Lituoklio stotelė HOTAIR WEP 992DA+ su dūmų ištraukimu ir profilių atmintimi

Trumpai apie prekę

Prekė: Lituoklio stotelė HOTAIR WEP 992DA+ su dūmų ištraukimu ir profilių atmintimi. Kategorija: Lituokliai.

• Gamintojas: WEP
• Modelis: 992da+
• Galia: 720 W
• Įtampa: 230 V

• Ability to program 3 programs / 3 work profiles
• Liquid crystal display, not like other stations and other LED manufacturers
• Indicator of blowing force on liquid crystal display.
• Strong tip with original heating element 75W
• Temperature correction function
• SLEEP system
• Possibility to connect a vacuum gripper for lifting elements.

992DAplus_WEPNEW

What's included:

• Soldering station WEP 992DA+ with fume extractor
• Hotair flask stand
• Base for tip flask with cleaning sponge
• Tip flask 908B with T-B tip with fume extractor
• Gripper for lifting systems
• Power cord
• Carbon filters for extraction of vapours from the tip flask

Nozzle set :

• round nozzle with a diameter of 2.5 mm 1124
• round nozzle with a diameter of 4.4 mm 1130
• round nozzle with a diameter of 6 mm 1196
• round nozzle with a diameter of 9 mm 1197
• square nozzle 12x12 mm 1313

The soldering station WEP 992DA+ is characterized by:

• Voltage: 220-240 V
• Power Consumption: 720W
• Working environment from 0 to 50°C
• Compact design with easy-to-read LCD display.
• Controller PID
• Microprocessor parameter control: temperature, blowing power, working time, temperature correction
• Protection against reaching too high a temperature and informing with an alarm.
• Ability to remember 3 work programs (temperature, blowing power)
• Cooling function
• Temperature display mode F/C

Hot air station:

• Air flow source : compressor
• Airflow : up to 28 L/min
• Smooth temperature control throughout the range.
• Temperature range: 100-480°C
• Temperature stability : ±1°C
• Display Type: LCD
• Cable length in flask : up to 90cm
• manual / automatic operation mode
• Protection against reaching too high a temperature and informing with an alarm.
• Displays the actual blowing power

Head station:

• Temperature range: 200-480°C
• Temperature stability: ±1°C
• The heating element 50W peak power during heating 75W peak can be up to 140W.
• Peak power consumption 75 W
• Display Type: LCD
• Resistance to grounding below to 2ohm
• Grounding potential below to 2mV
• System: ESD safe
• Length of flask cable: up to 100cm
• Sleep mode: turned on after idle operation 0-99 minutes.

Soldering station WEP 992DA+ is a soldering station 2in1 for:

• Hot air, used for desoldering and soldering electronic circuits, e.g. BGA, SMD and etc. Blowing in the station is obtained by means of a windmill.
• Stronger tip flask with a peak power of 72-75W (original Hakko heating element of Japanese production)

Soldering station WEP 992DA+ is suitable for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, tid (especially mobile phones).

The station is used for soldering and desoldering electronic components, shrinking, welding plastics, heating.

Soldering iron WEP 992DA+ is a hot air soldering station and tip soldering iron. The station is equipped with a PID microprocessor, which checks the operating parameters of the station in 20ms cycles and corrects them to the set values.

Temperature values, air flow power, operating mode are visible on a large easy-to-read LCD display, which greatly facilitates work.

The hotair soldering iron is equipped with a ceramic heating element, quickly and evenly heating up. The heater is constructed of hard alloys, allowing a long working time at high temperatures, without deforming, this significantly increases the stability of work and extends the life of the heater.

In the holder for the hot air flask there is a micro-contact, which when putting the flask away causes it to go into the waiting state, by cooling the heating element, and then turning off the air supply. This extends the life of the heater and saves electricity.

The station is equipped with functions of controlling proper operation, we receive short circuit messages in the circuit, circuit overload, failure to achieve the set temperature. All these errors are displayed on the display.

Choosing the automatic mode of operation, when we put the flask of hot air on the stand, the device will automatically stop heating and cool to a safe temperature. Thanks to this, we will take care of long, trouble-free operation of the heating element, saving electricity and service safety.

The soldering iron is distinguished by such functions :

3 Work programmes. The soldering station has the ability to remember 3 work programs for hot air and flask. Depending on the type of work assembly, disassembly, we set the appropriate program.

Sleep function for tip soldering iron

1. When the flask is not in use, after a pre-set time from 0-99min it goes into sleep mode.
2. Starting rest, the temperature is reduced to 200ºC, this prevents excessive oxidation of the tip, and this affects its service life and the heating element.
3. Mild movement of the flask. The temperature quickly returns to the set value.

We have the ability to turn off the mode by setting 0

Hot air operation in automatic/manual mode.

By selecting the automatic operation mode, when we put the hot air flask on the stand, the device will automatically stop heating and cool to a safe temperature. Thanks to this, we will take care of long, trouble-free operation of the heating element, saving electricity and service safety.

Choosing the manual work mode, when we often have to solder something, then we save time and increase the efficiency of work. It is recommended to switch to automatic mode before completing the work.

By pressing the knob button, we activate the functions of air cooling

This function is used:

1. Rapid temperature reduction
2. Cleaning dust
3. Cleaning of liquid

Group 908B

• Peak heating power : 75W
• Over 80 types of grottoes
• The flask is equipped with a heater and a T-B tip.
• Plug 6 pin

Extract of fumes from under the tip flask

The smoke generated during the soldering process is immediately suctioned, providing the user with a healthy, eco-friendly working environment

• Temperature correction function. It depends on the working environment, the efficiency of the heating element, the power of the blower, the wear of the tip, all this affects the appropriate temperature correction to receive the set parameter.
• Working in C/F mode. Possibility to set on the display in which units the temperature will be displayed.

What is temperature stabilization?

It is the ability to maintain the set temperature under load, i.e. in soldering traction. Most cheap stations cannot do this because they do not have a feedback loop between the heating element (temperature on the grotto) and the station control. The WEP 992DA+ station automatically selects the appropriate supply current for the heating element, so that the temperature is stable even with high heat consumption

Hot air flask, made of durable plastic, designed for long-lasting work.

An additional heating element can be purchased at our auctions.

Heating spiral made of thick wire wrapped on a ceramic or mica frame.

• Cables red-blueand connection of temperature sensor
• Cables red connection of the heater

Heating element of the tip flask

1. Stainless steel spring, effectively adheres to the housing, so that the flask has antistatic properties, which prevents damage to soldered components.
2. Double-sided printed board.
3. Special metal protective clip. Effectively prevent the cover from loosening

Connecting the heating element

• blue and red cables for temperature sensor
• Wire wire connection heater

Useful tool for:

• removal of IC elements
• lifting small objects, BGA systems, integrated circuits
• dismantling of SMD systems
• precise work in places where classic tweezers cannot be used
• lifting of hot elements
• transfer and placement of circuits on PCBs
• soldering and desoldering

Technical specification:

• Overall length: 143 mm (± 2mm)
• Grip length: 51 mm (± 2mm)
• Grip width: 29 mm (± 2mm)
• Handle diameter: 1 cm (± 1mm)
• Made of: Antistatic plastic

It is possible to purchase and connect the item lifter at our other auctions

• The gripper connects in place of the fume extractor
• Gripper with tips

*The gripper is not included with the station

The soldering station generates an air blowing with a compressor.

ATTENTION

During transport, the compressor is attached to the housing with transport screws. Please unscrew the screws to work

We have about 80 types of tips and about 50 types of nozzles for soldering iron at other auctions

Specifications