Nagų freza STRONG M21, 68 W, manikiūrui ir pedikiūrui

Trumpai apie prekę

Prekė: Nagų freza STRONG M21, 68 W, manikiūrui ir pedikiūrui. Kategorija: Nagų frezos.

• Gamintojas: Allepaznokcie
• Modelis: M21
• Galia: 68 W
• Spalva: white

✔ Milling machine M21 is a way to quickly and effectively work every stylist.

✔ Professional, high-quality milling machine with high power and rotation scale, allows you to work on both manicure and pedicure along with the development of the sole of the feet.

✔ It will work both in the daily work of the nail salon and home use.

✔ Beautiful white color and modern design will be the perfect complement to your office

▶ Quantity: 1 piece

▶ Colour: white

▶ Power: 68W

• adjustable speed of rotation in the range of 0-50 000 revolutions per minute
• the ability to change the direction of rotation left or right
• compact size, not taking up much space
• original, modern design
• Turning on the device using a switch or foot button
• special shelf for putting the head on the milling machine
• set of cutters, carrier and abrasive caps included
• simple cutter replacement system
• display showing the current speed of rotation

• ON/OFF button (on/off)
• R/F button, i.e. rotation switch (right/left)
• MIN/MAX button (speed control)
• touch button allowing you to set the appropriate speed of rotation
• shelf for putting down the milling head
• LCD display, where information about the current speed of rotation of cutters is available

• milling head
• milling machine base
• pedal to operate the device with the foot
• set of cutters
• instructions
• written guarantee
• pedal for leg operation

• Input voltage: 220V AC
• Output voltage: 12V - 1,5A
• Maximum power: 68W
• Rotations: 0-50 000 revolutions per minute

• Length: approx. 14 cm
• Width: approx. 20 cm
• Height: approx. 8 cm
• Cable length: approx. 130 cm

1. Plug the power cord into the outlet.
2. Connect the milling head to the appropriate input in the device.
3. Press and hold the ON/OFF button to turn on the device. To switch the operating mode to manual/foot, hold down the button (ON/OFF - manual/foot control) for a short time.
4. Press and hold the button (MIN/MAX) to increase the speed of rotation. To reduce the speed of rotation, briefly press the button.
5. Switch the rotation button to right/left depending on your work needs.
6. If you are not using a milling machine, remember to always turn off the power cable from the outlet.

▶ Protect your device from contact with water. ▶ Do not use the device:

• in damp rooms,
• if the power supply has been damaged
• if the device or connection cable is damaged
• if the TIMER or CIRCUIT BREAKER is damaged.

The device is designed for indoor use.

⚠ FOR PROFESSIONAL USE, PROTECT FROM CHILDREN.

Attention! ▶ Before the first use, be sure to read the instructions attached to the device! Always disconnect the device from power if you are not using it.

⚠ DO NOT LEAVE THE DEVICE CONNECTED TO THE POWER SUPPLY!

• Please refer to the instruction manual before using the device
• Never open or start ruling when it is connected to a power source!
• Do not replace any parts placed inside the device.
• Clean the device dry.
• Only accessories that are authorized by the manufacturer should be used.
• Service and repairs must only be carried out by qualified personnel.
• Do not allow children to operate the device and do not leave the device on the network when not in use. Use the device only as intended.
• Other types of applications, modifications and modifications of the device are carried out at your own responsibility. Improper use can lead to damage to people and objects. The manufacturer is not liable for damages caused by non-compliance with the instructions.

Specifications