Oro kompresorius COMPRESSOR k46, 150 l, 14 bar, 400 V, alyvos stūmoklinis

Trumpai apie prekę

Prekė: Oro kompresorius COMPRESSOR k46, 150 l, 14 bar, 400 V, alyvos stūmoklinis. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: K46 max14 bar
• Galia: 3 kW
• Įtampa: 400 V

• + oils + filters + dehydrator + swivel wheels !

• New, improved design!
• enlarged valve seats for faster airflow
• Raised head heat sink
• enlarged diameter of the cooling turbine
• oil lubrication, splash lubrication
• 3 piston pump

• Height: approx. 95 cm
• length: approx. 125 cm
• Width: approx. 40 cm

This model has up to 4 quick-connectors! One of them is mounted directly at the cylinder, which allows for maximum airflow.

The air pump pumps air into a 14 Bar pressure cylinder. The switch (receipt) disconnects the pump when filling a tank of 12 Bar. Thanks to the use of a pump with almost 20% stock, the unit is not strained, which significantly translates into its service life!

• Our compressor has a cylinder with approval with a real capacity of 150 Liters !
• tank dimensions: 40 cm x 122 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

The K46 looks great compared to the competition. His 150L cylinder punching times are:

1. 0 to 1 bar = 21 s 430 L/min
2. 0 to 2 bar = 45 s 400 L/min
3. 0 to 3 bar = 1 min 15 s 360 L/min
4. 0 to 4 bar = 1 min 45 s 343 L/min
5. 0 to 5 bar = 2 min 20 s 321 L/min
6. 0 to 6 bar = 2 min 55 s 308 L/min
7. 0 to 7 bar = 3 min 30 s 300 L/min
8. 0 to 8 bar = 4 min 300 L/min
9. 0 to 9 bar = 4 min 30 s 300 L/min
10. 0 to 10 bar = 5 min 300 L/min
11. 0 to 11 bar = 5 min 30 s 300 L/min
12. 0 to 12 bar = 6 min 300 L/min

3 phase oil compressor 150L from the renowned company KowaL Polska. It is high power 3000 watt will work perfectly in any workshop. It can drive various kinds of pneumatic tools, be used for spray painting, sandblasting, wheel pumping and find other applications.

Equipped with two readable pressure gauges showing pressure.

This model dissipates heat very well and is characterized by low energy consumption while maintaining high performance parameters.

The enlarged diameter of the turbine affects the high efficiency of air flow, in addition, it prevents the blockage of impurities.

In addition, it is equipped with wheels (2 fixed + 2 swivel) for easy and trouble-free movement.

Thanks to the application of the 3-piston motor, the device is adapted to intensive work.

The compressor additionally has a SEPARATOR - it retains water and oil in the blown air.

ONE OF THE BEST COMPRESSORS ON THE MARKET IN ITS CLASS

As one of the few companies in Europe, we offer compressors with a modern spacing of head fixing screws.

This allows the compressor to run much longer without damaging the gasket. The central screw screwed through the head into the valve plate additionally supports and presses the gasket crossbar in the intervalve chamber!

In addition, there are reinforced head pins (hardness 10,8).

The competition has on sale compressors with head attachment for 4 screws in such cases, after heating the head, the gasket blows out.

• suction capacity max: 650 L-min
• max working capacity: 430 L-min
• pump type: slow-rotating
• pump speed: 1030 - 1230 r-min
• pressure max: 14 Bar
• working pressure: 12 Bar
• Rated motor power: 3000 watt ( 3 kw )
• Power consumption: 4000 watt ( 4 kw )
• Oil bowl capacity: approx. 1 Liter
• tank: 150L
• number of working sockets: 4 quick couplers
• 400v/50Hz power supply
• Volume: 97 dB
• Weight: approx. 100 kg
• Piston system: W
• Number of pistons: 3
• Piston diameter: 2 x 65 mm + 1 x 51 mm
• pressure reducer: YES
• Dehydrator: YES
• built-in starting relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• equipped with 2 swivel wheels
• power cable: None
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

Our compressor as one of the few has 2 relaxers for easy start-up (start-up and end-up)

• 2 rubberized wheels
• 2 swivel wheels
• hose 10m encased with fittings
• built-in dehydrator with reducer
• 2 x metal air filter with hepa cartridge
• 4 quick couplers
• instruction PL
• 1 vent
• 1 infusion stopper
• 1 Liter of Ld-100 oil (in bottles or poured into a compressor)

- Increased engine power

- Copper motor winding

- Iron cylinders

- Built-in pressure reducer

- Large cooling turbine - quieter compressor operation

- Brushless motor

- Sturdy wheels allow for easy transport to the right place

- Separator

• duralumin pistons
• 3 rings
• cast iron cylinders
• 5 screw heads!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
• steel valve plates
• Quiet operation
• increased piston stroke by about 20% compared to the previous model
• clear oil level indicator

In addition, it is worth noting that the motor with the pump is connected by a belt transmission. This is a low-speed compressor because the number of engine revolutions is translated into about 900 pump revolutions per minute. This significantly increases the service life of the entire unit while maintaining high pump efficiency.

• enlarged cooling turbine
• induction motor - brushless
• cast iron engine body!

Taking into account the weight and size of the compressor, KowaL Polska used a comfortable and most importantly solid transport handle!

• welded in two places (up/down) at the cylinder tube. Unlike other brands where the handle is welded only from the top at the cylinder
• perfectly centered and balanced handle
• handle made of high carbon steel
• does not tremble or make noise during operation
• No need to constantly tighten the screws!
• does not limit access to the switch and quick-connector
• is guided high and manoeuvring does not require excessive bending of the operator!
• and most importantly, it does not protrude behind the front outline of the cylinder, so it does not increase the volume of the entire compressor

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches
• the ideal solution for powering the most demanding pneumatic wrenches. Large unlimited airflow 10 atmospheres!!

• Hose diameter: 8 x 12 mm
• length 10 m
• made of PVC + silicone
• Internal reinforcement: YES
• 2 cuffed quick-connectors
• Operating pressure 12 Bar

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain.

New, aesthetic colors! Powder coated cylinder!

Specifications