Oro kompresorius 10 bar, 600 l/min, 3065, alyvos pagrindu

Trumpai apie prekę

Prekė: Oro kompresorius 10 bar, 600 l/min, 3065, alyvos pagrindu. Kategorija: Kompresoriai.

• Gamintojas: Bizon Polska
• Modelis: 3065 Bizon Polska
• Galia: 3 kW
• Įtampa: 400 V

• enlarged valve seats for faster airflow
• original version on forged connecting rods
• Raised head heat sink
• increased compression ratio to 10 BAR
• steel, inter-valve head gasket is used
• oil lubrication, splash lubrication
• 3 ring pistons with a diameter of 65 mm

The compressor is air-cooled and oil-lubricated. Designed for painting, pumping, sandblasting, blowing and for all kinds of work with other pneumatic devices.

1. reinforced paw casts
2. metal air filters
3. thicker head pins (M6 screws replaced with M8 )
4. integrated oil cooler in the compressor body
5. forged connecting rods

• suction capacity max: 600 L/min
• max working capacity: 430 L-min
• required compressor rated speed: 800-1100 r/min
• required min engine power: 3 kw
• Suggested cylinder capacity: 100 to 250 L
• Oil bowl capacity: approx. 1 Liter
• max working pressure: 10 bar
• Weight: about 20 kg
• Piston diameter: 3 x 65 mm
• pulley diameter: 26 cm
• Drive: 2 x 13 mm V-belt
• spacing of fixing screws: 22 x 14 cm
• direction of rotation: left (looking from the side of the wheel)
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• 3 piston compressor (3 x 65 mm)
• oil
• 3 x metal air filter with hepa cartridge
• 1 vent
• 1 infusion stopper

• The compressor is equipped with iron cylinders with increased ribbed (significantly better heat dissipation, an important technical aspect if the compressor is to be used in demanding and long-lasting activities)
• enlarged piston stroke - the result is increased efficiency of up to 600l/min!!
• large, enlarged pulley (26cm), acting as a fan

• better heat flow (heat dissipation) from piston to cylinder which has an even better effect on compressor life
• Seal, i.e.

• spacing of fixing screws: 22 x 14 cm

Includes 3 metal filters with hepa insert

• POLISH BRAND
• We have been operating on the market since 2005
• WE HAVE RICH EXPERIENCE IN PNEUMATIC INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)

Specifications