Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: 3 eur
Aprašymas
Trumpai apie prekę
Prekė: Oro filtras Zehnder ComfoAir Q350/Q450/Q600 Aeris F7 G4, 400502013 rekuperatoriui. Kategorija: Dalys.
- Gamintojas: no brand
- Modelis: Zehnder F7+G4
High-quality filter set (F7 + G4) for ZEHNDER ComfoAIR and AERIS NEXT recuperators
Cleaner air and effective recuperator protection
A set of filters F7 + G4 designed for recuperators Zehnder ComfoAir Q350, Q450 and Q600 and Aeris Next 350, 450 and 600. The kit is a high quality replacement for the original ZEHNDER 400502013 set.
The F7 exact filter is responsible for cleaning the air taken from the outside. It retains fine dust, dust, plant pollen and other airborne pollutants before they enter the rooms.
The G4 pre-filter protects the interior of the air handling unit from larger particles such as dust, fibres, insects and other contaminants in the exhaust air.
Compatibility
The set fits recuperators:
➡ Zehnder ComfoAir Q series:
- ComfoAir Q350
- ComfoAir Q450
- ComfoAir Q600
➡ Aeris Next series:
- Aeris Next 350
- Aeris Next 450
- Aeris Next 600
The kit is designed exclusively for ComfoAir Q and Aeris Next series devices. It does not fit the older Zehnder and Aeris 350, 450 and 550 control panels produced before the introduction of the Next series.
Why choose this product?
Complete filtration F7 + G4
The set provides simultaneous purification of supply air and protection of the interior of the control panel from the exhaust air.
Accurate filter class F7
Effectively reduces the entry of fine dust, dust, plant pollen and other small impurities into rooms.
Protection of recuperator
The G4 filter traps larger particles, helping to reduce dirt buildup inside the device.
Stable air flow
Regular replacement of filters helps maintain proper installation performance and reduces the additional load on fans.
Adjustment to the device
The filters have a format suitable for the indicated control panels, so they can be placed in the chambers intended for this purpose without performing additional modifications.
Economic alternative
The replacement allows you to maintain proper filtration of the installation at a more favorable operating cost.
The set includes a set of 2 filters:
✅ pollen filter class F7 (air supply)
- dimensions: 500 x 160 x 23 mm
✅ filter class G4 (exhaust)
- dimensions: 500 x 160 x 23 mm
The perfect choice for
➡ users of Zehnder ComfoAir Q350, Q450 and Q600 recuperators,
➡ owners of Aeris Next 350, 450 and 600 control panels,
➡ people looking for a replacement for the ZEHNDER 400502013 set,
➡ users who want to replace the standard set G4 + G4 – 400502012 with a more accurate configuration F7 + G4,
➡ allergy sufferers and people particularly sensitive to dust and pollen,
➡ houses located in the city, on busy streets or in areas with increased pollination.
When to change filters?
Filters are recommended to be replaced on average every 3 to 6 months. The exact frequency depends on the air quality, season, intensity of ventilation and location of the building.
The exchange should be carried out when:
- The control panel will display a message about filters,
- the filter surface is clearly soiled,
- decreased air flow,
- the device works louder than before,
- There is more dust in the rooms,
- It has been about 3 to 6 months since the last exchange.
About the product
The set consists of two filters with different filtration classes:
- 1 × F7 fine filter – designed to purify fresh air taken from the outside,
- 1 × G4 pre-filter – designed to protect the recuperator from larger contaminants.
The extended surface of the filter material allows effective retention of impurities while maintaining proper air flow.
How to take care of filters?
Regularly check their condition – the frequency of dirt depends, among others, on the season, pollination and location of the building.
Do not wash the filters with water – the filter material is not intended for washing or wet cleaning.
Keep your intake clean – leaves, dust and other contaminants around the air intake can speed up filter clogging.
Replace the entire set – simultaneous replacement of both elements helps maintain the proper operation of the installation.
How to change filters?
- Turn off the ventilation unit according to the instructions of the device.
- Open the filter chamber cover.
- Remove the filters for replacement.
- Place the new F7 filter on the fresh air supply side.
- Install the G4 filter in the second filter chamber.
- Check the direction of air flow according to the markings on the filters or in the recuperator manual.
- Close the lid, start the device and reset the filter replacement counter if necessary.
Specification
- Product Type: Recuperator Filter Set
- Number of filters: 2 pieces
- Filtration Classes: F7 + G4
- Supply filter: F7
- Exhaust/protective filter: G4
- Design: cassette filters, harmonica filters
- Application: mechanical ventilation with heat recovery
- Equivalent kit: ZEHNDER 400502013
- Alternative to configuration: ZEHNDER 400502012 – G4 + G4
- Purpose: Zehnder ComfoAir Q and Aeris Next
- Product: replacement
Additional information
The offered product is a high quality replacement.
Manufacturer names, devices and catalogue numbers are provided solely for the purpose of indicating product compatibility.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | no brand |
| Parametry | Kind | filter |
| Parametry | Manufacturer code | Zehnder F7+G4 |
| Parametry | Packaging status | original |
| Parametry | Batteries included | no |