real temperature of hot air and grotto - not all stations have this function
• Automatic cooling of the heater after completion of work
• Includes a set of nozzles

Possibility to buy more than 60 models of nozzles and approx. 80 models of grottoes!!!!

On this listing you buy:

• Station WEP 853D5A
• Hotair flask stand
• Base for tip flask with cleaning sponge, rosin and cleaner
• Tip flask 907F with tip T-B
• Cables for power supply / meter
• Gripper for lifting systems

Nozzle set:

• Round nozzle with a diameter of 4,4 mm
• Round nozzle with a diameter of 7 mm
• Round nozzle with a diameter of 9 mm
• Square nozzle type BGA 12x12mm

Technical data of station 853D 5A 30V

• Robust and ergonomic housing.
• Processor control high operating stability, extending the life of heating elements, energy saving.
• Standby.
• Remembers the last set temperature
• Displays temperature in °C/°F

Hotair soldering iron

• Type Airflow: brushless fan
• Airflow: < 120L/min
• Temperature range: 100°C-480°C
• Temperature stability: ±1 °C
• Display Type: LED Display

Grotowa soldering iron

• Temperature range: 200°C-480°C
• Temperature stability: ±1°C
• Earth Voltage Type: < 2mV
• Tip flask power : 75W
• Ground Impedance Tip : < 2ohm
• Display Type: LED Display
• Heating element: ceramic hook

Charger

• Output voltage: 0 ~ 30V
• Output current: 0~5A adjustable
• Intensity measurement mode: mA/A
• Operating Mode: Test/Power Supply
• Operation in C.C. C.V. mode
• Temperature coefficient: < 300ppm/°C
• DB ripple < 1mvrms (virtual value)
• Regulation: coarse/accurate
• Display Type: LED Display

Voltage meter

The HotAir 853D soldering station is designed for use in electronic service.

The station has a real temperature reading of hot air and grottoes. Not like some stations with the wrong description!!

Soldering station WEP 853D5A is a soldering station 4in1 on:

• Hot air, used for desoldering and soldering electronic systems, e.g. BGA, SMD and etc.
• 75W tip soldering station (original Hakko heating element of Japanese production)
• Service power supply 30V 5A.
• The power supply has full voltage regulation rough, accurate. On the LED display we can see the voltage and intensity.

The station has built-in 4 LED displays informing about the set temperature of hot air and tip, voltage and current. The station also has Hotair blowing force adjustments.

The WEP 853D5A station is designed antistatically ESDSafe which protects soldered components from damage.

Both station modules, i.e. grotto, Hotair and power supply, can work independently of each other.

The station is additionally equipped with an automatic cooling system after completion of work. This effectively extends the life of the heating element.

Thanks to the high power of 75W and the heating speed, the tip station is suitable next to lead soldering for lead-free soldering.

The station has a solid metal housing. The air blowout is carried out through the fan, thanks to which we can be sure of long-term, trouble-free operation with the stability of the blowing force.

NOZZLES:

With the station, you get a set of nozzles, so you can start working with the device right away.

Nozzle set:

• Round nozzle with a diameter of 4,4 mm
• Round nozzle with a diameter of 7 mm
• Round nozzle with a diameter of 9 mm
• Square nozzle type BGA 12x12mm

Readable control panel

• Easy-to-read LED display indicating
• Knobs for adjusting blowing power and voltage
• Temperature control with buttons
• Outputs to power supply and meter
• LED Voltage Display and Analog Intensity

Power supply panel with voltage tester

• LED Displays Voltages 0-30V and Voltages 0-5A
• Power supply switch
• Two operating ranges of current display mA/A
• Switch Voltage Meter / Power Supply
• Regulation: coarse and accurate (voltage and current)

• Short-circuit protection
• Operation in CV mode (stabilization of output voltage)
• Operation in CC mode (stabilization of output current)

• Power switch
• Power socket

• Hotair holder with micro-contact

• At the first start, place the hotair flask on the handle, after setting the parameters and starting, we lift the hotair flask from the handle.

Wires for the meter

• CAT III 1000V 10A
• Length of whole wires about 98cm

• 907F tip barrel designed for WEP/Yihua soldering stations. The flask is equipped with a HAKKO heater and a T-B tip.
• The cable is made of soft, heat-resistant silicone, its length is 80cm.
• 5 pin plug!

Stand for tip flask with

• Cleaning sponge
• Rosin
• With a cleaner

An additional heating element can be purchased at our auctions.

Heating spiral made of thick wire wrapped on a ceramic or mica frame.

• Cables red-blueand connection of temperature sensor
• Cables red connection of the heater

An additional heating element can be purchased at our auctions.

Connecting the heating element

• blue cables for temperature sensor
• red cables for connecting the heater

We have 90 types of tips for soldering iron and 50 types of nozzles at other auctions

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Power	1050 W
Parametry	Product weight with unit packaging	6 kg
Parametry	Manufacturer code	853D5A
Parametry	EAN (GTIN)	5907558240009
Parametry	Maximum operating temperature	480°C
Parametry	Brand	WEP
Parametry	Minimum operating temperature	100°C
Parametry	Model	853D5A
Parametry	Supply voltage	230 V
Parametry	Device weight	6 kg
Parametry	Power supply	mains
Parametry	Kind	2-in-1 (hot air and tip)
Parametry	Packaging status	original
Parametry	Batteries included	no