Panardinamas vandens siurblys DIVER, 3150 W, 1500 l/val.

Trumpai apie prekę

Prekė: Panardinamas vandens siurblys DIVER, 3150 W, 1500 l/val.. Kategorija: Siurbliai ir hidroforai.

• Gamintojas: no brand
• Modelis: POMPA DO BRUDNEJ WODY GŁĘBINOWA ZANURZENIOWA

✅ Pump water out of your basement, tank or garden without manually selecting 💧

Did the water accumulate in the basement, tank or place from which it needs to be pumped quickly?

➡ The Force Tools pump is an immersion electric pump that you can use to pump out and move water in your household, garden or work around the property.

The pump has an aluminum body, a convenient carrying handle and a discharge port to which you connect the appropriate cable.

✅ The most important advantages

⚡ Rated power 3150 W – parameter specified on the device and packaging.

⬆ Maximum lifting height of 20 m – allows you to pump water to a higher level.

💧 IP68 immersion design – the device is designed to work after immersion according to the instructions.

🔩 Aluminum body – a robust housing prepared to work in demanding environments.

🔌 Power supply 230 V / 50 Hz – you connect the pump to a standard network installation with appropriate protection.

🔧 Exhaust connector 20 mm – allows you to connect a cable tailored to the pump output.

🛡 Thermal protection – helps protect the device in case of overload or improper working conditions.

👐 Transport handle – facilitates the transfer and correct positioning of the pump.

✅ Lifting height up to 20 m – pump water where it is needed ⬆

It is not always enough to move water a few meters on flat ground. Sometimes you need to pump it out of the recess, basement or tank to the next level.

➡ The maximum lifting height is 20 m.

This is a useful m.in. during:

✅ pumping water from lower places,

✅ pumping water between tanks,

✅ work in the basement and around the house,

✅ use on the farm,

✅ selected work related to irrigation.

⭐ You don’t have to move water manually – the pump does the work for you.

✅ For basement, tank and work around the house 🏠

The manual indicates the pump primarily for pumping water from places where its excess has accumulated, and for moving water from one place to another.

You can use it m.in. to:

💧 pumping water from the basement,

🛢 emptying tanks,

🌳 work on the farm and garden,

🚿 pumping water between tanks,

🌱 selected work related to irrigation.

➡ This is practical equipment for situations where you need to efficiently get rid of more water.

✅ Aluminum body and metal construction 🔩

The pump works in an environment where it is in constant contact with water, so the design of the housing is important.

➡ The pump has an aluminum body, and the lower part of the device has been equipped with an inlet cover limiting the entry of larger elements directly into the pump.

There is also a large handle at the top, for which you can carry the device more safely.

Important: The pump should not be lifted or suspended by the power cord.

✅ 20 mm connector – convenient connection of the cable 💦

The pump is equipped with a outlet with a diameter of 20 mm.

➡ You can connect a properly selected discharge cable to the nozzle and direct the water to the desired place.

Before starting work, make sure that:

✅ the cable is properly fixed,

✅ is not bent,

✅ the pump inlet is not blocked,

✅ pump does not run dry.

✅ Thermal protection – the pump interrupts operation at too high a temperature 🌡

During operation, the pump is protected by thermal protection, which reacts when operating conditions become too demanding.

➡ If the water temperature exceeds 35°C, the protection may interrupt the operation of the device to reduce the risk of overheating.

For the user, this means:

✅ additional engine protection,

✅ lower risk of working in inappropriate conditions,

✅ automatic interruption of operation when the water temperature is too high.

⭐ The pump should be used in water with a temperature not exceeding 35°C.

✅ Immersion work – remember about the correct setting 💧

The pump should be set stably at the bottom of the corresponding recess or tank.

The instructions shall pay particular attention to:

✅ do not start the pump dry,

✅ ensure free access of water to the inlet,

✅ do not hang the device by the cable,

✅ regularly check the condition of the inlet and remove deposits,

✅ always disconnect the pump from the power supply before cleaning.

➡ Proper setup and regular cleaning help maintain proper flow and reduce the risk of damage to the device.

✅ Technical specification 📃

• Brand: Force Tools
• Type: submersible water pump
• Power: 3150 W
• Power supply: 230 V / 50 Hz
• Maximum lifting height: 20 m
• Exit diameter: 20 mm
• Rotary speed: 2850 rpm. /min
• Protection rating: IP68
• Body material: aluminium
• Transport handle: yes
• Power supply: yes
• Plug: network with grounding

✅ Force Tools electric pump – when the water just needs to be pumped out

➡ You immerse the pump, connect the appropriate cable, set it according to the instructions and you can start pumping water.

Aluminum construction, lifting height up to 20 m and mains power supply make it a practical device for work at home, in the basement, garden and farm.

Specifications