Oro kompresorius K25 be alyvos, 100 l, tylus, 10 bar

Trumpai apie prekę

Prekė: Oro kompresorius K25 be alyvos, 100 l, tylus, 10 bar. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: K25+KIT
• Galia: 3 kW
• Įtampa: 230 V

• + hose 5m
• + paint gun
• + oil gun
• + blow gun
• + wheel pumping gun

• catalog symbol K25
• very quiet - LWA 68 dB !
• factory symbol SBN-2200

• Height: approx. 108 cm
• length: approx. 46 cm
• Width: approx. 43 cm

• Our compressor has a cylinder with approval with a real capacity of 100 Liters !
• tank dimensions (without stoppers): diameter 40 cm x length 80 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

What distinguishes oil-free air compressors brand blacksmith from competing offers:

• two-way check valve
• Each piston has a separate filter and its own compressed air outlet
• electromagnetic starting relaxer !
• overcurrent fuse ! boot capacitor
• Very quiet
• Ecological = oil-free!!! No oil particles in the compressed air produced - the compressor is ideal for work where clean air is required
• 2-piston-air pumps - built of connecting rod, Teflon ring, cylinder and valve plate, this design guarantees virtually maintenance-free operation of the compressor.
• Enlarged ribbed heads - heat is better dissipated
• Reinforced pistons and low friction piston rings made of high quality materials
• Modern electric motor preventing excessive vibration of the device - directly on the rotor are placed symmetrically eccentric wheels with bearings and connecting rod
• max capacity on the blowout is up to 280L/min - generated in the initial compression phase
• 2in1 - The compressor is equipped with a separator with a filter and pressure reducer that traps water in the blown air
• Equipped with two readable pressure gauges showing pressure. One of them is combined with reducer and dehydratorm
• Homologated cylinder numerically welded by welding machines - perfect quality of welds! Reinforced compressed air cylinder design - additionally protected with 1 anti-corrosion coating.

• suction capacity max: 390 L-min
• max working capacity at 1 Bar: 280 L/min
• working pressure: 8 Bar
• max pump pressure: 10 Bar
• tank: 100 L
• power consumption: max 3000 watt
• Compressor rated power: 2,2 kw
• duty cycle: s2-15
• 230v/50Hz power supply
• LWA volume with 7m 68 dB!
• Weight: approx. 50 kg
• Piston system: R
• Number of pistons: 2
• pressure reducer: YES
• Dehydrator: YES
• overload protection: YES
• built-in starting relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• Cylinders: Thermally hardened

• Compressor 100L 2 pistons
• integrated dehydrator with reducer
• 1 anti-vibration foot
• 2 running wheels with rubberized raceway
• 2 filters with HEPA cartridges
• metal handle
• Mounting screws
• snake 5m
• painting gun
• oiler
• blowing gun
• pistol for pumping wheels

1. Each cylinder has its own air filter
2. very quiet - only 68 dB !
3. Each cylinder has its own air outlet
4. 2 outlet pipes reinforced with steel braid
5. Check valve with 2-way air intake!
6. Electromagnetic relaxer!

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures up to 99% of pollutants from the exhaust air (water, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain

• powder coated cylinder
• cycle welded numerically by welding machines - please pay attention to the perfect quality of welds!
• Bottle with homologation !

✅BLACKSMITH: Larger crankcase, about 30% more cooling holes ensure better airflow throughout the engine stator, which translates into cooling of each pump element. We get longer service life and work efficiency.

❌OTHER: Small crankcase. No adequate number of cooling holes, no airflow through the entire housing. They overheat easily, which reduces work efficiency and leads to serious engine failures.

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches
• the ideal solution for powering the most demanding pneumatic wrenches. Large unlimited airflow 10 atmospheres!!

✅BLACKSMITH: The large cooling system provides 20 - 30% more cooling. More cooling air means lower pump temperature during operation, which significantly extends its service life. Diameter of radiator housing 134 mm !

❌OTHER: Small Ø90-115mm system, small air flow, inability to cool the pump, easily overheats which can lead to fire. High temperature also significantly reduces the life of the pump.

• BRAND blacksmith - 15 YEARS OF EXPERIENCE IN THE PNEUMATIC INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)
• ONLY WITH US THIS CLASS PRODUCT AT SUCH A LOW PRICE WHICH WILL BE USED IN ALL CONDITIONS IN WHICH IT WILL WORK!

Specifications