Lituoklių stotelė HOTAIR WEP 882D 2in1 su karšto oro pūstuvu ir 900m galingu antgaliu

Trumpai apie prekę

Prekė: Lituoklių stotelė HOTAIR WEP 882D 2in1 su karšto oro pūstuvu ir 900m galingu antgaliu. Kategorija: Lituokliai.

• Gamintojas: WEP
• Modelis: 882D
• Galia: 750 W
• Įtampa: 230 V

By buying from us at HOTAIR Robert Mazurek a representative of the WEP brand, you can be sure of the guarantee and quality of the products sold. We are a Polish company operating since 2011

✅ Official representative of the soldering station manufacturer WEP

✅ 2in1 soldering station - HOTAIR and tip soldering iron for the most popular tips on the market 900M⚡

✅ Low power consumption due to fan ⚡

✅ Smooth temperature control Hot Air: 100 - 480°C ⚡

✅ Smooth tip temperature control: 200 - 480°C ⚡

✅ The hot air flask cools down after putting it down and goes into standby mode is ready for operation.

✅Increased efficiency of the hot air flask up to 120L thanks to the fan ⚡

✅ Quieter operation due to the blower placed in the flask

✅ Compact design – saving space in the workshop

The HOTAIR WEP 882D soldering station is a modern device that combines the functions of hot air blowing and a tip soldering iron. The air blower is carried out using a fan, which provides higher blowing power, quieter operation and lower operating costs. With its high-power heating elements and precise temperature reading, the station can handle even the most demanding soldering tasks with ease. An additional advantage of the device is its compact size. Produced by the renowned company WEP, the 882D soldering station stands out for its superior quality and durability, surpassing the competitive products available on the market in this respect.

HOTAIR as a direct importer and distributor of WEP brands, we provide service, technical support and the lowest possible prices. We offer a full set of accessories, such as nozzles, heaters and spare parts. The WEP brand is distinguished by the largest selection of nozzles.

Here you will also find soldering accessories such as chemicals, mats, fluxes, pastes and handles that will facilitate work and provide professional results

The WEP 882D soldering station has been designed to meet the high requirements of electronic service. The design is well thought out and proven

The Hotair station is equipped with a system for automatic cooling of the heating element after being placed on the holder, which significantly extends its service life and ensures trouble-free operation for a long time.

LED display shows the set temperature value and its actual value during the operation of the soldering iron, which facilitates precise control and brings excellent results.

Functions and possibilities:

• Soldering of electronic components
• Welding of plastics
• Heating and condensation of heat shrink shirts
• Defrosting of frozen parts
• Dissolving adhesives and solders
• Tanning and removal of paints

Repairs in the electronic service are associated with many threats both for the repaired elements and for the service technician. The soldering station ensures the highest safety standards and is designed in accordance with ESD Safe standards.

The soldering flask is equipped with a brushless fan with a soft start and high durability, which provides blowing power up to 120 L/min and high reliability.

In the flask there is a heating element on a ceramic skeleton, built of thick wire covered with mica, which protects against accidental short circuit with the housing. The heater with a power of 700 W guarantees instant heating to the set temperature, enabling efficient work with electronic components and comfortable welding of plastics.

The Hot air flask has a standard outlet size of 22 mm, which provides a large selection of solder nozzles available on the market.

These nozzles fit models: Aoyue, PT, Hakko, Sunnko and many others. At our other auctions, you can buy as many as 80 types of solder nozzles, including BGA, PLCC, SIP, SOP, QFP nozzles and plastic welding nozzles such as BUT, Iron, Super Nozzle and many more.

The nozzles in our station are distinguished by a gap, which allows the removal of excess reversing air, especially at high temperatures and low airflow. This solution significantly extends the life of the heating element and prevents overheating, which is rarely found in other manufacturers.

Included with the soldering station are replaceable nozzles with slot:

• Round nozzle 4 mm: for precise operations requiring focused heating
• Round nozzle 7 mm: for heating medium areas evenly.
• Round nozzle 9 mm: for heating large areas evenly.

