Oro rekuperatorius WALLER su WiFi, CO2 jutikliu ir nuotolinio valdymo pultu

Trumpai apie prekę

Prekė: Oro rekuperatorius WALLER su WiFi, CO2 jutikliu ir nuotolinio valdymo pultu. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: Reventon
• Modelis: Rekuperatorn ścienny Reventon WALLER WIFI CO2

REVENTON WALLER WIFI CO2 (20/40/50 m3/h) wall-mounted room recuperator with WiFi, CO2 sensor and remote control included

The WALLER Wi-Fi series heat recovery unit is designed for ductless ventilation of rooms such as: a room, an office, a café, etc. This device is designed for wall mounting. The device has a WIFI module, so you can control it using a smartphone app and connect several devices to work in sync. Additionally, WALLER WIFI CO2 has a bypass and room ventilation function, which is possible thanks to the use of a CO2 sensor. Thanks to the use of a reversible fan, the recuperator is a complete supply and exhaust device, enabling energy recovery from exhaust air. WALLER can also operate in ventilation mode, as a supply-only or exhaust-only device. In such a case, complete mechanical supply and exhaust ventilation can be provided by, for example: two WALLER devices working synchronously, where one supplies fresh air to the room and the other exhausts the used air. The recuperator can also be controlled using the wireless remote control included in the set.

Recuperator for rooms max. approx. 30 m2 and smaller.

Please contact us by phone or e-mail (tel. 888*055*347 or sell@ogwent. en) in order to confirm the availability of the device's storage capacity.

Built-in Wi-Fi module and CO2 sensor

The WALLER WIFI recuperator is equipped with a Wi-Fi module that allows wireless control of the device and control of operating parameters from the mobile application.

Operating modes of recuperator:

1. Ventilation mode: The diffuser operates in exhaust or airflow mode at the set speed. In the case of synchronous operation of two connected fans, one unit operates in airflow mode and the other in exhaust mode.
2. Recovery mode: The recuperator works in two cycles of 75 seconds to ensure heat and moisture regeneration:

Interval 1: Warm, polluted air is drawn out of the room and flows through a ceramic exchanger that gradually absorbs heat and moisture. 75 seconds after starting heating, the recuperator switches to blowing mode.

Interval 2: Fresh and cold outside air flows through the heat exchanger and absorbs accumulated moisture and heat, so that the supply air has a room temperature. After 75 seconds, when the energy regenerator cools down, the fan switches to air exhaust mode. The cycle starts all over again.

Advantages of the product:

• Alternating air supply and exhaust
• LEDs indicate operating mode
• Maintaining heat recovery and humidity levels
• Easy installation
• Automatic blinds
• Low energy consumption
• Low noise
• Prevention of mold formation
• Ceramic heat and moisture exchanger
• External lampshade to prevent water runoff
• Built-in WiFi module for remote control and unit connection.
• Built-in CO2 sensor
• Bypass function

The set consists of:

1. WALLER WIFI CO2 Wall Mounted Recuperator
2. Built-in WiFi module
3. Built-in CO2 sensor
4. Remote control
5. Gasket call.
6. Mounting accessories (mounting plate, nut, screw, mounting pin, plastic ventilation duct)
7. User manual with Warranty Card

Technical data:

• Power supply: 220-240V
• Power Frequency: 50-60Hz
• Max. Power consumption: 7,8 W
• Max. Power consumption: 0.06 A
• Max rotation: 2200 rpm
• 3 fan speeds - airflow: 20/40/50m3/h
• Max. volume at 3rd gear at 1,5m distance: 32.7 dB(A)
• Efficiency of temp recovery. max: 97%
• Resistance class: IPX4
• Mounting/through hole diameter: 170 mm
• Energy class: A
• Installation: through the wall, panel ext. wall-mounted
• Weight: 4,2 kg

Wireless operation in pairs to ensure balanced ventilation

One recuperator delivers fresh air for 75s, while the other draws used air out of the room for 75s for a balanced ventilation system.

*Tested operation at a distance of 30m without interference. In practice, it is recommended to install at a distance of 8-15m

Installation should be avoided with devices that may cause severe interference.

Are you looking for a cost-effective and reliable device to improve ventilation in your home or office?

Efficient and compact device for ventilation with heat recovery. WiFi remote control and CO2 sensor built into the device.

Free dos tawa in PL.

We advise and help you choose the right device for you.

We also sell heat pumps, other recuperators (air handling units), air conditioners and air purifiers.

Please contact us by phone or e-mail (tel. 888*055*347 or sell@ogwent. en) in order to confirm the availability of the device's storage capacity.

Specifications