Nešiojamas taškinio suvirinimo aparatas su LCD ekranu, 5000 mAh, 18650 akumuliatorių gamybai

Trumpai apie prekę

Prekė: Nešiojamas taškinio suvirinimo aparatas su LCD ekranu, 5000 mAh, 18650 akumuliatorių gamybai. Kategorija: Invertoriniai suvirinimo aparatai.

• Gamintojas: no brand
• Modelis: 6941368688520

1.8 inch color LCD screen | 30 adjustable gears | real-time PCB temperature detection | solder joint counting | 2,4A fast charging power bank | reversible screen | smart reminder of low battery charge.

✅We are a professional spot welding machine manufacturer that provides good service while saving your wallet.

✅With CE certification, you can buy with confidence.

Parameter:

Host Size: 112*80*30mm,

Voltage: 4,2 + 0,05 V,

Welding Current: 6-1200A,

Battery capacity: 5000mAh,

Overheating protection: 65℃,

Charging time: 2-3 hours,

Battery life: 800-2000 times,

Battery life: 1000 times+,

Standby current: 20uA,

Storage temperature and humidity: 55 ℃ 50%,

Charging: 5.2V2.1A,

Discharge: 5V2.4A (Note: Try to avoid running out of power to extend battery life)

Good effect of soldered connection:

With this spot welding machine, you'll save more time and work more comfortably.

Full support 0,1-0,25mm nickel element, support 0,25mm, welding nickel element at full power.

Good effect of solder joint:

With this spot welding machine, you'll save more time and work more comfortably.

Full support 0,1-0,25mm nickel element, support 0,25mm, welding nickel element at full power.

Adjustable power output in 30 steps:

Find more suitable output power for different materials for better welding results and more convenient.

Faster charging 2,1 A:

charging current increased to 2,1 A, low standby power consumption, annual protection against low battery charge, brak automatic power off and other functions.

Two functions in one:

It is a spot welding machine, which can also be a charger.

A device with two types of USB2.4A output can be a portable treasure for charging at the same time.

1. display 1,8 in.

2. USB 2.4A output.

3. TYPE-C 2.1A input.

4. welding pencil output interface.

5. long press on/off/switch mode.

6. switching values

7. reset hole

Point soldering pen has a convenient size of about 40 cm:

Too short will be inconvenient to operate and will affect the use, too long will affect the spot welding effect, just right to meet most lithium battery welding.

Size:112mm*80mm*30mm

Specifications