Soldering flask model WEP 917GC is a proven and popular flask, characterized by easy availability of consumable parts, such as heating element and tips.

The flask uses 900M type tips, which are widely available on the market – we offer as many as 90 types, including miniwave tips.

The WEP 882D soldering station offers advanced features:

Temperature calibration of both flasks:

During the use of the soldering station, the value of the set temperature may be subject to small deviations, which is a natural phenomenon resulting from factors such as contamination or wear of the tip or heating element. Therefore, the soldering iron is equipped with a digital temperature correction function, which allows precise soldering without problems and with maximum efficiency.

Regulation of temperature and blowing force

• Kolba hot air: Temperature control via buttons (100 – 480°C) and air flow with knob (15 – 100%).

• Tip flask: Temperature control via buttons (200 – 480°C).

Automatic hot air flask dormancy: The automatic temperature lowering function is crucial for extending the life of heating elements and tips. When the device is not in use, the heater temperature is automatically reduced to a safe level, which prevents excessive wear. The user also has the option to disable this feature to adjust the operation of the device to their own needs.

Ready function: With this function, the soldering station is able to quickly return to optimal settings after sleep mode, allowing you to start working immediately.

Automatic shutdown of soldering station: Auto shutdown function provides additional safety and energy saving, shutting down the station after a longer period of inactivity.

Error signaling: The soldering station is equipped with an error signaling system that informs about possible technical problems, which makes them easier to detect and repair quickly.

Solid housing with non-slip feet: The station has a durable housing equipped with non-slip feet, which ensures stability during operation and increases comfort of use.

Soldering station WEP 882D is characterized by:

• Real temperature reading
• Total peak power: 750W
• ESDSafe protection system
• Real temperature reading: Yes
• Temperature Stabilization: Digital PID
• Temperature stabilization function
• Sleep function for hotair flask
• Automatic station shutdown function
• Error signalling
• Hot air temperature LED display and tip
• Dimension:15cm x 9cm x 5,8cm
• Weight: 0,875kg

HOTAIR SPECIFICATION:

• Heater supply voltage: 230V AC
• Spiral heater mounted on a ceramic core with integrated thermocouple type K
• Mica isolation
• Smooth temperature control from 100-480°C
• Length of hotair flask cable: 90cm
• Air supply source: fans flask
• Capacity: 120L/min
• Control: potentiometer

SPECIFICATION OF TIP FLASK:

• Peak power 60W
• Heating element with a power of 45W
• Heater supply voltage: 24V AC
• Temperature control range: 200-480 °C
• Temperature stability (static): ±1°C
• Display Type: LED
• Length of flask cable: 80cm
• Heater: metal with integrated thermocouple type K
• Grounding resistance of the tip:≤ 2 Ω
• Grounding potential of the tip: ≤ 2mV

Handle Needle Tweezers Lift for Service

Useful tool for:

• removal of IC elements
• lifting small objects, BGA systems, integrated circuits
• dismantling of SMD systems
• precise work in places where classic tweezers cannot be used
• lifting of hot elements
• transfer and placement of circuits on PCBs
• soldering and desoldering

Technical specification:

• Overall length: 143 mm (± 2mm)
• Grip length: 51 mm (± 2mm)
• Grip width: 29 mm (± 2mm)
• Handle diameter: 1 cm (± 1mm)
• Made of: Antistatic plastic

The offered set consists of the following elements:

• Soldering station WEP 882D FAN
• Stand for putting down the HotAir flask
• Soldering flask 917GC ESDSAFE with tip
• Stand for putting down the tip flask
• Power cable
• Gripper for lifting systems
• Nozzle set:
• round nozzle with a diameter of 4 mm
• round nozzle with a diameter of 7 mm
• round nozzle with a diameter of 9 mm
• Instruction manual in Polish.

Specifications