Oro kompresorius TUXING su automatiniu išsijungimu ir įmontuotu paintbolo adapteriu

Trumpai apie prekę

Prekė: Oro kompresorius TUXING su automatiniu išsijungimu ir įmontuotu paintbolo adapteriu. Kategorija: Kompresoriai.

• Gamintojas: TUXING
• Modelis: TXES062
• Galia: 0.3 kW
• Įtampa: 12 V

🔥 【PCP compressor 300 bar TUXING】Professional, Portable and Extremely Fast！

• TUXING BRAND

Looking for a reliable PCP compressor that

Can he handle any challenge in the field and at home? Introducing the technologically advanced PCP compressor by TUXING – a combination of 350W power, a maximum pressure of 300 bar (4500 PSI) and intelligent solutions that redefine the concept of portability and convenience.

Specification

• Voltage: 220V AC/12V DC
• Power: 350W
• Weight:10KG/22LB
• Grease oil: oil-free
• Noise: less than 60DB
• Working pressure: 30Mpa/300Bar/4500Psi
• Close: automatic
• Media: HPA
• Cooling method: embedded fan
• Product condition: New
• Filling time: ~0.5L in 11 minutes
• Working cycle: 25 minutes of work / 10-15 minutes of break
• Package Contents: Compressor, EU power cable, 12V adapter, basic accessories
• Ideal for: PCP carabiners, paintball cylinders, diving (with appropriate adapter). Shipping from a warehouse in the EU!

Why is our portable PCP compressor a revolution?

🏆 Power and Speed of the Next Generation：

350W motor: Our PCP pump is equipped with a powerful 350W motor, which guarantees up to 20% faster filling compared to popular 300W models. You will save valuable time at the shooting range or hunting.

Fast cooling: Built-in Fan Cooling actively dissipates heat, ensuring stable performance throughout the recommended 25-minute duty cycle.

⚡ Dual Power & Ready in 60 seconds：

All in one: Unique vertical design with built-in cable spool (Unique Vertical + Wire Spool) and integral power sockets (Home & Car Power Socket). You no longer need to carry separate wires – just pull the appropriate cable from the clipboard in the housing.

Plug & Play: Connect to a 220V network or directly to your car (12V socket) and start working in less than a minute. This is the essence of a real portable PCP compressor.

🛡 Advanced Safety & Clean Air：

Intelligent Auto-Stop: Set the desired pressure on the pressure gauge (Pressure Gauge) and the compressor will automatically turn off (AUTO STOP) when it reaches it. Always under control.

Comprehensive equipment protection: Built-in moisture separator (Oil/Water Separator), temperature sensor (Temperature Gauge) and safety valve (Bursting Disc) ensure that only clean, dry and safe air enters your PCP weapon or cylinder.

Maintenance-free design: Oil-free and water-free (No Need Oil/Water) – zero maintenance, only clean performance.

🎯 Who This Compressor Is For 300 bar？

Hunters and Riflemen: Fast loading of PCP rifles and pistols.

Paintball Players: Filling HPA cylinders in field service.

Divers-Recreational: Charging small cylinders (with the appropriate adapter).

Package Contents

• 1× TUXING TXES062 Main Unit (with wire spool) – the core air compressor
• 1× Household 220V Power Cable
• 1× 12V Car Battery Cable (red/black clamps)
• 1× Power Converter
• 1× High‑Pressure Air Hose (yellow section with built‑in filter)
• 1× Oil/Water Separator (pre‑installed)
• 1× Spare Filter Cotton
• 1× Repair Kit (seals & consumables) – keep your compressor pump in top shape
• 1× User Manual (English/Chinese)

APPLICATION SZerokie

(1) There is one switch inside, turn left is 110V, turn right is 220V. Pls double check to meet local power supply. (We will customize it before shipping for power supply in your country)

Important: Make sure the converter matches the local power supply voltage.

(2) Tighten the screw below the compressor. Install the hose and tighten the release valve

(3) Connect the compressor filling hose to the air tank or other equipment.

(4) Turn on the compressor fan press the switch (button on the right); Let the compressor fan run about 2 minutes. Turn on the compressor (left side button)

IMPORTANT: First the fan works, then the compressor. If not, the owner and/or operator shall be solely responsible for any damage or injury.

(5) Turn off the compressor after the desired pressure is finished.

Note: Keep the compressor fan running for about 2~3 minutes.

(6) Turn off the fan at last.

(7) Disconnect the filling hose from the tank, air cylinder.

❓ How does the auto shut‑off work on this 4500psi compressor?

Simply set your desired target pressure using the pressure adjustment dial (e.g., 300BAR). Once the pressure reaches the set value, this air compressor pcp will automatically shut off. You don't need to stand by and monitor – the machine stops itself, eliminating over‑inflation risks.

❓ What do the E1 and E4 error codes mean on this pcp air compressor? How should I respond?

E1 means the internal temperature has exceeded 85°C – the system has shut down automatically. Turn off the power and allow the machine to cool naturally (about 15‑20 minutes) before restarting. E4 indicates one of two things: ① the machine has reached your preset target pressure and stopped; OR ② the machine has been running continuously for more than 25 minutes. In either case, allow the machine to cool for 15 minutes before continuing. Both protection mechanisms prevent overheating damage to this airgun compressor.

❓ Does this air compressor need lubricating oil?

No. This unit uses oil‑free piston technology – no daily lubrication required. If you ever need to lubricate the piston for maintenance, use only 100% treadmill‑grade silicone oil. Never use regular motor oil or petroleum‑based lubricants. This makes it a low‑maintenance high pressure air compressor.

❓How long does it take to fill a typical air gun cylinder?

Filling a 0.5-letter (500 ml) cylinder from 0 bar to 300 bar takes approximately 18 minutes. For smaller cylinders (e.g., 0.2 to 0.3 liters), it may only take 6 to 8 minutes. The exact time depends on the pressure and volume.

❓How do I activate the cooling system?

The air cooling system automatically activates when the power is connected and the compressor starts—no additional switch is needed. This ensures the compressor always runs cool, preventing damage from forgetting to turn it on.

❓Can the compressor fill a 3L cylinder?

We recommend filling 0-0.7L at a time. Each filling should last 25 minutes, followed by a 10-minute rest. Therefore, filling a 3L cylinder should be done in four stages.

Specifications