Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: 3 eur
Aprašymas
Trumpai apie prekę
Prekė: Nešiojamas inhaliatorius su dviem kaukėmis suaugusiems ir vaikams. Kategorija: Inhaliatoriai.
- Gamintojas: Kontai
- Modelis: SN017505
- Galia: 2 W
- Spalva: white
✔ Brand: Kontai®
✔ Type: wireless nebulizer (mesh)
✔ Dimensions: 4,5 × 5,5 × 12 cm
✔ Weight: 80 g
✔ Capacity of tank: 18 ml
✔ Power Supply: 2 × AA (not included) or USB
The JSL-W303 nebulizer works in mesh membrane technology. The device can be powered in two ways: by 2 AA batteries or when connected with a USB cable. AA batteries are not included.
Before first use
✔ Make sure the unit is clean and dry.
✔ Check that the membrane tank is properly installed.
✔ Use only liquids intended for inhalation.
✔ Do not use oils, oily liquids or dense liquids.
✔ Do not overfill the tank – the maximum capacity is about 18 ml.
Step by step instructions
1. Open the liquid container.
2. Pour the inhalation fluid so that it covers the membrane (at too low a level, the device may not glow)
3. Close the tank thoroughly.
4. Install a mouthpiece or mask.
5. Plug in the power.
6. Turn on the device with the button.
7. During inhalation, hold the device upright and stable.
8. After the inhalation is complete, turn off the device and empty the tank.
The device lights up but does not produce mist
Most often this means that:
✔ the liquid is not enough,
✔ the liquid does not cover the nebulising membrane,
✔ the device is tilted,
✔ the liquid used is too thick or not suitable for nebulisation,
✔ membrane needs cleaning.
What to do?
Add liquid, position the device vertically and make sure you use the liquid intended for inhalation.
The device shuts itself down
It doesn't have to mean a breakdown.
The nebulizer can turn off automatically:
✔ after about 20 minutes of operation,
✔ when the liquid runs out,
✔ when the fluid level falls below the nebulising membrane.
The device does not work on batteries
Check that the batteries are the right type and have the right parameters.
The device requires 2 AA batteries. Batteries are not included.
If the device does not work on batteries, connect it via a USB cable and check if it works with USB power.
The device leaks
The most common causes of leakage:
✔ unclosed tank,
✔ overcrowded container,
✔ shaking the device,
✔ tilting the device during operation,
✔ dropping or hitting the device.
To avoid leakage, close the tank thoroughly, do not exceed the maximum level and use the device in an upright position.
What not to use in a nebulizer?
Do not use:
❌ essential oils,
❌ oily fluids,
❌ very dense liquids,
❌ preparations not intended for inhalation,
❌ liquids with sediment or particles.
Inadequate fluid can clog the membrane and cause a lack of mist.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | Kontai |
| Parametry | Medical device | no |
| Parametry | Kind | nebulizer |
| Parametry | Color | white |
| Parametry | Operating mode | continuous |
| Parametry | Power supply | battery |
| Parametry | Inhalation rate | 0.2 ml/min |
| Parametry | Average MMAD particle size | 4 µm |
| Parametry | Medication container capacity | 18 ml |
| Parametry | Noise level | 40 dB |
| Parametry | Power | 2 W |
| Parametry | Product width | 5 cm |
| Parametry | Product height | 12 cm |
| Parametry | Product depth | 6 cm |
| Parametry | Respirable fraction | 80% |
| Parametry | Residual value | 0.2 ml |
| Parametry | Product weight | 80 g |
| Parametry | Product weight with unit packaging | 1 kg |
| Parametry | Manufacturer code | intai |
| Parametry | EAN (GTIN) | 5907080006838 |
| Parametry | Model | SN017505 |
| Parametry | Packaging status | original |
| Parametry | Batteries included | yes |
| Parametry | Certificates of conformity | CE |
| Parametry | Customs tariff code | 90192090 |
| Parametry | Set components | mask for adults,mask for children,mouthpiece |



