Palapinė sandėliavimui DAS 560 S, 4x4 m

Trumpai apie prekę

Prekė: Palapinė sandėliavimui DAS 560 S, 4x4 m. Kategorija: Paviljonai ir palapinės.

• Gamintojas: Das Company
• Modelis: Namiot ogrodowy imprezowy 4x4
• Ilgis: 4 m
• Plotis: 4 m
• Aukštis: 3.1 m
• Spalva: multicolor

ATTENTION!!! The subject of the auction is a tent in the color "Grey"

Summer construction Summer

• Material steel galvanized
• Corrosion protection with zinc
• Diameter of structural pipes approx. 38mm
• Thickness of structural pipes approx. 1.2mm
• Diameter of connectors approx. 42mm
• Thickness of connectors approx. 1.3mm
• Mounting screws passing through
• Stable feet 6 x 9 cm

The design is solid and easy to assemble. Thanks to this, in addition to the quick folding, the tent can be easily moved to any place.

1. New Slide & Roll system. Each of the entrances has three locks, dividing it into two independent segments, which can be expanded sideways or rolled upwards. This allowed one person to open the entrance.

2. The Over Top system increases entry. Thanks to the use of a special indentation in the roof, we obtain HIGHER ENTRY than the side wall.

Each entry has three locks, dividing it into two independent segments

This allows you to:

1. Extend one part.

2. Extend the entrance both ways.

3. Roll up one part or the whole.

4. Get an entry with full tent width.

1 - Roof SD PVC (polyvinyl chloride) approx. 560g/m2 2 - Double ventilation on both sides 3 - Slide & Roll entrances 4 - Strong YKK zippers at the entrances 5 - Velcro seals 6 - Replaceable covers with Velcro seals 7 - SD PVC side walls approx. 2 x 2 m (polyvinyl chloride) approx. 500g/m2 - Mosquito net 140 x 130 cm 8 - Additional retention apron

It is possible to connect tents in any way. You can put them next to each other or using a special gutter - one after the other. The gutter will not only connect the tents, but also seal the tarpaulin and prevent water, dust and other dust from getting inside. Thanks to the gutter, you will gain more usable space of the tent in a safe and simple way.

Innovative technology of material production

1. PVC layer

2. Mesh embedded between PVC layers

3. PVC layer

4. Lacquer layer

Tarpaulin with a thick material guarantees tightness and durability. It is resistant to UV rays and temperature fluctuations. Provides water resistance and prevents water condensation.

Tear strength: 2400/2300 N/5 cm

Tear strength: 250 N

Temperature range: -40°C to +60°C

ATTENTION!

The PVC sheathing we use (polyvinyl chloride) is much stronger than polyester.

Air Control system

On both sides of the roof there are double vents with rolled shutters. This allows you to maintain proper air circulation. Thanks to this, inside the tent no sauna effect is created, and water should not condense on the walls .

Hermetic system

Each piece of plating has sewn Velcro, which ensures their optimal fit. In addition to affecting the great aesthetics, Velcro guarantees the tightness of the tent against: dust, dust or cold air.

Placed on the side walls of the additional retention apron, it ensures effective draining of water outside during rainfall. This guarantees protection against puddles in the middle of the tent.

The tent has sealing grilles, mounted on Velcro. They are available in different color variants. This allows you to quickly and easily change the color of the tent.

1. Red
2. White
3. Green
4. Gray
5. Blue

Detailed information on color availability in the Delivery and Payment section

ATTENTION!

One tent may have several grille colors.

Example message to seller:

• "Please send me the green color grilles."
• "Please send me the grilles of color: 5 green, 4 red and 1 blue"

Entrances and side walls (each approx. 2 m length) are separate segments mounted with special mounting rubbers - so you can create any arrangements of your tent.

Example configurations in the image:

1. Closed main entrances/entries and detached one wall in the middle of the tent.

2. Closed main entrances/entries and detached two walls in the middle of the tent.

3. Open main entrances/entries and detached all walls on one side of the tent.

4. Dismantled main entrances/entries and all tent walls.

ATTENTION!

5-6. In the picture we show that you can raise the side walls. This is not included, you can buy it at other auctions.

You can order individual plating elements in different variants:

1. Walls with windows

2. Full walls

3. Walls with mosquito net and blinds

1 - Construction pipes fi 38 mm 2 - Construction connectors fi 42 mm 3 - Steel rope on entrances 4 - Strong screws passing through 5 - Foot 6 x 9 cm

We use the highest quality steel protected with galvanization. This increases the strength of structural elements, provides protection against corrosion and guarantees long-term operation. Support pipes have a diameter of fi 38 mm

Pipes have thick connectors fi 42 mm. They are all galvanized, making their durability even greater.

In the upper part of the structure there are steel ropes. Thanks to them, the structure is stiffer and more stable. They also allow you to move the entrances freely.

Screws passing through were used to connect the elements in the structure. This treatment provides the greatest stability.

The stable construction of the tent is provided by feet 6 x 9 cm with anchor holes. The alloys were galvanized, which increased their durability. They ensure a solid attachment of the tent to the ground almost on any surface:

1. Earth
2. Grass
3. Stone
4. Concrete
5. Terrace tiles
6. Ankle
7. Openwork panels

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Type	tent
Parametry	Manufacturer	Das Company
Parametry	Number of side walls	4 walls
Parametry	Color	multicolor
Parametry	Length	4 m
Parametry	Width	4 m
Parametry	Height	3.1 m
Parametry	Manufacturer code	Namiot ogrodowy imprezowy 4x4
Parametry	EAN (GTIN)	5903425007751
Parametry	Packaging status	original