Oro kompresorius 100 l, stūmoklinis, 12 bar, V2 PROFI

Trumpai apie prekę

Prekė: Oro kompresorius 100 l, stūmoklinis, 12 bar, V2 PROFI. Kategorija: Kompresoriai.

• Gamintojas: Bizon Polska
• Modelis: ZBV10048 Bizon Polska
• Galia: 3 kW
• Įtampa: 230 V

**Free LD100 oil**

• enlarged suction chambers - increased capacity up to 590L/min
• vertical dehydrator with two outputs + REDUCER
• powder coated cylinder with anti-corrosion protection
• steel valve plates
• Two-piston!
• high engine power
• cylinder capacity 100L (real 100l )
• induction motor type (brushlessy)
• direct compressor drive (stripless)
• 2 cast iron cylinders
• built-in 2boot relaxers
• integrated reducer pressure
• oil lubrication of the compressor
• 2 pressure gauges (direct and reducing)
• Quick connector 1/2'' mounted directly into the cylinder!
• practical pressure hose holder

Original oil compressor, 2-piston. The compressor is single-phase, air-cooled and oil-lubricated. Designed for painting, pumping, sandblasting, blowing and for all kinds of work with other pneumatic devices. Our compressor as one of the few has 2 relaxers for easy start-up (start-up and end-up)

The air pump pumps air into a 12 Bar pressure cylinder. The switch (receipt) disconnects the pump when filling a tank of 10 Bar. Thanks to the use of a pump with 20% stock, the unit is not strained, which significantly translates into its service life!

Bottle - real 100L

Together with the compressor you get instructions for use in Polish and declarations of conformity

Product of polish brand

Oil compressor 100L from the renowned brand Bizon Polska. High power and efficiency makes this model perfect for any workshop. It can drive various kinds of pneumatic tools, be used for spray painting, wheel pumping and find other applications.

Equipped with two readable pressure gauges showing pressure.

The enlarged diameter of the turbine affects the high efficiency of air flow, in addition, it prevents the blockage of impurities.

In addition, it is equipped with wheels for easy and trouble-free movement.

The compressor additionally has a capable vertical separator with a reducer - it retains water and oil in the blown air.

ONE OF THE BEST COMPRESSORS ON THE MARKET IN ITS CLASS

• The compressor is equipped with two iron cylinders with increased ribbed piston diameter 2x 48mm (significantly better heat dissipation, an important technical aspect if the compressor is to be used in demanding and long-lasting activities)
• increased suction chambers - result in increased suction efficiency (590L-min)
• increased compressor compression rate to 10bar!!

• better heat flow (heat dissipation) from the piston to the cylinder, which has an even better effect on the life of the compressor
• Sealing, i.e. preventing oil from entering the oil chamber into the cylinder!!

• Large, 5-blade fan resulting in an even more efficient cooling system
• Efficient induction motor with overload fuse with max power consumption 3000 watt
• Additional second output for possible installation of another quick-connector with thread 1/2"

AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Wiking Poland compressors have always been characterized by attention to detail and practical use of high compressor efficiency, which results in:

VERTICAL REDUCER WITH DEHYDRATOR

This fact makes the offered model unique in its class!

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious vertical reservoir and a manual valve for condensate-pollution drain.

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches

Please pay attention to the cylinder finishes, the quality of welds at the highest level, which are made by state-of-the-art welding machines.

• suction efficiency: 540 L-min
• Working capacity 390 L-min
• max pressure: 10 bar
• max engine power consumption: 3500 watt
• Hopper capacity: 100 Liters
• rated power (on motor shaft): 2,25 kw
• number of working sockets:4 (2 xquick connector + 2 outputs in 1/2'' cylinder)
• 230v/50Hz power supply
• Volume: 97 dB
• Weight: approx. 65 kg
• Piston system: V
• Number of pistons: 2 x 48mm
• pressure reducer: YES
• Dehydrator: YES
• overload protection: YES
• built-in starting relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• LD-100 compressor oil - enough for the first fill, correct oil level - 3/4 of the sight glass (entire red dot covered by oil)
• separator with drainer
• 2x metal filter with HEPA cartridge
• 4 mounting screws
• air vent
• 2 anti-vibration feet
• 2 solid, rubberized wheels
• User manual (Polish)
• Declaration of Conformity
• air compressor

🔥 ENLARGED PISTONS – UP TO 48 MM

One of the most important design changes is to increase the diameter of the pistons:

42 mm → 48 mm

The larger diameter of the pistons allows the pump to pump more air during operation.

The compressor achieves:

suction capacity up to 540 L/min

and

maximum working capacity up to 390 L/min.

💨 DOUBLE PISTON V PUMP – PRESSURE UP TO 10 BAR

The compressor uses a two-piston pump in the V system, ensuring high efficiency with relatively compact dimensions of the entire device.

Working pressure: 10 bar

This allows the device to work with a wide range of pneumatic tools and accessories.

⚙ BUILT-IN ADDITIONAL STARTING RELAXER

The compressor is equipped with an additional relaxer, which makes it easier to restart the engine.

Its task is to reduce the pressure remaining in the system between the pump and the tank, so that the engine does not have to immediately overcome the full resistance of compressed air during reboot.

This is particularly important in powerful compressors powered by 230 V.

🛡 ADDITIONAL THERMAL PROTECTION

The motor has overload/thermal protection, which provides additional protection for the device in case of excessive load or temperature increase.

The solution increases operational safety and helps protect one of the most important components of the compressor – the engine.

🔧 METAL AIR FILTERS

Instead of simple plastic housings, solid metal air filters were used.

They protect the pump suction system from contamination and at the same time blend well with the industrial design of the device.

🛒 METAL HANDLE WITH HOSE HOLDER

The large metal transport handle makes it easy to drive and rearrange the compressor.

The design is additionally equipped with a practical holder for storing a pneumatic hose.

After completion of work, the cable can be conveniently hung on the device – without having to store it separately.

(the hose shown in the picture is not included)

Polish Brand!!

Specifications