Oro kompresorius BLACKSMITH BM, 24 l, 10 bar, stūmoklinis, su alyva

Trumpai apie prekę

Prekė: Oro kompresorius BLACKSMITH BM, 24 l, 10 bar, stūmoklinis, su alyva. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: Bm24
• Galia: 2.5 kW
• Įtampa: 230 V

• + oil + filter +dehydrator

• New, improved design!
• enlarged valve seats for faster airflow
• Raised head heat sink
• has a thermal sensor on the motor winding!
• increased compression ratio to 10 BAR
• enlarged diameter of the cooling turbine
• oil lubrication, spray lubrication
• 3 ring piston

• Height: approx. 58 cm
• length: approx. 60 cm
• Width: approx. 33 cm

This model has 2 working connectors! One of them is a quick-connector mounted directly at the cylinder, which allows for maximum airflow.

• Our compressor has a cylinder with approval with a real capacity of 24 Liters !
• tank dimensions: 24 cm x 55 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

In addition, it is one of the fastest 24L compressors in Europe! His punching times:

1. from 0 to 8 bar = 1 min 28 s
2. from 0 to 10 bar = 2 min 15 s
3. 7,5 to 10 bar = 38 s

24L oil compressor from the renowned company KowaL Polska. It is high power max 2,5 kW (3,4 hp) will work perfectly in any workshop. It can drive various kinds of pneumatic tools, be used for spray painting, sandblasting, wheel pumping and find other applications.

Equipped with two readable pressure gauges showing cylinder pressure and pressure on the reducer

This model dissipates heat very well and is characterized by low energy consumption while maintaining high performance parameters.

The enlarged diameter of the turbine affects the high efficiency of air flow, in addition, it prevents the blockage of impurities.

In addition, it is equipped with wheels (2 fixed + 1 rubberized foot) for easy and trouble-free movement.

Thanks to the application of a piston engine with 3 rings, the device is adapted to intensive work.

The compressor additionally has a SEPARATOR - it retains water and oil in the blown air.

ONE OF THE BEST COMPRESSORS ON THE MARKET IN ITS CLASS

• effective suction performance max: 270 L-min
• Maximum pressure: 10 bar
• Operating pressure: 8 bar
• max working capacity: 140 L-min
• max engine power consumption: 2500 watt - 3,4 km
• rated power on the engine shaft: 2200 watt - 3 km
• tank: 24 L
• number of working sockets: 2 x quick coupler
• 230v/50Hz power supply
• Volume: 97 dB
• Weight: approx. 25 kg
• Number of pistons: 1 x 47mm
• pressure reducer: YES
• Dehydrator: YES
• built-in starting relaxer: YES
• induction motor: YES
• cappacitor system: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinder: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• 2 x Rubberized Wheels
• 1 x Rubberized Foot
• dehydrator with reducer
• metal air filter with cartridge
• PL instruction
• 1 vent
• 0,3 L of oil Ld-100 (2 x 0,15L or 1 x 0,3L)
• mounting screws
• Quick coupler for cylinder mounting

- Increased engine power

- Copper motor winding

- Iron cylinder

- Built-in pressure reducer

- Large cooling turbine - quieter compressor operation

- Brushless motor

- Sturdy wheels allow for easy transport to the right place

- Separator

Tip ==> when mounting the filter to the head, screw it in so that it presses against the red plastic housing of the cylinder. This reduces the vibration level of the protective grille during operation

• duralumin piston
• 3 rings on the piston !
• cast iron cylinder
• steel valve plates
• Quiet operation
• increased piston stroke o compared to the previous model
• clear oil level indicator

THIS MODEL STANDS OUT FROM OTHER BRANDS DUE TO THE HIGH "EFFICIENCY" OF THE COMPRESSOR, I.E. A SMALL DIFFERENCE BETWEEN SUCTION EFFICIENCY AND OPERATION, it is a confirmation of the highest quality materials used in the production of the compressor and its manufacture, i.e.:

• steel valve plates
• three-ring piston made of duralumin
• iron cylinder
• large valve seats
• metal intervalve seal!!!

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain.

*

*

*

*

*

*

*

1. Use oil Ld100 or 15w-40
2. The correct oil level is covered 3/4 of the slide (see photo)

• overload protection
• enlarged cooling turbine
• induction motor - brushless
• copper motor winding
• Large, bladed fan resulting in an even more efficient cooling system
• Efficient induction motor with overload fuse with max power consumption 2500 watt
• Additional second output for possible installation of another quick-connector with thread 1/2"

• better heat flow (heat dissipation) from the piston to the cylinder, which has an even better effect on the life of the compressor
• Sealing, i.e. preventing oil from entering the oil chamber into the cylinder!!

Grey cast iron is characterized by high abrasion resistance with good damping properties

The purpose of honing is to "spray" the surface of the finish so that it can stick to the oil film - micro-scratches must be at the right angle to each other to keep the oil on the surface

• automatic pressure switch
• direct manometer
• blue metal splitter
• Direct quick coupler
• automatic relaxer
• powder coated cylinder with anti-corrosion protection
• cycle welded numerically by welding machines - please pay attention to the perfect quality of welds!
• Bottle with homologation !

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches

Please pay attention to the cylinder finishes, the quality of welds at the highest level, which are made by state-of-the-art welding machines.

Specifications